Get Your Original Panasonic Chrysler Uconnect 8.4 RE3 Radio Code
Panasonic | Chrysler | Instant Retrieval
How the refund works.
Compatible Serial Number Prefixes
| Serial Prefix | Status |
|---|---|
T00AM |
Supported |
T00BE |
Supported |
If your serial starts with any prefix above, we can recover your code.
Three steps to your code
The whole process needs one piece of information and a few minutes.
- 1 Locate the serial number Look for it on the chassis label. The radio normally has to come forward a little - the wiring can stay plugged in.
- 2 Type it in the form Just the serial and your email. The validator runs before the payment step.
- 3 Unlock the radio The code appears the moment the payment clears, and a copy goes to your email. Save it - the same four digits work for the life of the radio.
Covered by a full refund if the code does not work on your unit.
The photo is a stand-in: your radio wears the same kind of label.
Confirm Your Radio Model
Not sure if your vehicle is fitted with the Chrysler Uconnect 8.4 RE3? Check the design, controls, display and features listed below against your factory radio.
Identifying details:
- 8.4" touchscreen set into the middle of the dash
- A non-navigation unit: the menus never show a map
- The chassis label carries the RE3 sales code
- Serial number starting with T00AM, T00BE
You most likely have the Chrysler Uconnect 8.4 RE3 if:
- the factory label reads RE3
- the serial on the label starts with T00AM, T00BE
- the vehicle was built between 2015-2017
- the screen is the 8.4" touchscreen fitted to the Uconnect 8.4
RE3 is non-nav. If maps draw on NAV, you have an RB-series unit instead. RE3 and RE2 differ mainly by firmware revision and processor speed - the part number sticker is the cleanest way to tell them apart.
Where to Find Your Chrysler Uconnect 8.4 RE3 Serial Number
The code is generated from the radio's own serial number, so that number is the only thing you need before ordering. It is printed on the chassis label of the unit itself, not in the vehicle documents.
On this unit: Top of the chassis label. Three 7mm bolts release the radio behind the trim bezel.
Three steps to the serial number:
- Bring the radio out of its slot; release keys do it in a minute and nothing needs disconnecting.
- Read the serial from the factory sticker on the housing, next to or under the barcode.
- Enter it character for character - no spaces, no dashes.
Your serial lives on a label like this
Watch the whole process
From our YouTube channel - the same steps apply to this unit.
About the Chrysler Uconnect 8.4 RE3
Fitted as factory equipment in selected Chrysler models, the Chrysler Uconnect 8.4 RE3 handles audio playback and vehicle integration from the factory. Depending on the version, it can also add Bluetooth, touchscreen operation, CD/DVD playback, navigation or wider multimedia support.
Uconnect 8.4 RE3 is the mid-cycle Panasonic 8.4-inch non-navigation head unit - same face as RE2 but with refreshed firmware and faster boot. No built-in maps; RE3 is the non-nav sibling of RB5.
The Chrysler Uconnect 8.4 RE3 was installed in various Chrysler models between 2015-2017. It was commonly fitted to vehicles built on the Panasonic multimedia platform and is still one of the more recognisable factory radios of that period.
Common features on this unit:
8.4" touchscreen
AM/FM radio
Hands-free Bluetooth with audio streaming
Media playback over USB
SiriusXM satellite radio*
Steering wheel control support
Anti-theft security code
*Availability depends on the vehicle specification.
Like many factory-installed radios, the Chrysler Uconnect 8.4 RE3 is protected by an anti-theft system. If power is interrupted after replacing or disconnecting the vehicle battery, the unit may demand the original radio code before it can be used again.
Platform details and official documentation are available from the official Uconnect site.
Typical Ways a Chrysler Uconnect 8.4 RE3 Gets Locked
A locked Chrysler Uconnect 8.4 RE3 is almost always the result of one of four everyday situations, none of which mean anything is broken.
A repair cut the power
Alternator, starter or fuse-box work usually means disconnecting the battery - and the radio arms its anti-theft as a side effect of the repair.
You bought the car used
No handbook, no code card, seller unreachable - none of it matters. The radio's own serial number carries everything needed to calculate the code.
A battery swap
Any battery work counts as a power cut to the radio. It locks automatically and waits for the original code before playing again.
A replacement radio
A used unit from a donor car arrives locked, and the code from your old radio will not fit - the code follows each radio's own serial number, so order it for the serial on the REPLACEMENT unit.
Whichever of these applies, the fix is identical: the serial number off the radio, the form at the top of this page, and the code is emailed in seconds.
Chrysler Uconnect 8.4 RE3 Specifications
| Specification | Value |
|---|---|
| Manufacturer | Panasonic |
| Radio Family | Uconnect 8.4 |
| Variant | RE3 |
| Vehicle Brand | Chrysler / Dodge / Jeep / Ram |
| Production Years | 2015-2017 |
| Display | 8.4" touchscreen |
| Navigation | No |
| Serial Prefixes | T00AM, T00BE |
The exact functionality of the Chrysler Uconnect 8.4 RE3 depends on the vehicle it was installed in. Some versions include full multimedia features like navigation and Bluetooth, others ship in a more basic configuration. Features vary by production year, trim and regional specification.
Supported Part Numbers 55
Every reference below is handled by this service. Find yours on the chassis label of the radio to confirm you are on the right page.
The 55 references boil down to 6 base numbers - the trailing letters (AA, AB, ZC and so on) are hardware revisions of the same unit, and every revision is supported.
P05091036AA
P05091036AB
P05091036AC
P05091036AD
P05091036AE
P05091036AF
P05091036AG
P05091036AH
P05091036AI
P05091036AJ
P05091036ZF
P05091036ZG
P05091036ZH
P05091461AA
P05091461AB
P05091461AC
P05091461AD
P05091461AE
P05091461AF
P05091461ZA
P05091461ZB
P05091461ZC
P05091461ZD
P05091461ZE
P05091461ZF
P05091461ZG
P05091461ZH
P05091461ZI
P05091461ZJ
P05091461ZK
Show all 55 part numbers
P05091461ZL
P05091461ZM
P05091461ZN
P05091461ZO
P05091461ZP
P68210557AE
P68210557AF
P68210557ZA
P68210557ZB
P68210557ZC
P68210557ZE
P68210557ZF
P68210557ZG
P68240133AA
P68240133AB
P68240133ZA
P68240133ZB
P68283421AA
P68283421AB
P68283421ZA
P68283421ZB
P68308775AA
P68308775AB
P68308775ZA
P68308775ZB
You will find the part number on the chassis label of the unit, normally alongside the serial. A match in this list confirms you are on the right page for the Chrysler Uconnect 8.4 RE3.
Cars Equipped with the Chrysler Uconnect 8.4 RE3
| Vehicle Model | Typical Production Years | Notes |
|---|---|---|
| Chrysler 200, 300 (base/mid trims) | 2015-2017 | |
| Dodge Charger SXT, Challenger SXT, Grand Caravan SXT, Durango SXT | 2015-2017 | |
| Jeep Cherokee KL Latitude, Wrangler JK Sport/Sahara | 2015-2017 | |
| Ram 1500/2500/3500 Big Horn, Lone Star, Express | 2015-2017 |
Vehicle compatibility can vary between trims, model years and regional versions. Because the same car could leave the factory with different radios, identify your unit before placing an order.
Putting the code into the radio
The code goes straight into the radio, not into the car's menus.
- Switch the ignition on and let the radio boot to its security screen.
- The code prompt appears with its own keypad.
- Enter the four digits in the order you received them.
- As soon as the last digit lands, the radio runs the check on its own.
- On a correct code the radio leaves security mode and plays again.
Common problems
Too many wrong attempts
After a few wrong entries the radio stops accepting codes for a while - cutting power only restarts the clock. 30-minute WAIT countdown after three wrong codes. Power must remain on the radio.
The serial is hiding from you
Nothing on the car's menus shows it - the number lives on the radio's own label. Top of the chassis label. Three 7mm bolts release the radio behind the trim bezel.
It is asking for the code a second time
By design, every loss of power re-arms the anti-theft lock. Battery disconnect or replacement.
Same face, different radio
One glance at the label settles it - worth doing before the order. RE3 is non-nav. If maps draw on NAV, you have an RB-series unit instead. RE3 and RE2 differ mainly by firmware revision and processor speed - the part number sticker is the cleanest way to tell them apart.
The code belongs to the radio and never changes, so keep it somewhere safe once you have it.
What Owners Usually Ask
From People Who Unlocked Their Radio
Left by customers after their radio came back to life. See the reviews page for all of them.
"Worked great! I ordered the code at 8pm est and received the code at 2am est put the code it this morning and radio is working great!"
I paid the $20 with hesitation but this worked perfect, got my code immediately. Thanks!!!
Kevin Kennedy - Chrysler
Paid the money I got the code before I could make it out the house thank you so much 👋🏾
Yolonda Bridgeman - Chrysler
What Is Included
The original code on screen seconds after you pay, emailed to you as well.
Full money-back guarantee if the code does not unlock your radio.
Order at any hour - no dealership, no appointment, no towing.
One code, forever: the same digits unlock the unit after every power cut.
You May Also Have
These units are easily confused with the Chrysler Uconnect 8.4 RE3. If the details above do not match your radio, open one of these instead.