How to Find the S/N on a Multipla's Radio
The only thing you'll need to get the code is your radio's unit serial. No VIN is needed.
On most Fiat models, you can find it in one of these places:
- Visible on the radio screen (in some cases by using a key combination)
- On the radio housing itself - you'll need to extract it and write down the serial number (which is usually simple)
Search for a label such as: Serial Number or SN.
1. Find the S/N on Fiat Multipla's Screen
On models with Continental VP1/VP2 radios, hold 1 + 6 while powering on to display the serial. All Blaupunkt and Bosch units require physical removal.
2. Finding the Serial Number on the Radio Sticker
To find the serial number, you'll need to pull out the radio unit from the dashboard.
- Start by turning off the ignition and removing the trim panel.
- Next, unscrew the mounting bolts and pull the unit forward to check the sticker on the back of the radio. Pay attention not to damage the cables.
- Write down the serial number precisely and then come back to our website.
- Know that serial number and part number are not the same. You will find both of them on the unit, and you only care for the serial.
Fiat Radio Removal Guide
To remove the Fiat Multipla radio, you typically need to pop off the dash bezel and unscrew the mounting hardware. The serial label is on the back or side of the unit. Be careful with the plastic trim clips.
Example: Fiat Multipla serial number label location
Common Serial Letters and Numbers on Fiat Multipla Radios
To unlock your radio, identify the unit type: VP263 = Continental, BP6694 = Blaupunkt, CM#### = Bosch. The serial is on a sticker on the radio itself.
Fiat Multipla's Usual Radio Code Triggers
Many drivers encounter security code prompts on their Multipla after battery-related issues.
Below are the most typical situations when this can occur.
Lock After a Battery Change
After a battery change, your radio may lock.
This happens because the radio loses power, which triggers the anti-theft system.
Other Situations That Trigger a Security Code
- Jump-starting the vehicle can reset the radio, requiring the unlock code.
- A fuse removal can cause the Fiat Multipla radio to lock.
- After an ECU or software reset, the radio may enter security mode.
- Installing a replacement head unit will require the original radio code.
Places to Check Before Paying for a Radio Code
Before you pay for it, you should check a few places where the code is often already written down.
Some owners find their Fiat Multipla radio code without needing any tools or paperwork.
Here are the easiest things to check first.
Look Through Car Documentation
- On the head unit itself, if it was removed before.
- In your service book from the previous owner.
- In the vehicle handbook, often on a code card.
- Inside the center console, sometimes on a label.
- In the boot compartment, on a service sticker.
Can You Get a Fiat Multipla Radio Code from the Dealership?
A Fiat dealer can usually look up the security code using your Multipla's VIN.
In most cases, you need to contact the service department or visit the dealership and show vehicle documents.
Once verified, they can request the original unlock code for your radio.
Possible Drawbacks:
- You usually need to visit in person and bring ID.
- Some older Fiat Multipla radios may require manual lookup.
- The process can take hours depending on the model and database.
- Dealers often ask for payment for the lookup service and it can cost more than 100$.
How to Enter the Radio Code on Fiat Multipla
You need to type in the anti-theft code into the system to unlock your Fiat's radio.
In the locked unit, the screen usually shows a security message.
You should use control knob, touchscreen, or radio presets to enter the numbers, then submit the code to restore radio functionality.
Be careful, because too many wrong attempts can disable your radio temporarily.
It will allow you a few incorrect tries before showing a LOCKED message.
You can reset the lockout by keeping the ignition on for an hour or a set waiting period.
Frequently Asked Questions about Fiat Multipla Radio Code
Free radio codes are rarely available.
Some dealers may help, but most codes require a dealer lookup.
The only no-cost option would be to search your car and its glovebox to see if you have it written down.
Yes. Each factory stereo has its own unique code.
If you install a different radio, you'll need the code for that individual radio.
Many OEM stereos use a anti-theft code, but some versions require one.
Whether a code is needed varies by the factory stereo and the production year.