How to Get 2017 Chrysler Voyager Radio Code [Fast]

Radio showing SAFE? Your Chrysler Voyager 2017 can be unlocked quickly using the radio unit's serial number. Enter it in the form and use the steps below if you need guidance.

No VIN required - just enter the serial number of the radio.
It takes less than a minute.

We offer a full refund if the code doesn't work.
Verification is quick and easy.
See our Refund Policy for full details.

Most Voyager codes are delivered instantly.
Rare Chrysler cases may take up to 24 hours.

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

T0MYD164822563 (T0MYD)
T00BE351823197 (T00BE)
TM9341100221 (TM9)
Dealer price $120 92% Off!
Our price: only $19.99
Secure Payment
Get Code Instantly
268+ Reviews
See reviews →
Guaranteed refund if the code is invalid
Chrysler Voyager 2017 car photo
How to find Chrysler Voyager 2017 radio serial number

How the Code Retrieval Process Works for Chrysler Voyager 2017

Vehicle radios use anti-theft codes tied to the radio unit itself instead of the model or production year.

  • Our lookup service works by matching your Chrysler Voyager radio's serial number.
  • After entering the serial into the form above, the system identifies the radio family and generates the code that you need.
  • Simply input the digits into the Voyager stereo.
  • Compared to Chrysler dealer retrieval, this method is faster and more convenient.

Code Entry Instructions

After receiving 2017 Chrysler Voyager radio code from the serial, you're ready to reactivate the radio.

Some drivers get stuck at this stage because input methods can look different across radio versions, but it's usually simple.

When the radio shows dashed lines, it means the unit is waiting for the correct numbers.

Detailed Input Instructions for Voyager 2017

To enter the code on the 2017 Chrysler Voyager Uconnect 8.4":

  1. Turn ignition to ON. Screen displays "ENTER CODE".
  2. Tap each digit of your 4-digit code on the on-screen keypad.
  3. Radio auto-confirms after the 4th digit. No confirm button needed.

3 wrong entries cause a 60-minute lockout. Keep ignition ON. Switching off restarts the timer.

Entering Process

Once the unlock code has been retrieved for a 2017 Voyager radio, it can be entered straight at the head unit - no scan tool or dealer visit is required.

  1. Limited attempts: Mopar head units only accept a small number of incorrect tries (commonly three) before going into a long lockout/WAIT state, so confirm each digit before pressing it.
  2. Place the ignition in RUN/ACC so the radio powers up but the engine stays off.
  3. Wait for the display to show CODE, Enter Anti-Theft Code, or a similar prompt.
  4. On the RBZ/RHB MyGIG (6.5-inch) units, type the digits using the on-screen number pad; on the base RES head unit, press the numbered preset buttons (1-6) in sequence.
  5. Confirm the entry with the on-screen OK/Enter button on the MyGIG units, or with the tune/menu knob (or labelled enter button) on the RES.
  6. If WAIT or a similar timeout appears after the failed-attempt limit is reached, leave the radio powered with the ignition in RUN for a continuous 30 minutes before trying the correct code again.

Radio Serial Number Explained - Finding It on Your Chrysler

The initial step is to find and write down the radio's S/N.

Based on the head unit type fitted in your 2017 Voyager, the S/N can be accessed either through the display menu or by checking the label on the radio itself.

Below are the most common methods to identify your S/N the right way.

Which Head Unit Is in Your 2017 Voyager?

By 2017 the Lancia Voyager had been retired in continental Europe, but the Chrysler Voyager nameplate continued in Canada and other markets on the same RT minivan platform - identical to the North American Town & Country / Dodge Grand Caravan. The radio lineup carried over unchanged from previous years. Identify yours by these traits:

  1. RES - Media Center 130 (base AM/FM/CD). Non-touchscreen. Small single-line monochrome display, hard preset buttons across the bottom and large rotary knobs for tune and volume. No NAV button, no Bluetooth, no SiriusXM from the factory on most builds.
  2. RBZ - 430 MyGIG (6.5" touchscreen, no nav). Glossy black bezel, 6.5-inch Mitsubishi-built color touchscreen, hard buttons for Radio, Media, Controls and More on the bezel. No NAV soft key on the home page because it has no navigation hardware.
  3. RHB - 430N MyGIG (6.5" with Garmin nav). Externally identical to RBZ - same screen, same bezel, same buttons. The differentiator is on-screen: a NAV soft key on the home menu, a Garmin splash logo at startup and a 28GB internal hard drive for stored music.
  4. Optional rear-seat DVD entertainment. 9-inch overhead flip-down screen, separate DVD player in the lower dash, wireless IR headphones; standalone module independent of the head unit.

Screen-Based Serial Lookup Method

These are the steps you need to follow for 2017 Chrysler Voyager:

The 2017 Chrysler Voyager — Chrysler's value minivan — comes equipped with the Uconnect 8.4" Classic (RA3). Even on the base Voyager, the RA3 Dealer Mode is supported.

Press and hold Climate Up, Climate Down, and Front Defrost simultaneously for 5 seconds with ignition in ACC or ON. Dealer Mode opens. Go to: System Info → Radio Part Info → Serial Number.

Manufacturer Label Inspection

If the serial number cannot be accessed via display, use the pull-out method.

Most Chrysler Voyager original radios include a tag with the serial number printed on the casing.

The process:

  • Shut down the car.
  • Carefully remove surrounding panel pieces.
  • Release clips holding the radio.
  • Slide outward to inspect the label.

If Dealer Mode is unavailable on the 2017 Chrysler Voyager, remove the RA3 from the minivan center console.

  1. Remove the bezel panel with a plastic trim tool.
  2. Remove the four Torx T20 mounting screws.
  3. Pull the unit out to access the serial label on the top or side of the radio chassis.

Pulling Out the Radio Unit to See the S/N on the Tag

The factory head units offered on the 2017 Voyager - typically the RES single-CD radio, the RBZ MyGIG 430 (6.5-inch touchscreen), the RHB MyGIG 430N (6.5-inch touchscreen with navigation), and the optional REZ rear-seat DVD entertainment module - all keep their serial on a printed chassis label. These legacy radios do not expose the serial through the screen, so the head unit has to come out for the sticker to be read.

  1. Safety first: switch the ignition off, remove the key, disconnect the negative battery terminal, and wait several minutes; never disturb the yellow airbag/SRS connectors and use plastic trim tools to keep clips and metal contacts intact.
  2. Tools you will need: plastic trim removal kit, Phillips screwdriver, small Torx bit set, flashlight, and a 7 mm socket on hand for any deeper retaining bolts.
  3. Ease the centre dash bezel forward at the lower edge using a plastic pry tool and work up the sides; on the RT minivan dash the bezel is held in by four friction clips with no visible screws.
  4. With the four clips released, lay the bezel on a soft cloth - on this body it does not need to be unplugged from any harness to free the radio.
  5. Remove the four screws securing the radio chassis to the dash bracket.
  6. Slide the radio forward and disconnect the antenna lead and the multi-pin power/data harnesses at the rear.
  7. The serial number is printed on a barcode/sticker label on the top or side of the chassis, alongside the part number and Mopar/supplier markings; the REZ rear-seat DVD module wears the same kind of printed label on its own case.
  8. Photograph the label up close and double-check ambiguous characters such as 0/O and 1/I before submitting the serial.
Chrysler Voyager 2017 radio serial number label location

Example: Chrysler Voyager serial number label location

Typical Serial Number Examples for 2017 Voyager

Year Chrysler Voyager RA3 serial formats:

  • T00AM – Harman VP2 RA3 (most common on Voyager)
  • T00BE – Continental version
  • TM9 – Earlier Harman production

Serial is 14 alphanumeric characters. Ignore the part number (starts with P05064 or 68).

S/N Patterns and Prefixes

The factory radios fitted to the 2017 Voyager are legacy Mopar head units rather than the later Uconnect 8.4 platform, so the prefix on the chassis label depends on which radio was specified and which supplier built it.

RBZ MyGIG 430 and RHB MyGIG 430N

  1. These Mitsubishi-built MyGIG units typically print an alphanumeric serial on the case sticker.
  2. Common Mopar/MyGIG prefixes seen on this generation include TM9 alongside other T-style codes.
  3. The serial is usually a continuous run of letters and digits with no dashes or spaces.

RES (single-CD)

  1. The base RES head unit usually carries a Mopar-style serial on a chassis sticker.
  2. Treat the printed label on the unit itself as the authoritative reference and copy each character exactly.

REZ rear-seat DVD module

  1. The optional REZ overhead DVD entertainment unit also wears a printed chassis label with its own serial.
  2. If codes are needed for that module, transcribe its serial separately and avoid guessing unclear characters.

Troubleshooting Common Radio Problems - Voyager 2017

The radio label: serial = 14 alphanumeric chars, starts with T00AM, T00BE, or TM9. Part number starts with P05064 or 68 — not the serial.

3 wrong entries lock the Voyager RA3 for 60 minutes. Keep ignition in ON or ACC. Turning off restarts the timer.

The Voyager Uconnect RA3 uses touchscreen-only code entry. Tap each digit on the on-screen keypad. Confirms after the 4th digit. No physical buttons needed.

The Voyager RA3 label shows both serial and part number. Serial: 14 chars, starts with T00AM, T00BE, or TM9. Part number (skip): starts with P05064 or 68.

Re-check each character. Contact support for a free re-check if needed.

If no code prompt appears, the lock hasn't activated. Force the prompt by briefly disconnecting the battery, then reconnect and turn ignition to ON.

What Caused the Radio to Lock?

The 2017 Chrysler Voyager radio locks automatically whenever power is cut. Even the value-tier Voyager uses the same anti-theft system.

Typical trigger: battery replacement or disconnect. Other causes:

  • Failed radio fuse
  • Buying the Voyager second-hand without a code
  • Battery disconnect for repairs
  • Battery dead from long storage

Code is derived from the radio serial number — not the VIN.

Get Your Chrysler Voyager 2017 Radio Code Now