Generate Dodge Journey 2014 Radio Code : Instant Unlock⚡

Radio showing LOCKED? Your Dodge Journey 2014 can be unlocked quickly using the radio unit's serial. Enter it in the form and use the steps below if you need guidance.

Delivery is instant in most Dodge Journeys.
Rare Dodge cases may take up to 24 hours.

We offer a full refund if the code doesn't work.
Video proof may be required.
Review our Refund Policy for complete terms.

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

T00BE351823197 (T00BE)
TM9341100221 (TM9)
T0MYD164822563 (T0MYD)
Dealer price $120 92% Off!
Our price: only $19.99
Secure Payment
Get Code Instantly
260+ Reviews
See reviews →
Full refund if your code fails
Dodge Journey 2014 car photo
How to find Dodge Journey 2014 radio serial number

How to Get Your 2014 Dodge Journey Radio Code

  • Rather than relying on Dodge dealership lookup or online threads you can find the code online with the radio serial number.
  • Identify your radio's serial. The best place to search is on the unit itself, and in some cases it can be visible on the Journey's display.
  • Enter it into the form above, and our software will calculate the correct 2014 Journey unlock code.
  • After getting it, input it using Journey's radio controls to release the blockade fully.
  • The entire process takes only a few minutes and requires no VIN, documents, or technical knowledge.

Entering the Radio Security Code

Once you receive the correct unlock code based on the serial number, you can restore default functionality by entering it into the unit.

The code entry process depends on the radio interface, but most 2014 Journey systems follow a similar structure using preset buttons, touch controls, or rotary knobs - depending on if it's a factory or an aftermarket unit.

You will typically see CODE displayed on screen.

Step-by-Step - The Correct Way to Enter It

Entering the code on the 2014 Journey's Uconnect 8.4":

  1. Ignition ON. Screen displays "ENTER CODE" or ----.
  2. Use the touchscreen on the Journey's 8.4" screen to enter your 4-digit code.
  3. The radio restores after the 4th digit — no confirm required.

Lockout: 3 wrong attempts = 60-minute lockout. Keep ignition ON throughout. Cycling the ignition restarts the wait.

Step-by-Step Code Input Guide

Once the unlock code has been retrieved for a 2014 Journey radio, it can be entered straight at the head unit - no scan tool or dealer visit is required.

  1. Limited attempts: after three successive incorrect codes the radio drops into a WAIT lockout state, so verify each digit before pressing it.
  2. Place the ignition in RUN/ACC so the radio powers up while the engine stays off.
  3. Wait for the display to show CODE, Please Enter Anti-Theft Code, or a similar prompt.
  4. On the Uconnect 8.4 (RE2) and 8.4N (RB5) units, key the four digits using the on-screen number pad and confirm with the on-screen OK/Enter button.
  5. On the base Radio 4.3 / Uconnect 4.3 unit, press the numbered preset buttons (1-6) in sequence to enter each digit and confirm with the tune/menu knob or labelled enter button as prompted on the display.
  6. If WAIT appears after three failed attempts, leave the radio powered with the ignition in RUN for a continuous 30 minutes (the vehicle may be driven during this time) before trying the correct code again.

Where to Find the Serial Number on your Journey

Very useful thing to know is that factory radios use a specific S/N to identify each unit.

Your security system links the code directly to this serial.

Unlike car-specific data like VIN or registration info, it is not determined by the model or production year, so you'll be able to retrieve it even if you have a radio that you installed afterwards.

Depending on the maker and radio installed in your Dodge Journey, the retrieval method varies.

Here are the best ways to locate it.

Factory Radios on the 2014 Dodge Journey

For 2014 the Journey carried over the Uconnect 3 (3C) generation infotainment lineup with three head-unit choices, all sharing the same one-piece centre stack bezel.

  1. Radio 4.3 (Uconnect 4.3) - the entry head unit on SE/AVP/American Value Package: 4.3-inch colour display, AM/FM/CD, hard buttons across the bezel, optional Voice Command and hands-free calling. The most common fit on lower trims; no native touch on the base 4.3, while the upgraded Uconnect Touch 4.3S adds a touchscreen layer plus SiriusXM and was offered on SXT.
  2. Uconnect 8.4 (sales code RE2) - 8.4-inch colour touchscreen without navigation. Continental-built unit, glossy bezel with no surrounding hard keys (controls are on-screen plus the climate panel below). Optional on SXT and standard or available on Crossroad and Limited; identifiable by the large screen and the absence of a NAV soft key on the home menu.
  3. Uconnect 8.4N with Garmin navigation (sales code RB5) - same 8.4-inch screen and bezel as the RE2 but with Garmin-based navigation enabled, HD Radio, and SiriusXM Travel Link. Distinguished on-screen by the NAV soft key on the home menu and the Garmin logo on boot. The top-tier touchscreen and the rarer of the two 8.4 units.

Access the Serial via the Radio Display

These are the steps you should follow for 2014 Dodge Journey:

The 2014 Dodge Journey serves as a practical family vehicle and features the Uconnect 8.4" (RA3) infotainment system. Retrieving the serial number is done via Dealer Mode.

Climate Button Method:

  1. Turn the ignition to ACC or ON.
  2. On the Journey's center stack, find the Climate Up, Climate Down, and Front Defrost buttons positioned beneath the display. Hold all three simultaneously for 5 seconds.
  3. Dealer Mode loads on the screen.
  4. Navigate to: System Info → Radio Part Info → Serial Number.

Backup Method: Hold Temperature Up (red) and Temperature Down (blue) for 5 seconds to enter Engineering Mode, then follow the same path.

Find Your Serial Number on the Radio Display

If your 2014 Journey is fitted with the Uconnect 8.4 (RE2) or 8.4N (RB5) head unit, the radio's serial number can usually be read from the screen via the FCA factory dealer/diagnostic mode without removing anything from the dash. The base Radio 4.3 / Uconnect 4.3 does not expose this information on screen, so for that head unit skip ahead to the removal method.

  1. Place the ignition in RUN/ACC so the radio powers up but the engine stays off.
  2. Wait for the Uconnect home screen to finish loading.
  3. On the climate control panel below the screen, press and hold the driver-side temperature UP, the driver-side temperature DOWN, and the front DEFROST button at the same time for roughly 7 seconds.
  4. The screen switches to a diagnostic/dealer menu listing radio information, software revisions and serial numbers.
  5. Locate the radio serial number entry on that screen and write it down exactly as printed, double-checking ambiguous characters such as 0/O and 1/I.
  6. Exit by switching the ignition off; the screen will return to its normal state on the next start.

If the three-button combination does not bring up the dealer menu, your radio is likely the base 4.3 unit, which means the serial has to be read from the printed label on the radio chassis instead.

Check the Serial by Pulling Out the Radio

If the serial number cannot be accessed via display, use the removal method.

Most Dodge Journey original radios include a sticker with the serial number printed on the chassis.

Step-by-Step:

  1. Switch off the vehicle.
  2. Detach the trim surrounding the radio.
  3. Unscrew the mounting bolts.
  4. Pull the unit slightly out to access the label.

The serial number is usually located near the barcode.

If Dealer Mode is unresponsive on your 2014 Journey, the radio can be physically removed to see the serial label. The Journey's compact center stack is straightforward to work on:

  1. Remove the center trim bezel – The Journey's trim bezel covers the radio and climate section. Insert a plastic pry tool at the bottom corners and gently pry along the perimeter to release the friction clips.
  2. Remove the 4 mounting screws – Typically Torx T20 screws at the radio frame corners.
  3. Pull the radio forward – Slide the unit out far enough to read the serial label on the top or side.

The serial is a 14-character barcode label. The harness can remain connected.

View Serial by Pulling Out the Radio Unit

If your 2014 Journey has the base Radio 4.3 / Uconnect 4.3, or if the dealer-mode shortcut on the 8.4 unit does not bring up the diagnostic screen, the head unit needs to come out so the printed serial label on the chassis can be read.

  1. Safety first: turn the ignition off, remove the key, disconnect the negative battery terminal, and wait several minutes before touching wiring; never disturb the yellow airbag/SRS connectors and use plastic trim tools so nothing shorts or breaks.
  2. Tools you will need: plastic trim removal kit, Phillips screwdriver, small Torx bit set, flashlight, and a 7 mm socket on hand for any deeper retaining bolts.
  3. Start at the lower edge of the centre dash bezel and ease it forward with a plastic pry tool, working up the sides. The bezel is held in by spring/friction clips and pops free with steady pressure - no visible screws on the face of the bezel.
  4. Once the clips release, tilt the bezel out and unplug the small connector for the hazard switch and any HVAC/auxiliary plugs on the back of the panel before lifting it clear.
  5. Set the bezel aside on a soft cloth so the gloss finish does not get scratched.
  6. Remove the screws (typically four) securing the radio chassis to the dash bracket.
  7. Slide the radio forward and disconnect the antenna lead and the multi-pin power/data harnesses on the rear of the unit.
  8. The serial number is printed on a barcode/sticker label on the top or side of the radio chassis, alongside the part number and Mopar/supplier markings.
  9. Photograph the label up close in good light and double-check ambiguous characters such as 0/O and 1/I before submitting the serial.
Dodge Journey 2014 radio serial number label location

Example: Dodge Journey serial number label location

Common S/N Formats Used on 2014 Journey Units

The 2014 Dodge Journey with the 8.4" Uconnect (RA3) features these serial formats:

  • T00AM – Harman VP2 Uconnect (standard format)
  • T00BE – Continental build
  • TM9 – Earlier Harman production

Radio designation: RA3. Serial length: 14 characters. Note: The Journey ran the older RA3 platform through 2020 — even the final production years.

Reminder The Journey's label includes a part number (P05064... or 68...) — only the serial is used for code generation.

Typical Serial Number Formats for 2014 Journey Radios

The prefix on the chassis label varies with which head unit was specified and which supplier built it.

Uconnect 8.4 (RE2) and 8.4N (RB5)

  1. These Continental-built units typically print an alphanumeric serial on the case sticker.
  2. Common Mopar Uconnect 8.4 prefixes from this generation begin with the letter T followed by additional letters and digits, with the serial running as a continuous block of characters with no dashes or spaces.
  3. Treat the printed label on the unit itself as the authoritative reference and copy each character exactly.

Radio 4.3 / Uconnect 4.3 (Touch 4.3S)

  1. The base 4.3 head unit usually carries a Mopar-style serial on a chassis sticker.
  2. Avoid guessing characters that are unclear and copy what is printed on the label rather than relying on any assumed prefix.

Troubleshooting Common Radio Problems - Journey 2014

On the 2014 Journey, the RA3 radio label contains the serial and the part number:

  • Serial number — 14 characters, beginning with T00AM, T00BE, or TM9. Use this.
  • Part number — starts with P05064 or 68. Ignore this.

For this model, Dealer Mode is easiest way: System Info → Radio Part Info → Serial Number. No tools required.

If the Journey's radio doesn't ask for a code after a battery event:

  • Ensure ignition is in ON (not ACC) and give it a moment for the system to boot.
  • Inspect the radio fuse — fuse failure will stop the display from activating.
  • On some Journey units may require a screen tap to wake the display.

Should nothing appear, power issue is the most common cause.

After three incorrect codes on the Journey's Uconnect, a 60-minute lockout takes effect. The screen shows "WAIT":

  1. Leave the Journey's ignition ON — the car doesn't need to run but key stays in ON.
  2. Allow the full 60 minutes to pass.
  3. Turning the ignition off restarts the 60-minute timer.

Once clear, try again with the verified code.

A rejected code on the Journey's Uconnect 8.4" nearly always means a serial mismatch. The RA3 label displays both a serial number (14-char code, starts with T00AM, T00BE, or TM9) and a part number (P... or 68...) on the same sticker.

Re-read the serial via Dealer Mode or the physical label and contact support for a free re-check if needed.

The Journey's Uconnect 8.4" uses touchscreen-only input for code entry — no physical buttons are used. When the code screen appears:

  • Press each number directly on the on-screen pad.
  • The radio auto-unlocks after the final number — no "OK" button is needed.

If the touchscreen doesn't respond, cycle the ignition and wait 30 seconds.

Why Did the Radio Lock and Ask for a Code?

Owners of this family crossover face radio lockouts typically due to:

  • Battery replacement — as a popular daily family vehicle means batteries wear out with heavy use, and every disconnect triggers the lock.
  • Dead battery from short trips — family crossovers used mainly for short errands can develop weak batteries, eventually causing a dead battery and locking the radio.
  • Blown fuse — fuse replacement also interrupts power and locks the radio.
  • Used purchase — buying second-hand without the prior code means the code is needed immediately.

The unlock code is permanently tied to the serial number and remains valid.

Get Your Dodge Journey 2014 Radio Code Now