Uconnect Radio Code for Ram
Locked after a power loss? Get your Uconnect radio code without the wait.
Uconnect Radio Models Supported:
For Ram Vehicles
Quick Answers
No. In most cases, the serial number is all that's needed to retrieve your Uconnect radio code. The VIN alone cannot pinpoint which radio you have, which is why we ask for the serial instead.
If the radio code doesn't work, first make sure that the serial number was entered correctly and that the code was typed into the radio exactly as provided. If everything is correct and the issue remains, contact our support team. We'll review your order and find the correct solution. Our money-back guarantee applies if we're unable to provide the correct code.
Yes. Once you receive the correct unlock code, simply enter it using your radio controls. There's usually no need for special tools or professional assistance.
We cover a wide range of Uconnect radios installed in Ram vehicles. Compatibility depends on the radio model rather than the vehicle alone. If you're unsure, match your unit to the models listed here or contact our support team.
To retrieve your Uconnect unlock code, you only need your serial number. The VIN is usually not required. You can find the serial number using the methods explained in our guide.
Compatible Ram Vehicles with Uconnect Radios
Not every Ram vehicle uses the same radio manufacturer. Original audio systems differ based on the vehicle specification, your car may be fitted with a Uconnect stereo.
If your vehicle still has its OEM radio, there's a good chance it is one of the compatible models listed below.
| Model | Years | Factory Radio |
|---|---|---|
| Ram 1500 (DS) | 2013-2018 | Uconnect 8.4 (RA3/RA4) |
| Ram 1500 (DT) | 2019-2023 | Uconnect 8.4 (VP2) |
| Ram 1500 (DT) | 2019-2024 | Uconnect 12.0 (RC4) |
| Ram 1500 (DT) | 2024-2025 | Uconnect 5 (VP2.5) |
| Ram 1500 Classic (DS) | 2019-2024 | Uconnect 3/5.0 (VP2) |
| Ram 2500/3500 | 2013-2018 | Uconnect 8.4 (RA) |
| Ram 2500/3500 | 2019-2025 | Uconnect 12.0 |
Uconnect Radio Code Lookup for Ram
Uconnect is the factory infotainment platform in Ram trucks, spanning generations from the RBZ and RHB head units through the MyGIG systems to the large Uconnect 4C touchscreens. Each Ram Uconnect radio carries a serial number on its housing label, and the anti-theft code is derived from that radio serial number. For this reason the Ram code is retrieved from the radio serial and never from the vehicle VIN.
After a disconnect, a dead battery or electrical repairs, a Ram Uconnect radio can restart displaying ENTER CODE, LOCKED or asking for a security code. This is the factory anti-theft system securing the unit, and it is easily resolved. Enter your Ram Uconnect radio serial number to get the correct code online instead of visiting a dealer.
If your Uconnect radio in a Ram is displaying CODE, don't worry. This usually happens after servicing the vehicle.
Our radio unlock service allows you to retrieve the correct security code using only your device serial number.
Forget about scheduling a dealership appointment. In most cases, your unlock code can be retrieved within just a few minutes, allowing you to get back to listening to your music quickly.
Why Your Uconnect Radio May Be Locked
Your Uconnect radio uses an anti-theft feature that protects it from unauthorized use. Whenever the system detects a loss of power, it may request the security code before allowing normal operation.
Below are the typical situations that can trigger this protection.
Replacing the Vehicle Battery
Removing the Factory Radio
Vehicle Electrical Work
Low Battery Voltage
What Makes Find Radio Code Different?
Choosing the right way to restore your car stereo is important when your Uconnect system becomes locked.
Our service is designed to make the process easy without technical knowledge. You only need your device serial number, and the system handles the rest.
Unlike traditional dealership methods that can take a long time, our radio code lookup service provides results in a much shorter time frame, helping you reactivate your infotainment system without unnecessary delays.
Get Your Code Within Minutes
Avoid Expensive Dealer Fees
Simple Serial Number Lookup
Safe Online Radio Code Service
Real Customer Experiences
Genuine feedback from car owners whose radio codes were retrieved through findradiocode.
2014 RAM 3500. Purchased used 8.4 head unit from ebay. Installed, works but radio locked. Wish I would have known this existed. Spent 2 hours chatting with Mopar, called dealer for help, called again. They want you t...
Jeff - Ram
Was swapping 2018 radio into 2013. Had no code with the radio. After putting in the serial # I had code instantly!. Highly recommend it!
Adam - Ram
Very good service
alex - Ram
Help & FAQs
For most Uconnect radios, the VIN number alone is not required. The correct radio code is normally generated using the serial number, which uniquely identifies the radio.
The radio code remains the same for the radio throughout its lifetime. Should it lose power again later, you simply enter that same code.
In some cases, the radio code may already be available in your vehicle documentation if it was recorded by the previous owner or supplied with the vehicle.
If the code is not available, it usually needs to be generated using the radio serial number, which typically requires a professional lookup service.
The radio serial number may be located on the top or side of the unit, depending on the model.
If it cannot be displayed electronically, you may need to remove the radio to access the identification label.
Once the correct radio code has been entered successfully, it is normally stored in the radio's memory.
The code will only be requested again if the radio loses power.
Most factory radios temporarily lock after several incorrect attempts. Some makers require the radio to stay powered for a waiting period before the next attempt.