Find Chrysler Grand Caravan 2012 Radio Code : Fast&Easy⚡

Need the radio code for your Chrysler Grand Caravan 2012? The unlock process is based on the radio's S/N, and it's the same for all Chryslers. But if you want full instructions for your exact 2012 Grand Caravan, follow our guide.

Delivery is instant in most Chrysler Grand Caravans.
Some Chrysler cases require manual processing (24h).

No VIN required - just enter the serial number of the radio.
No documents required.

We offer a full refund if the code doesn't work.
A proof that the code failed may be required.
Check the Refund Policy page for more information.

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

T0MYD164822563 (T0MYD)
T00BE351823197 (T00BE)
TM9341100221 (TM9)
Dealer price $120 92% Off!
Our price: only $19.99
Secure Payment
Get Code Instantly
263+ Reviews
See reviews →
Guaranteed refund if the code is invalid
Chrysler Grand Caravan 2012 car photo
How to find Chrysler Grand Caravan 2012 radio serial number

Why Did the Radio Lock and Ask for a Code?

The 2012 Chrysler Grand Caravan 4.3" Uconnect self-locks after battery is disconnected. High ownership volume means battery replacement and dealer servicing are frequent triggers.

Causes: battery replacement, blown fuse, buying used without a code, battery dead from sitting.

Code is derived from the radio serial number — not the VIN.

Steps to Unlock Your 2012 Chrysler Grand Caravan Radio

To get the code, you'll take only a few easy steps.

  1. Locate your radio's serial - this is the only information required to generate the correct unlock code.
    The difference with the dealership lookup is that no VIN or paperwork is needed.
  2. Enter the serial number into our generator above.
    The system checks it against a database of supported units and automatically finds the matching anti-theft code.
  3. In most cases, the code appears instantly on the screen after you pay and is also sent to your email , just in case.
    If manual verification is required (rare situations), you'll be notified before checkout.
  4. Once you receive it, just enter it into the radio to restore the functionality.

Radio Code Input Guide

After generating the correct unlock code based on the S/N, you can restore normal functionality by entering it into the unit.

The code entry process depends on the head unit design, but most 2012 Grand Caravan systems follow a similar structure using preset buttons, touch controls, or rotary knobs - depending on if it's a factory or an aftermarket unit.

You will typically see ENTER CODE displayed on screen.

In-depth Entering Instructions for Grand Caravan 2012

To enter the code on the 2012 Chrysler Grand Caravan Uconnect 4.3":

  1. Turn ignition to ON. Screen displays "ENTER CODE".
  2. Enter each digit of your 4-digit code on the touchscreen keypad.
  3. Radio auto-confirms after the 4th digit. No confirm button needed.

3 wrong attempts cause a 60-minute lockout. Keep ignition ON. Switching off restarts the timer.

Step-by-Step Code Input Guide

With the unlock code in hand, entering it on a 2012 Grand Caravan is straightforward. The exact buttons differ between the RES base radio and the RBZ/RHB MyGIG touchscreens, but the overall flow is the same.

  1. Limited attempt warning - read this first: Mopar radios of this era allow only three attempts before locking. After three consecutive invalid codes, the display changes to WAIT and the radio must remain powered with the ignition in RUN for a continuous 30 minutes before it will accept another code. The vehicle may be driven during that window. Verify each digit before confirming.
  2. Insert the key and turn the ignition to RUN or ACC; the engine does not have to be running, but the radio must be fully powered up.
  3. Switch the radio on. Within a few seconds the screen will show CODE or a similar prompt such as Please enter Anti-Theft Code.
  4. On the RES base radio, input the four digits using the numbered preset buttons across the faceplate, in the order shown on the display.
  5. On the RBZ / RHB MyGIG, tap the digits on the on-screen numeric keypad that appears with the CODE prompt.
  6. Confirm with OK (or the on-screen confirm button on MyGIG) once all four digits are visible.
  7. If WAIT appears, leave the key in RUN and allow the 30-minute timer to count down without turning the radio off; otherwise the timer resets.
  8. If a single attempt fails, double-check the serial supplied matches the label on the chassis (not the VIN) before trying again - there are still remaining attempts.
  9. After a successful entry the radio returns to its normal start-up screen and remembers the unlock until the next battery disconnect or unit removal.

Locate the Serial Number Needed to Generate Chrysler Grand Caravan 2012 Radio Code

The important fact to know is that factory radios use a unique serial number to identify each unit.

Your security system links the code directly to the serial.

Different from car-specific data such as VIN or registration information, it is not determined by the model or production year, so you'll be able to retrieve it even if you have an aftermarket radio.

Depending on the maker and radio installed in your Chrysler Grand Caravan, the retrieval method varies.

These are the most reliable ways to find it.

Which Head Unit Is in Your 2012 Grand Caravan?

For 2012 the Grand Caravan carried over the same head unit menu used on the 2011 refresh. Depending on trim and option packages, the van will have one of the following:

  1. RES - Media Center 130 (base AM/FM/CD/MP3). The base 130S-style AM/FM/CD/MP3 radio with knobs and physical preset buttons. Often paired with optional Uconnect Bluetooth and SiriusXM.
  2. RBZ - Media Center 430 MyGIG (6.5" touchscreen, no nav). 6.5-inch touchscreen MyGIG with CD/DVD, USB input, hard-drive music storage and SiriusXM. The most common touchscreen radio in 2012 Crew and SXT Canadian-market vans.
  3. RHB - Media Center 430N MyGIG (6.5" with Garmin nav). Same MyGIG platform as the RBZ but adds Garmin-based on-board GPS navigation, traffic and points-of-interest data, plus a 28GB internal hard drive.
  4. REZ - rear-seat DVD entertainment (optional). Optional second-row video system; it lives in the headliner and works with whichever front radio your van has.

The sales code (RES, RBZ, RHB) is printed on the white label on the radio's metal chassis, so a quick pull of the head unit confirms exactly which version is fitted - useful before ordering an unlock code.

Find Your S/N via the Radio Screen

These are the steps you should follow for 2012 Chrysler Grand Caravan:

The 2012 Chrysler Grand Caravan with the Uconnect 4.3" (RA2) base infotainment does not support on-screen serial access. The Grand Caravan's no-frills center stack houses the 4.3" unit without Dealer Mode support.

The serial number is only accessible from the sticker on the radio chassis after pulling out the unit.

Locate Serial on Grand Caravan's Radio Chassis

If the serial number cannot be accessed via display, use the removal method.

Most Chrysler Grand Caravan factory radios include a tag with the serial number printed on the housing.

Basic process:

  • Ensure the ignition is off.
  • Lift away surrounding panel pieces.
  • Remove fasteners holding the radio.
  • Slide outward to inspect the label.

Remove the 4.3" Uconnect from the 2012 Chrysler Grand Caravan minivan's practical dashboard:

  1. Switch off the vehicle.
  2. Pry off the trim panel with a plastic trim tool. The Grand Caravan's no-nonsense dash panels are held by clips and come off without much resistance.
  3. Remove the four Phillips mounting screws.
  4. Pull the unit forward to access the serial label on the side or back of the chassis.

Locate Serial on Grand Caravan's Radio Chassis

The 2012 Grand Caravan does not display its radio serial number on screen, so the dependable way to read it is to pull the head unit out a few inches and look at the manufacturer label. Thanks to the simplified 2011-onwards dashboard, the job is essentially one bezel and four screws.

  1. Safety first: park on a flat surface, apply the parking brake and switch the ignition fully OFF. If extra caution is preferred, disconnect the negative battery terminal; on most 2012 Grand Caravans the radio can be removed key-off without doing so. Allow a minute or two before unplugging connectors to let internal capacitors drain.
  2. Tools you will need: a plastic panel/trim removal tool to unclip the centre bezel without cracking it, a #2 Phillips screwdriver to back out the four radio chassis screws, and a soft cloth or towel laid over the top of the dash to protect the trim.
  3. Beginning at one of the upper corners of the centre-stack bezel, work the panel tool behind the trim and pop the spring clips along the top edge, then down each side. There are no hidden fasteners on this generation - the bezel is held only by clips.
  4. Pull the bezel forward enough to unplug the hazard switch and any other connectors on its back side.
  5. Remove the four Phillips screws holding the radio chassis to the dash bracket (two upper, two lower).
  6. Slide the radio toward you, disconnect the antenna lead and the multi-pin harnesses, and lift the unit out.
  7. Where the serial number lives: on RBZ and RHB MyGIG radios the serial number is printed on the white/silver label on the chassis, beside the barcode. The same label shows the Mopar sales code (RES, RBZ or RHB) and the manufacturer part number, which is a useful cross-check. On the RES base CD unit, the equivalent label sits on the top or side of the metal case.
  8. Practical tips: take a clear photo of the entire label rather than transcribing by hand - it removes any guesswork on tricky characters. If the print is faded, wipe gently with a dry cloth and never use solvents on the label. On reinstall, seat the harnesses fully before sliding the radio home, then press the bezel back in around its full perimeter so every clip latches.
Chrysler Grand Caravan 2012 radio serial number label location

Example: Chrysler Grand Caravan serial number label location

S/N Patterns and Prefixes

Serial patterns for the 2012 Chrysler Grand Caravan 4.3" Uconnect:

  • TM9 – Common on early Harman RA2 Grand Caravan units
  • T00AM – Typical Harman RA1/RA2 format
  • T00BE – Continental version

Serial is 14 alphanumeric characters. Ignore the part number (starts with P or 68).

S/N Patterns and Prefixes

The serial number layout seen on a 2012 Grand Caravan radio depends on which factory head unit the van was built with. The notes below describe the patterns most commonly reported by owners; always copy the actual string from the chassis label rather than relying on a generic example.

RBZ - MyGIG 430 (no nav)

  1. RBZ serials are typically reported as starting with the letter T, followed by an alphanumeric block printed next to the barcode on the chassis label.
  2. Use the full string as printed - the leading T is part of the serial as far as the unlock algorithm is concerned.

RHB - MyGIG 430N (Garmin nav)

  1. The RHB uses the same MyGIG hardware family as the RBZ, so its serial pattern tends to look very similar.
  2. The serial used for unlocking lives on the chassis label, not inside any on-screen navigation menu.

RES - base CD/MP3

  1. The RES radio uses its own Mitsubishi/Mopar serial format. Patterns vary somewhat by production run.
  2. Copy the printed string exactly and let the format hints on the serial-entry page validate it for you.

What to double-check before submitting

  1. Confirm you are reading the radio's own serial from the chassis sticker - not the VIN, not a part number and not the Mopar sales code.
  2. Preserve any spaces or punctuation as printed; some labels include separators and some do not.
  3. When two stickers are present, the longer alphanumeric string next to the barcode is normally the one that matches our supported serial formats.

Understanding Unlock Issues with Your Grand Caravan

The radio label: serial = 14 chars starting with TM9, T00AM, or T00BE. Part number starts with P or 68 — not the serial.

If no code prompt appears, anti-theft is inactive. Trigger the prompt: briefly disconnect the battery, reconnect, turn ignition to ON.

3 wrong entries lock the Grand Caravan 4.3" for 60 minutes. Keep ignition in ON or ACC. Cutting power restarts the timer.

The Grand Caravan 4.3" uses touchscreen-only code entry. Tap each digit on the on-screen keypad. Auto-unlocks after the 4th digit. No physical buttons involved.

The Grand Caravan 4.3" label has both serial and part number. Serial: 14 chars starting with TM9, T00AM, or T00BE. Part number (skip): starts with P or 68.

Re-read the label carefully. Contact support for a free re-check if needed.

Get Your Chrysler Grand Caravan 2012 Radio Code Now