Panasonic Chrysler Uconnect 8.4 RE2 Security Code Online

Panasonic | Chrysler | Instant Retrieval

Dealer quote $120 Save 92%
Our fee: from $9.99?
Chrysler Uconnect 8.4 RE2 radio - get the 4-digit unlock code from the serial number
Secure Payment
Get Code Instantly
291+ Reviews
See reviews →

Seconds. The code is generated the instant the payment completes and is shown on screen as well as emailed - day or night, no waiting involved.

You are covered by our full refund guarantee. Send us a short video showing the serial number and the code being entered, and we refund the order in full.
See the refund policy.

RE2 has no maps. If tapping NAV draws a map, you have an RB4 or RB5, not an RE2. The RE2 home screen typically shows Radio, Media, Phone and More - no NAV tile.

White printed label on the top surface of the chassis, toward the rear. The unit must come out of the dash; there is no in-software display of the serial in lock mode. That number (it starts with T00AM, T00BE) is all the code generation needs.

Compatible Serial Number Formats

Serial Prefix Status
T00AM Supported
T00BE Supported

If your serial starts with any prefix above, we can recover your code.

Getting your Chrysler Uconnect 8.4 RE2 code

One number, three steps, a couple of minutes.

  1. 1 Read the number on the label On the factory sticker on the radio housing, beside the barcode. Most units have to come out of the dash - release keys cost a few dollars.
  2. 2 Put it in the form on the left Copy it character for character. We check the format before checkout, so a typo never costs you anything.
  3. 3 Unlock the radio The code is delivered instantly, day or night. Enter it on the radio and the anti-theft screen goes away.

If it does not work, you get your money back.

Serial number label on the Chrysler Uconnect 8.4 RE2 chassis, used to generate the unlock code

Same label, different radio: yours carries its own serial in this spot.

Is This Your Chrysler Uconnect 8.4 RE2?

Not sure if your vehicle is equipped with the Chrysler Uconnect 8.4 RE2? Check the design, controls, display and features listed below against your factory radio.

Typical identification features:

  • 8.4" touchscreen in the centre of the dash
  • A non-navigation unit: the menus never show a map
  • Sales code RE2 on the chassis label
  • Label serial opening with T00AM, T00BE

You most likely have the Chrysler Uconnect 8.4 RE2 if:

  • the factory label reads RE2
  • the label serial begins with T00AM, T00BE
  • the car left the factory between 2013-2015
  • the screen is the 8.4" touchscreen fitted to the Uconnect 8.4
Easy to mix up?

RE2 has no maps. If tapping NAV draws a map, you have an RB4 or RB5, not an RE2. The RE2 home screen typically shows Radio, Media, Phone and More - no NAV tile.

Introducing the Chrysler Uconnect 8.4 RE2

The Chrysler Uconnect 8.4 RE2 is an original factory-installed head unit developed for selected Chrysler vehicles. Designed to provide reliable audio playback and vehicle integration, this unit may also offer Bluetooth connectivity, touchscreen controls, CD/DVD playback, navigation or multimedia support, depending on the exact configuration.

Uconnect 8.4 RE2 is the early-spec Panasonic 8.4-inch non-navigation head unit (RE-series radios are the non-nav siblings of the RB-series). AM/FM, SiriusXM, Bluetooth and USB, but no built-in maps - tapping NAV returns "Feature not available".

The Chrysler Uconnect 8.4 RE2 was installed in various Chrysler models between 2013-2015. It was commonly fitted to vehicles built on the Panasonic multimedia platform and is still one of the more recognisable factory radios of that period.

Features you may find on the Chrysler Uconnect 8.4 RE2:

8.4" touchscreen

AM/FM radio

Bluetooth for hands-free calls and music streaming

USB input for music playback

SiriusXM satellite radio*

Steering wheel control support

Anti-theft security code

*Availability varies with the vehicle specification.

Like many factory-installed radios, the Chrysler Uconnect 8.4 RE2 is protected by an anti-theft system. If power is interrupted after replacing or disconnecting the vehicle battery, the unit may request the original radio code before it can be used again.

For the manufacturer's own documentation of this platform, see the official Uconnect site.

Locating the Chrysler Uconnect 8.4 RE2 Serial Number

The code is generated from the radio's own serial number, so that number is the only thing you need before ordering. It is printed on the factory sticker of the unit itself, not in the vehicle documents.

On the Chrysler Uconnect 8.4 RE2: White printed label on the top surface of the chassis, toward the rear. The unit must come out of the dash; there is no in-software display of the serial in lock mode.

Getting to the label:

  1. Slide the radio out of the dash - most units need a pair of release keys, which cost very little online.
  2. The serial is on the chassis label, usually right next to the barcode - copy it down.
  3. Type it into the form exactly as printed, without spaces.
What the serial looks like: T00AM and then 9 more characters; T00BE and then 9 more digits, e.g. T00BE123456789.
Serial number label on the Chrysler Uconnect 8.4 RE2 chassis, used to generate the unlock code

Serial number location on this unit

Watch the full process

Chrysler Uconnect 8.4 RE2 radio code by serial number - video thumbnail

From our YouTube channel - the same steps apply to this unit.

The Situations That Lock a Chrysler Uconnect 8.4 RE2

Almost all of the Chrysler Uconnect 8.4 RE2 codes we generate follow one of these four events.

A repair cut the power

Alternator, starter or fuse-box work usually means disconnecting the battery - and the radio arms its anti-theft as a side effect of the repair.

A replacement radio

A used unit from a donor car always arrives locked, and the code from your old radio will not fit - the code follows each radio's own serial number, so order it for the serial on the REPLACEMENT unit.

You bought the car used

No handbook, no code card, seller unreachable - none of it matters. The radio's own serial number carries everything needed to calculate the code.

New battery, locked radio

A new battery - or a flat one after the car sat for a while - cuts power to the radio, and the anti-theft system arms itself the moment power returns.

Whichever of these happened to you, the fix is identical: the serial number off the radio, the form at the top of this page, and the code arrives in seconds.

Hardware Specifications

Specification Value
Manufacturer Panasonic
Radio Family Uconnect 8.4
Variant RE2
Vehicle Brand Chrysler / Dodge / Jeep / Ram
Production Years 2013-2015
Display 8.4" touchscreen
Navigation No
Serial Prefixes T00AM, T00BE

Depending on the vehicle configuration, the Chrysler Uconnect 8.4 RE2 may include additional multimedia features such as Bluetooth hands-free calling, USB media playback or factory navigation. Equipment levels can vary between production years and trims.

Supported Part Numbers 89

These are the OEM references this page covers. If the number on your radio's label is in the list, we can recover your code.

Behind the 89 references sit 10 base part numbers; suffix letters like AA or ZD separate factory revisions of the same hardware, all of them supported here.

P04692349AA P04692349AC P04692349AD P04692349AE P04692349AF P04692349AG P04692349AH P04692349AI P04692349AJ P04692349ZD P04692349ZE P04692349ZF P04692349ZG P04692349ZH P04692349ZK P04692349ZL P04692349ZM P04692349ZN P05091035AB P05091035AC P05091035AD P05091035AE P05091035AF P05091035AG P05091035AH P05091035AI P05091035ZF P05091035ZG P05091035ZH P05091035ZI
All 89 supported references
P05091035ZJ P05091035ZK P05091035ZL P05091035ZM P05091366AA P05091366AB P05091366AC P05091366AD P05091366AE P05091366AF P05091366AG P05091366AH P05091366AI P05091366ZA P05091366ZB P05091366ZC P05091366ZD P05091366ZE P05091366ZF P05091366ZG P05091366ZH P05091366ZI P68210553AA P68210553AB P68210553AE P68210553AF P68210553ZA P68210553ZB P68210553ZC P68210553ZE P68210553ZF P68210553ZG P68211629AC P68211629ZC P68234119AA P68234119AB P68234119AC P68234119AD P68234119ZA P68234119ZB P68234119ZC P68234119ZD P68240129AA P68240129AB P68240129ZA P68240129ZB P68283415AA P68283415AB P68283415ZA P68283415ZB P68283524AA P68283524ZA P68283524ZB P68342287AA P68342287AB P68342287AC P68342287ZA P68342287ZB P68342287ZC

You will find the part number on the factory sticker of the unit, normally alongside the serial. A match in this list confirms you are on the right page for the Chrysler Uconnect 8.4 RE2.

Chrysler Uconnect 8.4 RE2 Vehicle Compatibility

Vehicle Model Typical Production Years Notes
Chrysler 200, 300 (base trims) 2013-2015
Dodge Charger SE/SXT, Challenger SXT, Durango SXT, Grand Caravan 2013-2015
Jeep Cherokee KL (Latitude/Limited base), Wrangler JK 2013-2015
Ram 1500/2500/3500 (Tradesman, Express, Big Horn base) 2013-2015

Some vehicle models were available with several different factory radio depending on trim level, production year or regional market. Always verify your radio model before ordering a code.

Entering the code on the Chrysler Uconnect 8.4 RE2

The code goes straight into the radio, not into the car's menus.

  1. Turn the ignition on so the radio powers up and shows the locked screen.
  2. A keypad for the code fills the middle of the screen.
  3. Tap the four digits of your code in order.
  4. There is no separate OK button - the radio checks the code on the last tap.
  5. A correct code clears the lock screen and the audio comes straight back.

Things that can catch you out

Too many wrong attempts

After a few wrong entries the radio stops accepting codes for a while - cutting power only restarts the clock. After three wrong codes the screen shows "INCORRECT CODE - WAIT" with a 30-minute countdown. Keep ignition in RUN or ACC for the timer to run down.

I cannot find the serial number

It is printed on the housing, so the unit normally has to come forward to read it. White printed label on the top surface of the chassis, toward the rear. The unit must come out of the dash; there is no in-software display of the serial in lock mode.

Why it happened again

That is normal - the anti-theft system re-arms every time the unit loses power. Any 12V interruption longer than about a minute. Most common cause is a dead or replaced battery.

Making sure it is the right unit

The differences are easy to miss, so check this before ordering. RE2 has no maps. If tapping NAV draws a map, you have an RB4 or RB5, not an RE2. The RE2 home screen typically shows Radio, Media, Phone and More - no NAV tile.

Write the code down - the same four digits work for the life of the unit.

Questions About Your Chrysler Uconnect 8.4 RE2 Code

Usually yes, because the serial is printed on a label on the unit itself rather than shown on screen. Release keys are cheap and the unit only has to come forward far enough to read the label - there is no need to unplug anything.

No. The radio will ask for the code again after the next power cut, but it is the same code every time - it is burned into the unit and never changes. Keep it in the glovebox and future battery changes cost you nothing.

No. Every radio has its own code, calculated from its own serial number - a code from a different unit of the same model cannot work. Order the code for the serial printed on the radio that is actually in the dash.

It is. The code is generated with the manufacturer's own algorithm from your serial number, so it is the exact code a dealer would look up - the difference is the price and the fact that you do not have to book an appointment.

Yes. The code belongs to the radio and never changes, so if the battery is disconnected again in a year the same four digits will unlock it. It is worth writing it down and keeping it with the service book.

Pricing depends on the radio family and starts at $9.99. The exact amount for your serial is shown at checkout before you pay anything, so there is no surprise at the end.

Verified Customer Experiences

These are real orders and real radios. Hundreds more are on the reviews page.

"Fantastic: only to took 5seconds to receive code ..was skeptic at first..will fully recommend there services..Thanks saved alot of money : compared to taking it to the dealership..Very happy customer:"

Jason, Chrysler owner Verified purchase
Verified

Worked great! I ordered the code at 8pm est and received the code at 2am est put the code it this morning and radio is working great!

Kayla Turner TN - Chrysler

Verified

Dang I thought it was a scam but it’s not it’s true I paid for it the code came through and I put it in and it works thank you

Vandale - Chrysler

See the full list of reviews

What You Get

Your genuine code arrives the moment you pay, with an email copy for safe keeping.

Does not work? Every cent back - no questions beyond a short video.

Order at any hour - no dealership, no appointment, no towing.

The code never expires - keep it and future battery changes cost nothing.

Read the full refund policy

Other OEM Radio Models

Still unsure? These closely related units share much of the same hardware as the Chrysler Uconnect 8.4 RE2 and may be what you actually have.