Panasonic Chrysler Uconnect 8.4 UAC Asking for a Code? Get It Back Now

Panasonic | Chrysler | Instant Retrieval

At the dealer $120 92% Off!
With us: from $9.99?
Chrysler Uconnect 8.4 UAC radio - get the 4-digit unlock code from the serial number
Secure Payment
Get Code Instantly
296+ Reviews
See reviews →

The moment the payment clears, the code shows on screen and a copy lands in your inbox. Generation is automatic, so there is no queue and no office hours.

Then you get your money back - all of it. A short clip of the serial number and the code entry is the only thing we ask for before the refund goes out.
Read the full refund policy.

UAC is fleet-spec non-nav with feature flags reduced for commercial use. If your vehicle is a passenger car trim level, you probably have UAQ instead. The part number sticker carries the UAC reference.

Top of the chassis on a printed white sticker. Pull the radio out via three 7mm bolts; no on-screen serial display while in lock mode. That number (it starts with TM9) is all the code generation needs.

Serial Number Prefixes for the Chrysler Uconnect 8.4 UAC

Serial Prefix Status
TM9 Supported

If your serial starts with one of these, we can retrieve your code.

Getting your Chrysler Uconnect 8.4 UAC code

No VIN, no paperwork, no appointment - the serial number off the radio is the only thing we need.

  1. 1 Find the serial number On the factory sticker on the radio housing, beside the barcode. Most units have to come out of the dash - release keys cost a few dollars.
  2. 2 Type it in the form Copy it character for character. We check the format up front, so a typo never costs you anything.
  3. 3 Get your code The code is delivered instantly, day or night. Enter it on the radio and the anti-theft screen goes away.

Money-back guarantee if the code does not open your radio.

Serial number label on the Chrysler Uconnect 8.4 UAC chassis, used to generate the unlock code

An example from the same family - find the matching sticker on your unit.

Sample serials we handle

Examples of serial numbers we see on Chrysler vehicles:

TM9341100221 (prefix: TM9)
TM9128455907 (prefix: TM9)
TM9067230144 (prefix: TM9)

Common prefixes: TM9

Identify Your Chrysler Uconnect 8.4 UAC Radio

Not sure if your vehicle is equipped with the Chrysler Uconnect 8.4 UAC? Compare the design, controls, display and features listed below against your factory radio.

Identifying details:

  • Centre-stack 8.4" touchscreen
  • The home screen has no NAV tile and no maps on board
  • Shipped for the North America market
  • The chassis label carries the UAC sales code
  • Label serial opening with TM9

This is probably your radio if:

  • the factory label reads UAC
  • the label serial begins with TM9
  • the vehicle was built between 2017-2019
  • the screen is the 8.4" touchscreen fitted to the Uconnect 8.4
Before you decide:

UAC is fleet-spec non-nav with feature flags reduced for commercial use. If your vehicle is a passenger car trim level, you probably have UAQ instead. The part number sticker carries the UAC reference.

Overview of the Chrysler Uconnect 8.4 UAC

The Chrysler Uconnect 8.4 UAC is a dealer-installed Chrysler audio and multimedia unit. Alongside everyday radio and audio playback it may include touchscreen controls, Bluetooth, CD/DVD playback or factory navigation, depending on how the vehicle left the factory.

Uconnect 8.4 UAC is a North American Panasonic 8.4-inch head unit configured for fleet and commercial trim levels - 8.4-inch touchscreen with AM/FM, SiriusXM, Bluetooth and USB, no built-in maps. The home screen carries the standard Uconnect tiles without a NAV slot.

The Chrysler Uconnect 8.4 UAC was installed in various Chrysler models between 2017-2019. It was commonly fitted to vehicles built on the Panasonic multimedia platform and is still one of the more recognisable factory radios of that period.

Features you may find on the Chrysler Uconnect 8.4 UAC:

8.4" touchscreen

AM/FM radio

Bluetooth for hands-free calls and music streaming

Media playback over USB

SiriusXM satellite radio*

Steering wheel control support

Anti-theft security code

*Availability depends on the vehicle configuration.

Like many factory-installed radios, the Chrysler Uconnect 8.4 UAC is protected by an anti-theft system. If power is interrupted after replacing or disconnecting the vehicle battery, the unit may request the original radio code before it can be used again.

Background on the platform itself is published by the official Uconnect site.

How to Get the Serial Number From Your Radio

Every Chrysler Uconnect 8.4 UAC has a unique serial number, and the unlock code is worked out from it. You will find that number on the unit's own label - it is not in the service book and not on the dashboard.

Where exactly: Top of the chassis on a printed white sticker. Pull the radio out via three 7mm bolts; no on-screen serial display while in lock mode.

Getting to the label:

  1. Bring the radio out of its slot; release keys do it in a minute and nothing needs disconnecting.
  2. The serial is on the chassis sticker, usually right next to the barcode - copy it down.
  3. Enter it character for character - no spaces, no dashes.
What the serial looks like: TM9 followed by 9 digits (for example TM9123456789).
Factory sticker with the Chrysler Uconnect 8.4 UAC serial number for radio code retrieval

Where the label sits on this radio

See it done on camera

Chrysler Uconnect 8.4 UAC radio code by serial number - video thumbnail

From our YouTube channel - the same steps apply to this unit.

Chrysler Uconnect 8.4 UAC Technical Details

Specification Value
Manufacturer Panasonic
Radio Family Uconnect 8.4
Variant UAC
Market North America
Vehicle Brand Ram
Production Years 2017-2019
Display 8.4" touchscreen
Navigation No
Serial Prefixes TM9

Depending on the vehicle configuration, the Chrysler Uconnect 8.4 UAC may include extra multimedia features such as Bluetooth hands-free calling, USB media playback or factory navigation. Equipment levels can vary between production years and trims.

The Situations That Lock a Chrysler Uconnect 8.4 UAC

The lock screen almost never appears out of nowhere - one of these four situations is behind nearly every locked Chrysler Uconnect 8.4 UAC we see.

The previous owner had no code

Used cars routinely arrive with a locked radio and no code card in the glovebox. The serial number on the unit is all that is needed to recover it.

A different unit is in the dash now

A used unit from a donor car arrives locked, and the code from your old radio will not fit - the code follows each radio's own serial number, so order it for the serial on the REPLACEMENT unit.

The battery was disconnected

A new battery - or a flat one after the car sat for a while - cuts power to the radio, and the anti-theft system arms itself the moment power returns.

After electrical work

The repair worked - the locked radio is just the side effect of the battery being off the car for a while.

Whichever of these happened to you, the fix is identical: the serial number off the radio, the form at the top of this page, and the code is emailed in seconds.

Vehicles Equipped with the Chrysler Uconnect 8.4 UAC

Vehicle Model Typical Production Years Notes
Ram 1500/2500/3500 (Tradesman, Express, fleet trims) 2017-2019
Ram ProMaster, ProMaster City (commercial trims) 2017-2019

The vehicles listed above are the most common factory applications for the Chrysler Uconnect 8.4 UAC. Equipment packages and regional specifications vary, so verify the radio using its design, serial number or part number before ordering a code.

Supported OEM References 7

All of the part numbers listed here are covered. Match the one printed on your unit's label and you are in the right place.

68472588AD 68472588AE 68472588AF 68472588AG 68472588AH 68472588AI 68472588AJ

You will find the part number on the factory sticker of the unit, normally alongside the serial. A match in this list confirms you are on the right page for the Chrysler Uconnect 8.4 UAC.

Once the code arrives

Nothing to install and no tools needed - only the code itself.

  1. Turn the ignition on so the radio powers up and shows the locked screen.
  2. A keypad for the code fills the middle of the screen.
  3. Tap the four digits of your code in order.
  4. There is no separate OK button - the radio checks the code on the last tap.
  5. A correct code clears the lock screen and the audio comes straight back.

If something goes wrong

The screen shows a wait timer

The timer is the radio protecting itself after failed entries - power on, patience, then try again. Three wrong attempts triggers a 30-minute WAIT countdown. Keep ignition in RUN or ACC for the timer to run down.

Where the number actually is

The serial is on the unit itself, not in the vehicle papers or on the dashboard. Top of the chassis on a printed white sticker. Pull the radio out via three 7mm bolts; no on-screen serial display while in lock mode.

The radio locked itself again

Expected behaviour: the security system trips again whenever power is cut. Loss of 12V power - dead battery, replacement, or radio removal.

Making sure it is the right unit

The differences are easy to miss, so check this before ordering. UAC is fleet-spec non-nav with feature flags reduced for commercial use. If your vehicle is a passenger car trim level, you probably have UAQ instead. The part number sticker carries the UAC reference.

Write the code down - the same four digits work for the life of the unit.

Before You Order - Common Questions

No. The code for the Chrysler Uconnect 8.4 UAC comes from the radio's own serial number, not from the vehicle identification number. A VIN lookup only works on Renault and Dacia units - for every other make, including this one, the serial from the radio label is what we need.

Usually yes, because the serial is printed on a label on the unit itself rather than shown on screen. Release keys are cheap and the unit only has to come forward far enough to read the label - the wiring can stay connected.

No. Every radio has its own code, tied to its own serial number - a code from a different unit of the same model cannot work. Order the code for the serial printed on the radio that is actually in the dash.

The code is generated automatically as soon as the payment goes through, so it appears on screen in a few seconds and lands in your inbox at the same time. The service runs day and night, so there is no queue and no waiting for office hours.

It is. The code is calculated with the manufacturer's own algorithm from your serial number, so it is identical to what the dealer would give you - the difference is the price and the fact that you do not have to book an appointment.

You get your money back. Send us a short video showing the serial number and the code being entered, and we refund the order in full - no argument, no restocking fee.

Recent Customer Reviews

Left by customers after their radio came back to life. See the reviews page for all of them.

"Fantastic: only to took 5seconds to receive code ..was skeptic at first..will fully recommend there services..Thanks saved alot of money : compared to taking it to the dealership..Very happy customer:"

Jason, Chrysler owner Verified purchase
Verified

It’s legit, i’m skeptical about these kinds of websites but i trusted it and it worked, i got the code instantly. You guys should trust it if you’re struggling to find the anti theft code.

Chris M - Chrysler

Verified

Amazing people amazing service everything amazing I got my code immediately thank God for these people

Jesus Martinez - Chrysler

See every reviews

What You Get

The original code on screen seconds after you pay, emailed to you as well.

A complete refund whenever the code fails to open your unit.

Available 24/7 - no booking, no dealer visit, no towing.

Works every time - the code stays valid for the life of the radio.

Read the full refund policy

Explore Similar Factory Radios

Still unsure? These neighbouring units share much of the same hardware as the Chrysler Uconnect 8.4 UAC and may be what you actually have.