Aptiv Uconnect 7.0 VP2_7 JL JAP Asking for a Code? Get It Back Today
Aptiv | Chrysler | Instant Retrieval
Full guarantee details.
Accepted Serial Number Formats
| Serial Prefix | Status |
|---|---|
T0MYD |
Supported |
If your serial starts with one of these, we can retrieve your code.
How to get your code?
The whole process needs one piece of information and a few minutes.
- 1 Find the serial number Look for it on the chassis label. The radio normally has to come forward a little - the wiring can stay plugged in.
- 2 Enter the serial Exactly as printed, no spaces. The format is checked before any payment.
- 3 Get your code The code is on screen straight away and in your inbox. It never expires and keeps working every time power is cut.
If it does not work, you are refunded in full.
This is an example label - the one in your car sits in the same place and looks much like it.
Sample serials we handle
Common Chrysler serial numbers look like this:
T0MYD065910817
(prefix: T0MYD)
T0MYD164822563
(prefix: T0MYD)
Common prefixes: T0MYD
How to Identify the Aptiv Uconnect 7.0 VP2_7 JL JAP
Before requesting a radio code it is important to confirm the exact model. Match the design, controls, display and features below with the unit in your dashboard.
Identifying details:
- 7.0" touchscreen in the centre of the dash
- Built for the Japan market
- The chassis label carries the VP2_7 JL JAP sales code
- A serial that begins with T0MYD
It is the Aptiv Uconnect 7.0 VP2_7 JL JAP when:
- the chassis label carries the VP2_7 JL JAP sales code
- the serial on the label starts with T0MYD
- the build year falls inside 2019-2023
- the 7.0" touchscreen is the one the Uconnect 7.0 family uses
Japan-specific variant. Boots in Japanese by default. If your vehicle is a US, Canadian or European Wrangler JL, you have a different VP2.7 variant (NA UAG or JT ECE) - check the chassis part number against this page before paying.
Introducing the Aptiv Uconnect 7.0 VP2_7 JL JAP
The Aptiv Uconnect 7.0 VP2_7 JL JAP is a factory-fitted Chrysler audio and multimedia unit. Alongside standard radio and audio playback it may include touchscreen controls, Bluetooth, CD/DVD playback or factory navigation, depending on how the vehicle left the factory.
Aptiv Uconnect 7.0 VP2_7 JL (Japan) is the 7-inch touchscreen head unit configured for the Japan-market Jeep Wrangler JL. Same VP2_7 hardware as the North American 7-inch unit but with a Japanese-language UI, an FM tuner set to the Japanese 76-95 MHz band and Japan-market firmware defaults.
The Aptiv Uconnect 7.0 VP2_7 JL JAP was installed in various Chrysler models between 2019-2023. It was commonly fitted to vehicles built on the Aptiv multimedia platform and remains one of the more recognisable factory radios of that period.
Common features on this unit:
7.0" touchscreen
AM/FM radio on the Japanese 76-95 MHz FM band
Japanese-language menus
Bluetooth for hands-free calls and music streaming
Media playback over USB
Steering wheel control support
Anti-theft security code
*Availability depends on the vehicle configuration.
The Aptiv Uconnect 7.0 VP2_7 JL JAP carries the same anti-theft protection as most factory units. Once power is cut - a flat battery, a battery swap, or the radio being removed - it will ask for the original code before it comes back to life.
Background on the platform itself is published by Aptiv, the unit's manufacturer.
Locating the Aptiv Uconnect 7.0 VP2_7 JL JAP Serial Number
The code is generated from the radio's own serial number, so that number is the only thing you need before ordering. It is printed on the chassis label of the unit itself, not in the vehicle documents.
Where exactly: Top of the chassis on a white printed label. Radio removal is required - the unit does not expose the serial via any settings menu while in lock mode. JL dash bezel releases with plastic clips; the radio slides forward on four mounting bolts.
How to reach the number:
- Slide the radio out of the dash - most units need a pair of release keys, which cost very little online.
- Find the white label on the housing and read the serial off it - it sits beside the barcode.
- Type it into the form exactly as printed, without spaces.
The label you are looking for
Watch the whole process
From our YouTube channel - the same steps apply to this unit.
The Situations That Lock a Aptiv Uconnect 7.0 VP2_7 JL JAP
The lock screen almost never appears out of nowhere - one of these four situations is behind almost every locked Aptiv Uconnect 7.0 VP2_7 JL JAP we see.
The battery was replaced
A replacement battery - or a flat one after the car sat for a while - cuts power to the radio, and the anti-theft system arms itself the moment power returns.
You bought the car second-hand
No handbook, no code card, seller unreachable - none of it matters. The radio's own serial number carries everything needed to calculate the code.
A repair cut the power
Alternator, starter or fuse-box work usually means disconnecting the battery - and the radio arms its anti-theft as a side effect of the repair.
A replacement radio
Swapping in a second-hand radio means a new serial and therefore a new code - the one from the old unit cannot work.
The route back to a working radio is the same in every case: serial number in, original code out, within seconds.
Hardware Specifications
| Specification | Value |
|---|---|
| Manufacturer | Aptiv |
| Radio Family | Uconnect 7.0 |
| Variant | VP2_7 JL JAP |
| Market | Japan |
| Vehicle Brand | Jeep |
| Production Years | 2019-2023 |
| Display | 7.0" touchscreen |
| Serial Prefixes | T0MYD |
Treat the list above as the typical spec - individual Aptiv Uconnect 7.0 VP2_7 JL JAP units can have more or fewer features, depending on the factory options chosen for the car.
Supported Part Numbers 23
All of the part numbers listed here are covered. Match the one printed on your unit's label and you are in the right place.
The 23 references boil down to 5 base numbers - the trailing letters (AA, AB, ZC and so on) are hardware revisions of the same unit, and every revision is supported.
68428561AA
68428561AB
68428561AC
68428561AD
68428561AE
68428547AA
68428547AB
68428547AC
68428547AD
68428547AE
68428547AF
68474393AA
68474393AB
68474393AC
68474393AD
68474393AE
68428481AC
68428481AD
68428481AE
68428478AA
68428478AC
68428478AD
68428478AE
The part number is printed on the label on top of or on the side of the radio chassis, usually next to the serial number. If yours appears above, the Aptiv Uconnect 7.0 VP2_7 JL JAP is the right page.
Which Vehicles Use the Aptiv Uconnect 7.0 VP2_7 JL JAP?
| Vehicle Model | Typical Production Years | Notes |
|---|---|---|
| Jeep Wrangler JL (Japan-market, Sport/Sahara trims with 7-inch radio) | 2019-2023 |
Some vehicle models were available with several different factory radio depending on trim level, production year or regional market. Always confirm your radio model before ordering a code.
Putting the code into the radio
Nothing to install and no tools needed - only the code itself.
- Put the key in accessory position so the unit powers up and asks for the code.
- A four-digit keypad appears on the display.
- Key in the code, one digit at a time, left to right.
- The unit checks the code automatically on the last digit.
- Right code in, lock screen gone - the radio is back to its usual self.
Troubleshooting the Aptiv Uconnect 7.0 VP2_7 JL JAP
Locked after shaken inspection or battery work
The battery is often disconnected during the shaken inspection or a battery replacement, and that arms the anti-theft lock. The same code clears it every time - keep it with the vehicle papers.
The code prompt is in Japanese
The keypad digits are the same as on every other VP2_7 unit. Tap the four digits left to right; the radio verifies automatically on the fourth one.
INCORRECT CODE - WAIT appeared
Three wrong tries start a 30-minute timer that only counts down while the radio has 12V. Leave the ignition on until it ends, then try again.
Note the four digits somewhere safe - they are permanent and reusable after any power cut.
Aptiv Uconnect 7.0 VP2_7 JL JAP FAQ
Verified Customer Experiences
Short notes from people who used the service; the reviews page has the rest.
"Screen on our chrysler was cracked so i found a good used one from the local scrap yard. I was EXTREMELY skeptical of this after the other site I tried was flagged as suspicious activity. I did a little more investigating with findradiocode.com and everything I was reading was legit so I took t..."
I am very glad I found this website. The code I received was the correct code. I am so happy that my radio works. I have a 2019 Chrysler Pacifica. I replaced the radio with a used one. Sad I needed a code to fix it after...
Daniel LaCore - Chrysler
Fantastic: only to took 5seconds to receive code ..was skeptic at first..will fully recommend there services..Thanks saved alot of money : compared to taking it to the dealership..Very happy customer:
Jason - Chrysler
Ordering a Aptiv Uconnect 7.0 VP2_7 JL JAP Code
The original code on screen seconds after you pay, emailed to you as well.
Does not work? Every cent back - no questions beyond a short video.
Order at 3 a.m. or 3 p.m. - no dealership, no appointment, no towing.
The code never expires - keep it and future battery changes cost nothing.
Similar Radio Models
Still unsure? These closely related units share much of the same hardware as the Aptiv Uconnect 7.0 VP2_7 JL JAP and may be what you actually have.
For other Aptiv units? Start from the Aptiv radio code overview.