Get Your Aptiv Uconnect 7.0 UAG VP2_7 WD NA Radio Code in 3 Easy Steps
Aptiv | Chrysler | Instant Retrieval
See the full guarantee terms.
Compatible Serial Number Prefixes
| Serial Prefix | Status |
|---|---|
T0MYD |
Supported |
If your serial starts with any prefix above, we can recover your code.
Your code in three steps
One number, three steps, a couple of minutes.
- 1 Get the serial off the radio On the printed label on the radio housing, next to the barcode. Most units have to come out of the dash - release keys cost a few dollars.
- 2 Paste it into the box Just the serial and your email. The validator runs before the payment step.
- 3 The code comes back instantly The code is on screen straight away and in your inbox. It never expires and works after every battery disconnect.
If it does not work, you get your money back.
The photo is a stand-in: your radio wears an identical label.
What a valid serial looks like
Typical Chrysler serial numbers look like this:
T0MYD065910817
(prefix: T0MYD)
T0MYD164822563
(prefix: T0MYD)
Prefixes we see most: T0MYD
How to Recognize the Aptiv Uconnect 7.0 UAG VP2_7 WD NA
Before requesting a radio code it is important to confirm the exact model. Match the design, controls, display and features below with the unit in your dashboard.
Identifying details:
- 7.0" touchscreen in the centre of the dash
- A non-navigation unit: the menus never show a map
- Built for the North America market
- Sales code UAG VP2_7 WD NA on the chassis label
- A serial that begins with T0MYD
It is the Aptiv Uconnect 7.0 UAG VP2_7 WD NA when:
- UAG VP2_7 WD NA appears as the sales code on the label
- the serial on the label starts with T0MYD
- the car left the factory between 2019-2023
- the 7.0" touchscreen is the one the Uconnect 7.0 family uses
UAG is the 7-inch non-nav variant. If your screen draws maps when you tap a NAV tile, you have the 8.4-inch UJM nav unit instead. If your screen is 5 inches, you have the UAA or DT base radio - not UAG.
Aptiv Uconnect 7.0 UAG VP2_7 WD NA Overview
The Aptiv Uconnect 7.0 UAG VP2_7 WD NA is an original factory-installed infotainment system developed for selected Chrysler vehicles. Designed to provide reliable audio playback and vehicle integration, this unit may also offer Bluetooth connectivity, touchscreen controls, CD/DVD playback, navigation or multimedia support, depending on the exact configuration.
Aptiv Uconnect 7.0 UAG (VP2_7 platform) is the 7-inch non-navigation head unit for the North American Dodge Durango WD. The "UAG" code is the radio identifier. Wider screen than the 5-inch base unit, four-tile home layout, Apple CarPlay and Android Auto wired, but no built-in maps.
Chrysler used the Aptiv Uconnect 7.0 UAG VP2_7 WD NA on selected models produced between 2019-2023, typically alongside the Aptiv multimedia platform. It is one of the factory units most often encountered from that era.
Typical features include:
7.0" touchscreen
AM/FM radio
Apple CarPlay and Android Auto*
Hands-free Bluetooth with audio streaming
USB input for music playback
SiriusXM satellite radio*
Steering wheel control support
Anti-theft security code
*Availability depends on the vehicle configuration.
Like many factory-installed radios, the Aptiv Uconnect 7.0 UAG VP2_7 WD NA is protected by an anti-theft system. If power is interrupted after replacing or disconnecting the vehicle battery, the unit may demand the original radio code before it can be used again.
Platform details and official documentation are available from Aptiv, the unit's manufacturer.
Locating the Aptiv Uconnect 7.0 UAG VP2_7 WD NA Serial Number
Every Aptiv Uconnect 7.0 UAG VP2_7 WD NA has a unique serial number, and the unlock code is derived from it. You will find that number on the unit's own label - it is not in the service book and not on the dashboard.
Where exactly: White label on the top of the chassis, slightly toward the rear edge. The radio must come out of the dash to read it - no on-screen serial display while locked. The Durango WD centre stack releases with two trim clips and four 7mm bolts.
How to reach the number:
- Slide the radio out of the dash - most units need a pair of release keys, which cost a few dollars online.
- The serial is on the chassis sticker, usually right by the barcode - copy it down.
- Type it into the form exactly as printed, with no spaces or dashes.
Where the label sits on this radio
Watch the whole process
Our own clip of the unlock - more videos are on the channel.
How Owners End Up on This Page
The lock screen rarely appears out of nowhere - one of these four situations is behind almost every locked Aptiv Uconnect 7.0 UAG VP2_7 WD NA we see.
After electrical work
The repair worked - the locked radio is just the side effect of the battery being off the car for a while.
A different unit is in the dash now
A radio from a breaker or an online sale comes with its own serial, so it needs its own code - read the label on the unit you fitted.
A battery change
Whether the battery was changed or just ran flat, the radio sees a power loss and asks for the code the next time it starts.
The previous owner had no code
Used cars routinely arrive with a locked radio and no code card in the glovebox. The serial number on the unit is all that is needed to recover it.
The way out is the same in every case: serial number in, original code out, within seconds.
Technical Overview
| Specification | Value |
|---|---|
| Manufacturer | Aptiv |
| Radio Family | Uconnect 7.0 |
| Variant | UAG VP2_7 WD NA |
| Market | North America |
| Vehicle Brand | Dodge |
| Production Years | 2019-2023 |
| Display | 7.0" touchscreen |
| Navigation | No |
| Serial Prefixes | T0MYD |
Not every Aptiv Uconnect 7.0 UAG VP2_7 WD NA offers the same set of features. Bluetooth connectivity, navigation, USB support or multimedia playback may vary depending on the vehicle specification, production year and factory equipment package.
Factory Part Numbers 10
All of the part numbers listed here are supported. Match the one printed on your unit's label and you are in the right place.
The 10 references boil down to 2 base numbers - the trailing letters (AA, AB, ZC and so on) are hardware revisions of the same unit, and every revision is supported.
68428490AA
68428490AB
68428490AC
68428490AD
68428490AE
68428549AA
68428549AB
68428549AC
68428549AD
68428549AE
Look for the part number on the radio's identification sticker, typically beside the serial number. Any reference listed here is covered by this service.
Where Was the Aptiv Uconnect 7.0 UAG VP2_7 WD NA Installed?
| Vehicle Model | Typical Production Years | Notes |
|---|---|---|
| Dodge Durango WD (SXT, GT with 7-inch radio) | 2019-2023 | |
| Dodge Charger, Challenger (mid trims using the 7-inch VP2.7 NA radio) | 2019-2023 |
Vehicle compatibility can differ between trims, model years and regional versions. Because the same car could leave the factory with different radios, confirm your unit before placing an order.
Typing the code into your Aptiv Uconnect 7.0 UAG VP2_7 WD NA
It takes less than a minute once you have the four digits.
- Switch the ignition on and let the radio boot to its security screen.
- The code prompt appears with its own keypad.
- Enter the four digits in the order you received them.
- As soon as the last digit lands, the radio runs the check on its own.
- On a correct code the radio leaves security mode and plays again.
Common problems
The radio is counting down
A countdown means the anti-theft system is holding the unit. Leave the ignition on until it clears. After three wrong attempts the screen shows "INCORRECT CODE - WAIT" with a 30-minute countdown. Keep the ignition in RUN or ACC; cutting power restarts the 30-minute timer. The unit cannot be permanently locked.
The label is not where I expected
Only the radio itself carries it - slide the unit forward and the label is right there. White label on the top of the chassis, slightly toward the rear edge. The radio must come out of the dash to read it - no on-screen serial display while locked. The Durango WD centre stack releases with two trim clips and four 7mm bolts.
Locked again after it was fine
Nothing is broken. Any interruption to the 12V supply brings the lock screen back. Loss of 12V power - dead battery, battery replacement, alternator service, or radio removal. Body-shop repairs that disconnect the battery are the most common trigger we see on Durango.
Same face, different radio
One glance at the label removes the doubt - worth doing before the order. UAG is the 7-inch non-nav variant. If your screen draws maps when you tap a NAV tile, you have the 8.4-inch UJM nav unit instead. If your screen is 5 inches, you have the UAA or DT base radio - not UAG.
The code belongs to the radio and never changes, so keep it somewhere safe once you have it.
Aptiv Uconnect 7.0 UAG VP2_7 WD NA Radio Code - Questions and Answers
From Drivers Who Unlocked Their Radio
Left by customers after their radio came back to life. See the reviews page for all of them.
"It's definitely legit. My code came less the 3 minutes and I'm a car dealer and don't have time for scam websites. You guys are now my go to. Thanks"
Worked great! I ordered the code at 8pm est and received the code at 2am est put the code it this morning and radio is working great!
Kayla Turner TN - Chrysler
Bueno
Ricardo Rodriguez - Chrysler
What Is Included
Your original code arrives the moment you pay, with an email copy for safe keeping.
Does not work? Every cent back - no questions beyond a short video.
Runs around the clock, so a locked radio never waits for opening hours.
Works every time - the code stays valid for the life of the radio.
Other OEM Radio Models
The models below share the same family and are frequently mistaken for the Aptiv Uconnect 7.0 UAG VP2_7 WD NA. Not your radio? Open one of these.
Still not the right radio? See every Aptiv radio we support on the Aptiv radio code page.