Steps to Unlock Your 2023 Dodge Charger Radio
Vehicle radios use security codes tied to the radio unit itself instead of the vehicle model or production year.
- Our lookup service works by matching your Dodge Charger radio's serial number.
- Once the serial number is submitted, the system identifies the radio family and retrieves the corresponding code.
- You can then enter the code directly into your Dodge radio.
- Compared to Dodge dealer retrieval, this method is faster and more convenient.
Got the Code? Here's How to Enter It
When you obtain the correct unlock code based on the serial number, you can restore normal functionality by entering it into the unit.
The code entry process depends on the control layout, but most 2023 Charger systems follow a similar structure using preset buttons, touch controls, or rotary knobs - depending on if it's a factory or an aftermarket unit.
You will typically see SAFE displayed on screen.
Entering Process Explained
Entering the unlock code on the 2023 Charger's Uconnect 4C:
- With ignition ON, the screen shows "ENTER CODE" with an on-screen keypad.
- Enter each digit of your 4-digit code on the Charger's 8.4" touchscreen.
- The radio confirms automatically after the 4th digit — no separate confirm.
Lockout Warning: 3 wrong attempts = 60-minute lockout. Leave the Charger's ignition ON. Turning it off restarts the countdown.
Understanding the Radio Serial Number and How to Locate It on 2023 Charger
The useful thing to know is that factory radios use a specific serial number to identify each unitindividually.
Your security system matches the code directly to this serial.
Unlike vehicle-specific data like VIN or registration information, it is not determined by the model or production year, so you'll be able to generate it even if you have a radio that you installed afterwards.
Depending on the manufacturer and radio installed in your Dodge Charger, the retrieval method is different.
These are the best ways to locate it.
Screen-Based Serial Lookup Method
Try the following for your 2023 Dodge Charger:
The 2023 Dodge Charger's last-run Uconnect 4C (RA4) 8.4" touchscreen sits prominently in the performance sedan's center stack. The serial number is retrievable directly on screen via Dealer Mode:
- Turn ignition to ACC or ON.
- Press the bottom-left and bottom-right corners of the physical screen bezel (the plastic frame, not the glass) simultaneously for 5 seconds.
- Dealer Mode loads on the display.
- Navigate to: System Info → Radio Part Info → Serial Number.
Note Some 2023 Charger units may have Dealer Mode restricted after a software update. If the bezel press doesn't respond, physical radio removal is required.
Releasing the Radio Unit to See the S/N on the Tag
If the serial number cannot be accessed through menu, use the hardware method.
Most Dodge Charger OEM radios include a sticker with the serial number printed on the casing.
Step-by-Step:
- Turn off the vehicle.
- Detach the trim surrounding the radio.
- Loosen the mounting bolts.
- Slide the unit slightly out to access the label.
The serial number is usually located near the printed code.
If Dealer Mode is blocked on your 2023 Charger, the RA4 radio needs to be removed to read the serial label. The Charger's cockpit-style center stack makes the procedure manageable:
- Remove the center stack bezel – The Charger's bezel covers the 8.4" display. Work a plastic trim tool around the edges to pop off the friction-clipped panel.
- Remove the 4 Torx T20 screws – Holding the radio frame to the dash structure.
- Pull the unit forward – Slide the radio forward to read the serial label on the side surface.
The 14-character serial is on a barcode sticker. Cables don't need to be unplugged.
Example: Dodge Charger serial number label location
What a Valid Serial Number Looks Like
Year Dodge Charger Uconnect 4C (RA4) serial number formats:
T00AM– Primary Harman prefix for Uconnect 4C unitsT00BE– Continental-sourced version
Radio designation: RA4 (Uconnect 4C, 8.4"). Serial: 14 characters (e.g., T00AM5028A1842). The final-generation Charger ran this platform through its last model year in 2024.
Note: The serial number is not the same as the part number (begins with P or 68). The serial alone generates the unlock code.
Fixing Common Code Entry Problems for 2023 Charger
The Charger's Uconnect 4C uses touchscreen-only input for code entry — no hardware keys are used. When the locked screen appears:
- Tap each digit on the on-screen number pad.
- The Charger's Uconnect auto-confirms after the 4th digit — no confirm button needed.
Should the screen not respond, cycle the ignition and wait 30 seconds.
Three wrong entries on the Charger's Uconnect 4C cause a 60-minute lockout, displaying "WAIT":
- Leave the ignition in the ON position — engine off is fine but ignition stays ON.
- Allow the entire 60 minutes.
- Cycling the ignition resets the timer.
Once clear, try the verified code again.
If the Charger's screen doesn't show after a battery event:
- Ensure the ignition is fully ON (not ACC) and allow 15–20 seconds to boot.
- Inspect the radio fuse — fuse failure prevents the display from powering.
- On some 2023 Charger units, a OTA update may delay the code prompt — tap the screen once to trigger it.
If the screen stays dark, power issue is the most likely cause.
The RA4 label in the 2023 Charger shows two distinct identifiers:
- Serial number — 14 characters, starting with
T00AMorT00BE. Use this one. - Part number — begins with
P05or68. Do not use this.
Dealer Mode via bezel corner press is most reliable way: System Info → Radio Part Info → Serial Number. No tools required.
Code failure on the Charger's RA4 usually means a serial number error. The label has the serial (14 characters, starts with T00AM or T00BE) and the part number (P... or 68...) — only the serial generates a code.
Re-check the serial on screen or the label and reach out for a free re-check if needed.
What Caused the Radio to Lock?
Charger owners face this most often because of:
- Battery replacement — any battery swap triggers the lock on any Uconnect-equipped vehicle including the Charger.
- Seasonal storage and battery drain — muscle sedans left parked over winter drain enough to trigger the anti-theft.
- Performance electrical work — Charger enthusiasts working on the electrical system will trigger the lock.
- Used purchase — buying a used Charger without the original unlock code means the radio is locked on arrival.
The unlock code is permanently linked to the serial number and does not change.