Recover Ford C-Max 2013 Radio Code In Seconds

Unlock your 2013 Ford C-Max radio in just a few minutes. Simply enter the radio serial to generate your code - no VIN required. Follow the full guide below if you need help finding or entering your code.

You only need your serial number from the radio.
It takes less than a minute.

You'll usually get your Ford C-Max code in seconds.
Rare Ford cases may take up to 24 hours.

Your purchase is risk-free with our refund policy.
Proof may be required (a quick video).
Review our Refund Policy for complete terms.

Serial Number Patterns:

Your radio serial may start with: M, V

Serial Number Examples:

M123123 (M)
V123123 (V)
C7E3F0547A3240643
Ford C-Max 2013 car photo
Dealer price $120 92% Off!
Our price: from $9.99
Safe Payment
Get Code Instantly
321+ Reviews
See reviews →

Why Did the Radio Lock and Ask for a Code?

Ford SYNC 1 and Sony-branded radios from 2007–2014 carry the same power-loss anti-theft system as older Ford radios. Any cut in the power supply triggers the lock at next startup:

  • Battery replacement or disconnect — the usual cause.
  • Dead battery — a fully drained battery activates the code prompt just like a manual disconnect.
  • Radio removal — removing the unit for service cuts the power connection, triggering the lock when reinstalled.

Worth mentioning: true Ford SYNC 1 systems (with Bluetooth) can also lock after a battery event, even though SYNC the connectivity system is separate from the radio anti-theft. Supplying the correct code re-enables the radio; SYNC itself typically reconnects automatically once the radio is unlocked.

Locate the Serial Number Needed to Generate Ford C-Max 2013 Radio Code

Very important thing to know is that factory radios use a unique serial number to identify each unitindividually.

The security system matches the code directly to the serial.

Unlike car-specific data like VIN or registration information, it is not determined by the model or production year, so you'll be able to get it even if you have an aftermarket radio.

Depending on the maker and radio installed in your Ford C-Max, the access method is different.

These are the best ways to locate it.

2013 C-Max - Which Radio Did You Get?

  1. Ford 6000 CD - single-DIN CD head unit with a narrow monochrome display, the base fitment.
  2. Ford SYNC 1 - optional voice and Bluetooth system with a small central display and SYNC menus.

The 2013 C-Max (Mk2, C344, including Grand C-Max) carries the same audio platform as 2012. Identify SYNC 1 by the SYNC splash on start-up and the dedicated voice and phone buttons on the fascia.

Before Removing the Radio, Try This Screen Method

These are the steps you should follow for 2013 Ford C-Max:

The 2013 Ford C-Max may be equipped with a Ford Sony or Ford 6000CD radio. These units typically don't have an on-screen serial display function.

The serial number must be read from the physical label on the radio unit itself. Extraction of the radio is necessary. See instructions below.

Try this first (Ford 6000CD): Press and hold buttons 1 and 6 together for 2–3 seconds. The radio displays system information — the serial (e.g., V197905) is shown last. If no serial showed, try holding buttons 2 and 6 for the M serial variant. Certain SYNC and Sony modules might not respond to this method — continue with physical removal if the button combination doesn't work.

Occasionally the serial appears split across two screens — join the two halves to get the full serial.

Quick Method: Find the Serial Number on the Screen

On the 6000 CD unit in 2013 Mk2 C-Max cars, the serial is usually exposed by a hidden self-test screen.

Ford 6000 CD

  1. Set the ignition to accessory and switch the radio on.
  2. Press and hold preset 1 and preset 6 together for several seconds.
  3. Watch the display cycle through internal data and read the serial line; it typically begins with V.
  4. If the display does not change, the hidden mode is disabled on that build and you should remove the unit instead.

SYNC 1 is VIN-paired and does not use a user-entry radio code, so this display method does not apply to SYNC 1 cars.

Find the S/N by Pulling Out the Radio Unit

If the serial number cannot be accessed through menu, use the hardware method.

Most Ford C-Max OEM radios include a label with the serial number printed on the housing.

The process:

  • Disable power.
  • Lift away surrounding panel pieces.
  • Release clips holding the radio.
  • Pull forward to inspect the label.

To access the serial on the 2013 Ford C-Max:

  1. Power down the vehicle.
  2. For Ford 6000CD/4500: Use extraction keys in the 4 pin holes on each side of the radio. Insert until they click, then pull the unit forward.
  3. For SYNC/Sony integrated units: Pry off the center stack trim with a trim removal tool, then unscrew the four screws and pull the unit out.
  4. Read the serial number label on the top of the unit. It starts with M or V.

Tip: Models with Sony premium audio may have a heavier unit. The SYNC units are usually bolt-mounted rather than pin-released.

Releasing the Radio Unit to View the S/N on the Tag

If the display method is unavailable on the 6000 CD, the single-DIN unit releases from the DIN cage with Ford extraction keys.

Safety: ignition off, key out, disconnect the negative battery terminal, wait a few minutes. Avoid yellow SRS connectors behind the dash trim.

Tools needed:

  1. Ford U-shaped radio extraction keys (set of four).
  2. Plastic trim removal tool.
  3. Flashlight and a phone camera.
  1. Insert one extraction key into each of the four side slots until the internal clips release.
  2. Pull both pairs of keys outward in parallel to slide the radio forward.
  3. Disconnect the antenna lead and rear connector only after the chassis is clear of the cage.
  4. Read the serial sticker on the top or left side of the metal chassis - look for S/N or Serial.
  5. Photograph the label and double-check 0 vs O and 1 vs I before transcribing. The unlock code is not printed on the unit.

SYNC 1 is integrated into a larger infotainment module that is VIN-paired; removal is not necessary for a user-entry radio code on that variant.

Ford C-Max 2013 radio serial number label location

Example: Ford C-Max serial number label location

Typical Serial Number Formats for 2013 C-Max Radios

The 2013 Ford C-Max radio serial number format:

  • M###### – Standard Ford serial prefix
  • V###### – Visteon serial prefix

Radio types for the 2013 C-Max: Ford 6000CD (base), Sony (premium), Ford SYNC (with Bluetooth). All types use the same M or V format.

Reminder The serial is 7 characters total. Just the M or V serial is needed for code retrieval.

Typical Radio Serial Prefixes and Formats

The serial layout is dictated by the supplier of the head unit, not by Ford. Verifying the pattern protects against copying the wrong line from the label.

  1. Ford 6000 CD (Mk2 build): typically a V prefix followed by six characters.
  2. Ford SYNC 1: VIN-paired - no manual user-entry code applies, so there is no serial-based code procedure for that variant.
  3. Validation: look for the line marked S/N or Serial, ignore the part number, and recheck 0 vs O and 1 vs I before submitting.

Unlock Your 2013 Ford C-Max Radio in Minutes - How It Works

Car radios use anti-theft codes dependent on the radio unit itself rather than the vehicle model or production year.

  • The generator identifies your Ford radio via serial-based verification.
  • After entering the serial into the form above, the system identifies the radio unit and generates the code that you need.
  • You can then enter the code directly into your Ford radio.
  • Compared to Ford dealer retrieval, this method is faster and more convenient.

Code Entry Instructions

After receiving 2013 Ford C-Max radio code from the serial number, you're ready to reactivate the radio.

Many drivers hesitate at this stage because input process can look different across radio versions, but it's usually quick.

When the radio shows dashed lines, it means the unit is waiting for the correct numbers.

Entering Process

To enter the code on the 2013 Ford C-Max:

  1. Ignition ON. Radio shows "CODE" or "SAFE".
  2. Press buttons 1-4 to set each digit of the 4-digit code. Each press advances the digit.
  3. Press button 5 (or OK) to submit the code.

Lockout: Ten wrong attempts triggers "LOCKED" or "WAIT". Leave the radio switched on for up to 1 hour — it will return to the code prompt automatically. If "Locked 10" appears, try holding button 6 while switching the radio on for 3 more attempts.

Step-by-Step Code Input Guide

Enter the four-digit code carefully on the 6000 CD head unit. Digits are selected with preset 1 to 4 and the entry is confirmed with preset 5.

Limited Attempt Warning: the Ford 6000 CD allows ten total attempts. After ten incorrect entries the display reads LOCKED 10 and a hidden bypass releases three further attempts; failing those triggers LOCKED 13, a permanent user-level lock.

Ford 6000 CD

  1. Set the ignition to accessory and switch the radio on.
  2. Wait for the CODE - - - - prompt.
  3. Press preset 1 repeatedly until the first digit is shown.
  4. Press preset 2 for the second digit, preset 3 for the third, and preset 4 for the fourth.
  5. Press preset 5 to confirm.
  6. If WAIT or CODE INCORRECT PLEASE WAIT is shown, leave the radio on with ignition in accessory until the wait state clears - do not retry during that interval.

SYNC 1 is VIN-paired and does not use a manual user-entry code; these steps do not apply to a SYNC 1 system.

Troubleshooting Common Radio Problems - C-Max 2013

Ford SYNC 1 and Sony-equipped radios display "LOCKED" after 10 incorrect entries. To recover:

  1. Leave the radio switched on — do not turning it off during the wait.
  2. Wait up to 1 hour. The radio should automatically return to the "CODE" display.
  3. If "Locked 10" appears, try holding button 6 while switching the radio on to receive additional attempts.

Should the unit remains permanently locked after waiting the full hour, a dealer visit or unit replacement may be needed.

Ford SYNC 1 and Sony-era radios use preset buttons 1–4 for digit entry and button 5 (or OK) to confirm — same as the older Ford 6000CD platform:

  • Buttons 1–4 — press each repeatedly to advance through digits for that position in the 4-digit code.
  • Button 5 or OK — press to confirm the complete entry.

For SYNC-integrated units with a dot-matrix display, the current digit appears on screen with each press — making it straightforward to check each digit before confirming. Sony premium units use the identical method.

When the radio turns on without showing a "CODE" prompt:

  • The unit might not be code-locked — test normal radio and Bluetooth operation to confirm.
  • Certain SYNC 1 units display "SAFE" momentarily before the code screen — allow a few seconds for it to change to the full code prompt.
  • For Sony premium audio trims: the Sony branding screen may appear first before the code prompt — allow several seconds for the system to initialize.

An unresponsive screen usually suggests a power or fuse issue rather than a lockout. Inspect the relevant fuse in the fuse box panel before assuming a hardware fault.

For the Ford SYNC 1 and Sony era, a rejected code most often caused by the wrong serial being submitted. Sony premium audio units have no on-screen display for the serial — it must be read from the physical sticker on the unit. Verify the serial starts with M or V and is exactly seven characters long.

After a failed entry, avoid entering further guesses — ten attempts are available before a lockout. Contact support for a free recheck to verify the serial prior to retrying.

SYNC 1 and Sony radios from this era use the same serial format as all Ford OEM radios:

  • M###### — M followed by six digits (most typical format).
  • V###### — V followed by six digits (used on Visteon-supplied units).

These radios have no an on-screen serial display — the serial is only accessible from the physical label on the radio chassis, which requires extracting the radio. See the removal section above for step-by-step guidance. Ford part numbers on the same label (e.g., AM5T-18C815-...) should not be submitted as the serial.