Chrysler RBY Alpine Radio Code - Instant Online Recovery

Alpine | Chrysler | Instant Retrieval

Garage price $120 92% Off!
Our price: from $9.99?
Chrysler RBY Alpine head unit asking for its anti-theft radio code
Safe Payment
Get Code Instantly
303+ Reviews
See reviews →

The moment the payment clears, the code shows on screen and a copy goes to your inbox. Generation is automatic, so there is no queue and no office hours.

Then you get your money back - in full. A short clip of the serial number and the code entry is the only thing we ask for before the refund goes out.
See the refund policy.

RBY uses its own part-number block - P05064383, P05091519, P05091609, P05140895, P56038583. If your part number falls outside these ranges you likely have RBT or RBL instead. The rear-seat-entertainment AUX inputs on the chassis back are present only on RBY.

Top of the radio chassis. On RSE-equipped vans the chassis is bolted in with two extra harness retainers - unclip these before sliding the unit forward. Removal uses two T20 Torx on the side rails plus a single 7mm bolt at the bottom centre of the bezel. That number (it starts with TQ1AA, TT1AA, TH1AA, THAAA, TCAAA) is all the code generation needs.

Compatible Serial Number Prefixes

Serial Prefix Status
TQ1AA Supported
TT1AA Supported
TH1AA Supported
THAAA Supported
TCAAA Supported

If your serial starts with one of these, we can retrieve your code.

Three steps to your code

The whole process needs one piece of information and a few minutes.

  1. 1 Check the unit's sticker Look for it on the sticker on the housing. The radio normally has to come forward a little - the wiring can stay plugged in.
  2. 2 Put it in the form on the left Exactly as printed, no spaces. The format is checked before you pay.
  3. 3 The code is delivered instantly You get the digits immediately, with an email copy to keep. Type them into the radio and it plays again.

Money-back guarantee if the code does not open your radio.

Where the Chrysler RBY Alpine serial number is printed - the code is derived from it

This is an example label - the one in your car sits in the same place and looks much like it.

What a valid serial looks like

Examples of serial numbers we see on Chrysler vehicles:

TQ1AA067945500 (prefix: TQ1AA)
TT1AA2179M3571 (prefix: TT1AA)
TH1AA1366J4777 (prefix: TH1AA)
THAAA1357K1794 (prefix: THAAA)
TCAAA1544K0931 (prefix: TCAAA)

Prefixes we see most: TQ1AA, TT1AA, TH1AA, THAAA, TCAAA

Identify Your Chrysler RBY Alpine Radio

Before ordering a radio code it is important to confirm the exact model. Compare the design, controls, display and features below with the unit in your dashboard.

Visual clues on this unit:

  • The chassis label carries the RBY sales code
  • Label serial opening with TQ1AA, TT1AA, TH1AA, THAAA, TCAAA

This is probably your radio if:

  • the chassis label carries the RBY sales code
  • the label serial begins with TQ1AA, TT1AA, TH1AA, THAAA, TCAAA
  • the car left the factory between 2001-2007
Careful - there is a lookalike

RBY uses its own part-number block - P05064383, P05091519, P05091609, P05140895, P56038583. If your part number falls outside these ranges you likely have RBT or RBL instead. The rear-seat-entertainment AUX inputs on the chassis back are present only on RBY.

Everything You Need to Know About the Chrysler RBY Alpine

The Chrysler RBY Alpine is a dealer-installed Chrysler audio and multimedia unit. Alongside standard radio and audio playback it may include touchscreen controls, Bluetooth, CD/DVD playback or factory navigation, depending on how the vehicle left the factory.

RBY is the Alpine premium single-CD/cassette variant primarily fitted to the early-2000s Town & Country and Jeep Grand Cherokee WJ Overland with the Infinity speaker package. Externally similar to RBT but tuned for the rear-cabin entertainment harness wiring used in long-wheelbase minivans.

Look for the Chrysler RBY Alpine in Chrysler vehicles from 2001-2007. It came with the Alpine multimedia platform and is still found in many cars from that period.

Features you may find on the Chrysler RBY Alpine:

AM/FM radio

CD player

CD playback

AUX and USB input*

Steering wheel control support

Anti-theft security code

*Availability depends on the vehicle configuration.

As with other Alpine factory units, the Chrysler RBY Alpine locks itself when power is lost. After a battery disconnect or a workshop visit the screen will ask for the original security code before any audio returns.

Background on the platform itself is published by Alps Alpine, the unit's manufacturer.

How to Read the Serial Number Off Your Chrysler RBY Alpine

Your unlock code is bound to the radio's serial number, so it is the one detail the form asks for. The number lives on the label printed on the housing of the radio itself.

On this unit: Top of the radio chassis. On RSE-equipped vans the chassis is bolted in with two extra harness retainers - unclip these before sliding the unit forward. Removal uses two T20 Torx on the side rails plus a single 7mm bolt at the bottom centre of the bezel.

Three steps to the serial number:

  1. Pull the unit forward with release keys (cheap online) - the wiring can stay plugged in.
  2. Find the printed label on the housing and read the serial off it - it sits beside the barcode.
  3. Enter it character for character - no spaces, no dashes.
Format on the label: TQ1AA, TT1AA, TH1AA, THAAA or TCAAA and then 9 more characters.
Serial number label on the Chrysler RBY Alpine chassis, used to generate the unlock code

Where the label sits on this radio

How Owners End Up on This Page

Almost all of the Chrysler RBY Alpine codes we generate follow one of these four events.

Back from the mechanic, radio locked

Mechanics routinely disconnect the battery before electrical work. The car comes back fixed and the radio comes back locked - expected, not a fault.

A used car with a locked radio

Second and third owners rarely get the code card. The radio itself still carries everything needed - its serial number.

The battery was disconnected

The most common trigger by far: the moment the battery is disconnected, the radio forgets it was ever unlocked and asks for its code on the next start.

A unit from a donor car

A radio from a breaker or an online sale comes with its own serial, so it needs its own code - read the label on the unit you fitted.

The route back to a working radio is the same in every case: serial number in, original code out, within seconds.

OEM Technical Specifications

Specification Value
Manufacturer Alpine
Radio Family Alpine
Variant RBY
Vehicle Brand Chrysler / Dodge / Jeep
Production Years 2001-2007
Serial Prefixes TQ1AA, TT1AA, TH1AA, THAAA, TCAAA

Equipment on the Chrysler RBY Alpine differs with the car it came in: navigation, Bluetooth, USB and media playback depend on trim, market and model year.

Vehicles Equipped with the Chrysler RBY Alpine

Vehicle Model Typical Production Years Notes
Chrysler Town & Country LXi/Limited (Infinity audio) 2001-2007
Dodge Grand Caravan ES (Infinity audio, RSE-equipped vans) 2001-2007
Jeep Grand Cherokee WJ Overland (premium audio) 2001-2007

Some vehicle models were available with several different factory radio depending on trim level, production year or regional market. Always verify your radio model before ordering a code.

Factory Part Numbers 18

The Chrysler RBY Alpine was built under the part numbers below. Spot the one on your unit's label and you can be sure this is the right page.

Do not worry about the trailing letters: the 18 numbers span 5 base references, and the letter suffixes only mark production revisions - the code works across all of them.

P05064383AA P05064383AB P05064383AC P05064383AD P05064383AE P05064383AF P05091519AA P05091609AA P05091609AB P05091609AC P05091609AD P05140895AA P56038583AD P56038583AE P56038583AF P56038583AG P56038583AH P56038583AI

The part number is printed on the sticker on top of or on the side of the radio chassis, usually next to the serial number. If yours appears above, the Chrysler RBY Alpine is the right page.

How to enter your Chrysler RBY Alpine code

Nothing to install and no tools needed - only the code itself.

  1. Turn the key so the unit boots to its code screen.
  2. Power-up shows "CODE - - - -". Use preset buttons 1-4 to step each digit. Press preset 5 to confirm. RBY in minivans with RSE may briefly cycle the rear screen on confirm; ignore the flicker.
  3. With the correct code in, the CODE screen disappears and audio comes back.

When it does not go to plan

The radio is counting down

A countdown means the anti-theft system is holding the unit. Leave the ignition on until it clears. Three wrong codes triggers "WAIT" with a one-hour countdown. Keep ignition in ACC so the timer counts down.

Where the number actually is

The serial is on the unit itself, not in the vehicle papers or on the dashboard. Top of the radio chassis. On RSE-equipped vans the chassis is bolted in with two extra harness retainers - unclip these before sliding the unit forward. Removal uses two T20 Torx on the side rails plus a single 7mm bolt at the bottom centre of the bezel.

The radio locked itself again

Expected behaviour: the security system trips again whenever power is cut. Battery disconnect, dead battery, RSE harness service, or removal of the head unit.

Same face, different radio

One glance at the label removes the doubt - worth doing before the order. RBY uses its own part-number block - P05064383, P05091519, P05091609, P05140895, P56038583. If your part number falls outside these ranges you likely have RBT or RBL instead. The rear-seat-entertainment AUX inputs on the chassis back are present only on RBY.

The code belongs to the radio and never changes, so keep it somewhere safe once you have it.

Before You Order - Common Questions

No. The radio will ask for the code after the next power cut, but the code itself stay the same - keep them and the next battery change is free.

Exactly the one the factory assigned. The code comes from the maker's algorithm applied to your serial, so a dealer would give you the same digits.

Absolutely. The lockout limits code entry only. Order while the timer runs, and the code is ready as soon as the radio accepts input again.

Then it is on us: a short video of the serial and the code entry is enough and the order is refunded completely, no argument.

Yes. The code belongs to the radio and never changes, so if the battery is disconnected again in a year the same four digits will unlock it. It is worth writing it down and keeping it with the service book.

In most cases, yes - the serial is on the unit's own label, not on the screen. Cheap release keys bring the radio forward far enough to read it, and the wiring can stay plugged in.

Verified Customer Experiences

Short notes from people who used the service; the reviews page holds the full list.

"I am very glad I found this website. The code I received was the correct code. I am so happy that my radio works. I have a 2019 Chrysler Pacifica. I replaced the radio with a used one. Sad I needed a code to fix it after replacing it."

- Daniel LaCore, Chrysler owner Verified purchase
Verified

Had to replace the head unit and bought one on eBay but the anti theft code wasn’t provided. This option to get it worked out well

Bill wagner - Chrysler

Verified

Doesn’t work scarm

john - Chrysler

More customer reviews

What Is Included

Code delivered instantly once payment clears - on screen and in your inbox.

Does not work? Full refund - no questions beyond a short video.

Order at 3 a.m. or 3 p.m. - no dealership, no appointment, no towing.

The code never changes - keep it and future battery changes cost nothing.

See the full guarantee terms

You May Also Have

These units are often mixed up with the Chrysler RBY Alpine. If the details above do not match your radio, check one of these instead.

The Chrysler RBY Alpine is one of many Alpine head units we support - the Alpine radio codes page lists all of them.