How to Retreat 2014 Chrysler Town & Country Radio Code [Instant]

Radio showing LOCKED? Your Chrysler Town & Country 2014 can be unlocked quickly using the radio serial. Enter it in the form and use the steps below if you need guidance.

You'll usually get your Chrysler Town & Country code in seconds.
Manual lookup may take a bit longer (full day).

You're covered by a 100% money-back guarantee.
A quick proof may be required.
Review our Refund Policy for complete terms.

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

T0MYD164822563 (T0MYD)
T00BE351823197 (T00BE)
TM9341100221 (TM9)
Dealer price $120 92% Off!
Our price: only $19.99
Secure Payment
Get Code Instantly
266+ Reviews
See reviews →
Guaranteed refund if the code is invalid
Chrysler Town & Country 2014 car photo
How to find Chrysler Town & Country 2014 radio serial number

How the Code Retrieval Process Works for Chrysler Town & Country 2014

To get the code, you'll take only 4 simple steps.

  1. Locate the radio's serial - this is the only info required to generate the correct unlock code.
    Unlike dealership lookup, no VIN is needed.
  2. When you've found the S/N, type it into the form above.
    Our system checks it against a database of supported units and automatically finds the matching anti-theft code.
  3. In most cases, the code appears instantly on the screen after payment and is also sent to your email , just in case.
    If we need to check it manually, you'll be notified before checkout.
  4. When you receive the code, just enter it into your radio to restore the functionality.

Unlocking the Radio After Code Generation

Now that you've generated 2014 Chrysler Town & Country radio code from the S/N, you're ready to reactivate the radio.

Some drivers hesitate at this stage because input process can look different across radio versions, but it's usually quick.

When the radio shows ENTER CODE, it means the unit is waiting for the correct numbers.

Correct Entering Process

To unlock the 2014 Chrysler Town & Country Uconnect 8.4":

  1. Turn ignition to ON. Screen shows "ENTER CODE".
  2. Use the touchscreen keypad to enter your 4-digit code.
  3. Radio auto-confirms after the 4th digit.

3 wrong attempts cause a 60-minute lockout. Keep ignition ON throughout. Switching off restarts the timer.

Entering the 4-Digit Code on a 2014 Town & Country Radio

Once the unlock code has been retrieved for a 2014 Town & Country radio, the digits can be entered straight at the head unit - no scan tool or dealer visit is required.

Limited Attempt Warning

  • The radio allows roughly three consecutive wrong tries before it enters a timed WAIT state.
  • To clear the wait, the radio must remain powered with the ignition in the RUN position for around 30 minutes - do not pull the key or disconnect the battery during this window.
  • Verify each digit on the screen against the written code before submitting; do not guess any digit.

Code Entry Procedure

  • Turn the ignition to the ACC or RUN position so the radio powers up and shows the CODE or Enter Anti-Theft Code prompt.
  • On the RBZ/RHB MyGIG (6.5") units, key the four digits using the on-screen number pad.
  • On the base RES head unit, press preset button 1 the required number of times for the first digit, button 2 for the second, button 3 for the third, and button 4 for the fourth.
  • Confirm the displayed digits match the code sheet exactly before submitting.
  • Press and hold the OK/ENTER control - or the rightmost on-screen preset on the RBZ/RHB touchscreen - for two to five seconds to validate the entry.

If the Code Is Rejected

  • Wait for any countdown shown on the screen to fully clear before retrying - the lock-out gets longer with repeated wrong tries.
  • Re-check each digit against the chassis-label serial, then re-enter exactly as written.
  • If repeated correct entries still fail, stop and re-verify the serial number rather than continuing to guess.

Finding the Radio S/N for Chrysler

The initial step is to locate the radio's S/N.

Depending on the radio unit installed in your 2014 Town & Country, the S/N can usually be accessed either through the display menu or by pulling the unit out and checking the label on the radio itself.

Below are the most common methods to identify your serial quickly.

Factory Radios on the 2014 Chrysler Town & Country

The 2014 Town & Country carried the same three-tier MyGIG/RES factory radio family with no significant hardware changes. The three-letter sales code is printed in the lower right corner of the radio faceplate near the AUX jack.

  • RES - Media Center 130 (CD/MP3): Standard on Touring base trim. Single-DIN non-touchscreen unit with twin rotary knobs, monochrome segment display, CD slot and front AUX input.
  • RBZ - Media Center 430 (MyGIG, non-nav): Standard/optional on Touring-L and higher. 6.5" colour resistive touchscreen, CD/DVD slot, internal hard drive, integrated Bluetooth and SiriusXM. Mitsubishi-built head unit on the low-speed CAN bus, with no NAV button on the bezel.
  • RHB - Media Center 430N (MyGIG with Garmin Navigation): Optional on Touring-L, standard on Limited. Same 6.5" touchscreen as the RBZ but with a dedicated NAV hard key on the bezel and a GPS antenna lead on the back, mapping powered by Garmin.
  • REZ - Rear-Seat Video Entertainment System (standard): Single-screen overhead/rear-seat DVD module mounted separately from the head unit; on Limited variants a dual-screen Blu-ray-capable variant was offered. Each video module wears its own chassis label and serial.

The Town & Country never received the Uconnect 8.4 RA3/RA4 platform - it stayed on the legacy MyGIG family right through to its 2016 final year.

Access the Serial on the Radio Display

Try the following for your 2014 Chrysler Town & Country:

The 2014 Chrysler Town & Country — Chrysler's premium minivan with leather-appointed interior and available wood trim — comes with the Uconnect 8.4" Classic (RA3). The Town & Country's center stack positions the 8.4" screen mid-dash with the climate controls underneath the screen.

Hold Climate Up, Climate Down, and Front Defrost simultaneously for 5 seconds (ignition ACC or ON). Dealer Mode opens. Go to: System Info → Radio Part Info → Serial Number.

Releasing the Radio Unit to Access the S/N on the Tag

If the serial number cannot be accessed through menu, use the hardware method.

Most Chrysler Town & Country factory radios include a label with the serial number printed on the casing.

The process:

  • Shut down the car.
  • Carefully remove surrounding dashboard trim.
  • Loosen screws holding the radio.
  • Pull forward to inspect the label.

If Dealer Mode is unavailable on the 2014 Chrysler Town & Country, the RA3 must be physically removed from the premium minivan dash.

  1. Pry off the bezel panel with a plastic pry tool. The Town & Country's premium interior trim is friction-clipped.
  2. Remove the four Phillips mounting screws.
  3. Pull the unit out to access the serial label on the top or side of the chassis.

Pulling Out the 2014 Town & Country Radio to Read the Serial

The 2014 Town & Country continues with the post-2011 one-piece dash, so the radio comes out cleanly with a bezel pry and four Phillips screws. The factory head units for this year are the RES base CD radio, the RBZ 430 MyGIG, the RHB 430N MyGIG with navigation, and the standard REZ rear-seat DVD module. The serial number lives on a white printed label on the chassis, so the unit must come out for the sticker to be read.

Safety Notice

  • Turn the ignition fully off, pull the key out of the cylinder, and let the vehicle sit for a moment so accessory circuits power down.
  • Disconnect the negative battery terminal at the post and wait several minutes so the SRS capacitors discharge.
  • Avoid all yellow-jacketed wiring and yellow connectors behind the dash - those carry airbag circuits and must not be probed or unplugged.
  • Use plastic trim tools instead of metal blades against the bezel so the soft-touch dash trim stays unmarked.

Tools You Will Need

  • A #2 Phillips screwdriver for the four screws that secure the radio chassis to the dash cage.
  • A plastic dash trim removal tool or wide nylon pry wedge for the centre bezel clips.
  • A small flat-blade trim tool as a backup for stubborn clips.
  • A soft cloth to lay over the centre console while you work, plus a phone camera to photograph connectors before unplugging them.

Removal Overview

  • Starting at one of the upper corners of the radio bezel, push the trim tool behind the panel and ease it outwards to release the spring clips.
  • Walk the trim tool around the perimeter so the bezel pops free a section at a time, then tilt it forward and unplug any switch harness on its back.
  • Set the bezel face-down on the cloth and locate the four Phillips screws around the radio face that hold the chassis to the dash cage.
  • Loosen and remove all four screws, then pull the radio outwards a few inches.
  • Disconnect the antenna lead and the rectangular multi-pin harnesses at the rear of the unit, and lift the radio clear of the dash.

Where the Serial Sits

  • Inspect the top, side, and rear of the metal chassis for a white printed label bearing a barcode.
  • The serial number is the longer alphanumeric string near or directly below the barcode - the Mopar part number on the same label (typically P05091 on RES or P0506x on RBZ/RHB) is a separate field.
  • The standard REZ rear-seat DVD module wears the same kind of printed label on its own case.

Tips

  • Photograph the label up close in good light and double-check ambiguous characters such as 0/O and 1/I before transcribing the serial.
  • On reassembly, reseat each plug fully so it clicks home and route the wiring so nothing is pinched against the dash cage.
Chrysler Town & Country 2014 radio serial number label location

Example: Chrysler Town & Country serial number label location

Common Serial Number Structures

Year Chrysler Town & Country RA3 serial patterns:

  • T00AM – Harman VP2 RA3 (standard on Town & Country)
  • T00BE – Continental version
  • TM9 – Earlier Harman production

Serial is 14 alphanumeric characters. Skip the part number (starts with P05064 or 68).

Typical Serial Number Formats for 2014 Town & Country Radios

The factory radios fitted to the 2014 Town & Country are legacy Mopar units rather than the later Uconnect 8.4 platform, so the prefix on the chassis label depends on which radio was specified and which supplier built it. Serials usually run as a continuous block of letters and digits with no dashes or spaces.

RBZ 430 MyGIG and RHB 430N MyGIG (Touchscreens)

  • These Mitsubishi-built MyGIG units typically print an alphanumeric serial on the case sticker.
  • Common Mopar/MyGIG prefixes seen on this generation include T00AM, T00BE, and TM9 alongside other T-style codes.
  • The Mopar part number printed beside the serial commonly starts with P0506 on these touchscreen heads.

RES (Single-Disc CD)

  • The base RES head unit usually carries a Mopar-style serial on the chassis sticker.
  • The accompanying Mopar part number is typically in the P05091xxxAx family.
  • Treat the printed label on the unit itself as the authoritative reference and copy each character exactly.

REZ Rear-Seat DVD Module

  • The standard REZ overhead DVD entertainment unit also wears a printed chassis label with its own serial.
  • If codes are needed for that module, transcribe its serial separately and avoid guessing unclear characters.

Reading the Label Correctly

  • Anything that begins with P is a part number and is not the serial.
  • Anything that starts with T is typically the serial - copy every character exactly as printed.
  • Watch the digit 0 versus the letter O, and capture every leading zero, since a single wrong character produces a wrong unlock code.

Troubleshooting Common Radio Problems - Town & Country 2014

If no code prompt appears, the lock hasn't fired. Force the prompt by briefly pulling the radio fuse, then reconnect and turn to ON.

On the Town & Country RA3 label: serial = 14 alphanumeric chars, starts with T00AM, T00BE, or TM9. Part number starts with P05064 or 68 — that's not the serial.

The Town & Country RA3 label has both serial and part number. Serial (use this): 14 chars, starts with T00AM, T00BE, or TM9. Part number (skip): starts with P05064 or 68.

Double-check the label carefully. Contact support for a free re-check if needed.

The Town & Country Uconnect RA3 uses touchscreen-only code entry. Touch each digit on the on-screen keypad. Auto-unlocks after the 4th digit. No physical buttons needed.

3 wrong entries lock the Town & Country RA3 for 60 minutes. Keep ignition in ON or ACC. Turning off restarts the timer.

What Caused the Radio to Lock?

The 2014 Chrysler Town & Country radio locks itself after power is cut. A premium minivan radio is just as vulnerable — any power interruption triggers the lock.

Most common cause: battery replacement or disconnect. Other causes:

  • Blown radio fuse
  • Buying the Town & Country used without a code
  • Battery disconnect for service
  • Battery drained from storage

Code comes from the radio serial number — not the VIN.

Get Your Chrysler Town & Country 2014 Radio Code Now