Find Honda CR-V 2017 Radio Code : Instant Unlock⚡

Radio showing LOCKED? Your Honda CR-V 2017 can be unlocked quickly using the radio serial number. Enter it in the form and use the steps below if you need guidance.

Codes are sent immediately.
In rare cases, Honda CR-V radio code delivery can take up to a day.

You only need your serial number from the radio.
It takes less than a minute.

We offer a full refund if the code doesn't work.
Just follow our simple verification steps.
Review our Refund Policy for complete terms.

Serial Number Patterns:

Your radio serial may start with: HBM, U1234L1234, 913A, 30006

Serial Number Examples:

HONDA:HBM23001513 (HONDA)
913A7271
U1234L1234
Dealer price $120 92% Off!
Our price: only $9.99
Safe Payment
Fast Delivery
277+ Reviews
See reviews →
Guaranteed refund if the code is invalid
Honda CR-V 2017 car photo
How to find Honda CR-V 2017 radio serial number

What Caused the Radio to Lock?

Honda's Display Audio system uses the same anti-theft design as earlier radios: losing battery power triggers a code request at next startup. This affects both the base radio and the Display Audio touchscreen.

  • Battery replacement — the usual culprit.
  • Battery disconnect during repairs — any work that interrupts battery power will re-engage the lock.
  • Completely dead battery — a drained battery has the same result.

Note: a number of higher-trim Display Audio models from this era might not use a traditional code-based lock — if the radio never prompted for a code after a battery change, it may use a different anti-theft method linked to the vehicle VIN.

Radio Serial Number Explained - Finding It on Your Honda

Very useful fact to know is that factory radios use a specific S/N to identify each unitindividually.

Your anti-theft system links the code directly to this serial.

Different from car-specific data such as VIN or registration info, it is not determined by the model or production year, so you'll be able to generate it even if you have a radio that you installed afterwards.

Depending on the manufacturer and radio installed in your Honda CR-V, the access method varies.

These are the most reliable ways to find it.

Factory radios fitted to the 2017 Honda CR-V

  1. Base 5-inch color LCD audio system on the LX trim, controlled by physical buttons and a volume knob, driving a 4-speaker layout with AM/FM, Bluetooth HandsFreeLink and a single USB input.
  2. 7-inch Display Audio touchscreen system on EX, EX-L and Touring trims, with capacitive buttons, swipe and pinch gestures, Bluetooth streaming, Pandora compatibility and SiriusXM on EX and above.
  3. EX-L Display Audio adds the 8-speaker premium audio package and HD Radio, while Touring layers in Honda Satellite-Linked Navigation with voice recognition built into the same 7-inch head unit.
  4. The 2017 launch units omit Apple CarPlay and Android Auto, which were not added to the 5th gen CR-V Display Audio until the 2018 model year refresh of the head unit software.

Before Removing the Radio, Try This Screen Method

The method for 2017 Honda CR-V is this:

The 2017 Honda CR-V may be equipped with Honda's Display Audio system (5" depending on trim) or a standard non-touchscreen radio. Either type support serial number display via the 1+6 button method:

  1. Turn ignition to ON. Wait for the radio to power up. The screen shows "CODE" when locked.
  2. Simultaneously press preset buttons 1 and 6 for approximately 3-5 seconds.
  3. The serial number shows in two halves (e.g., U3210 + L0482).

Also: On 2017 CR-V with the Display Audio touchscreen, navigate to Settings → System → Device Information – the serial may be listed there instead of the button combination.

Reading the serial on a 2017 CR-V factory radio

  1. Switch the ignition to ACC or ON but leave the audio unit powered off so the dash is awake without the radio playing.
  2. Press and hold preset buttons 1 and 6 at the same time on the audio unit's preset row.
  3. While still holding 1 and 6, press the radio power button to bring the unit up; on the LX 5-inch unit and most EX/EX-L Display Audio units this triggers the service screen used for the serial.
  4. Read the screen labelled U followed by four digits and record those characters, then wait for the display to alternate to the screen labelled L followed by four digits and record that half too.
  5. Concatenate the two halves in order to obtain the 8-character serial; the U and L are screen prefixes and are not entered into Honda's lookup tools.
  6. If the on-screen procedure does not produce a serial - which is more common on the navigation-equipped Touring head unit - the value can be read from the chassis label after the unit is removed, or pulled by a Honda dealer using the HDS scan tool.

Pulling Out the Radio Unit to See the S/N on the Tag

If the serial number cannot be accessed through menu, use the pull-out method.

Most Honda CR-V factory radios include a tag with the serial number printed on the casing.

Step-by-Step Approach:

  1. Power down the vehicle.
  2. Remove the trim surrounding the radio.
  3. Release the clips.
  4. Pull the unit outward to access the label.

The serial number is usually located near the barcode.

If none of these methods work on the 2017 Honda CR-V:

  1. Turn off the vehicle.
  2. Detach the center stack trim panel. The 2017 CR-V's integrated dashboard uses friction clips.
  3. On touchscreen trims: Unscrew the mounting screws (Phillips) securing the display module.
  4. On base trims: Remove the four screws holding the head unit.
  5. Ease the unit forward and find the serial on the sticker on the back or side.

Note: The Display Audio unit is larger and more integrated than the base radio. Be careful when extracting it.

Removing the radio on a 2017 CR-V to read the serial label

  1. Disconnect the negative battery cable first and wait several minutes for the SRS capacitors to discharge before touching the dash.
  2. Open the small storage cubby below the audio unit and remove any contents, then take out the two Phillips screws on the underside of the center trim piece that are accessible from inside the cubby.
  3. Starting at the lower edge near the cubby, gently pull the center trim panel rearward to release its retaining clips along the perimeter; work around the panel evenly so no clip is over-stressed.
  4. Tilt the trim panel out far enough to disconnect the harnesses on its rear, including any hazard switch and accessory connectors, then set the panel aside on a soft surface.
  5. Remove the screws or bolts now exposed around the audio unit bracket, supporting the head unit from underneath as the last fastener is freed so it does not drop.
  6. Slide the audio unit out of the dash opening, disconnect the antenna lead and the multi-pin harnesses on the rear, and read or photograph the chassis label on the side or top of the unit; the 8-character serial printed there should match the value reported by the on-screen procedure.
  7. Reverse the steps for reinstallation, making sure each clip seats with a soft click and that no wiring is pinched between trim panels.
Honda CR-V 2017 radio serial number label location

Example: Honda CR-V serial number label location

How Serial Numbers Usually Look on These CR-V Radios

Depending on the radio installed in the 2017 Honda CR-V:

  • U1234L5678 – Standard Honda OEM format
  • HBM#### – Found on Display Audio and nav-equipped units
  • 913A#### – Certain Alpine-manufactured radios

The 2017 CR-V may have: base CD radio (U/L format), Display Audio 5"/7" (HBM format), or navigation unit (HBM format). All use a 5-digit unlock code.

Important Make sure you read the serial number, not the part number (which starts with 39100, 39101, or similar Honda part coding).

What the 2017 CR-V radio serial usually looks like

  1. The serial returned by the on-screen procedure is typically 8 characters long and combines the four characters shown after U on screen one with the four shown after L on screen two.
  2. The U and L letters are display prefixes that label the upper and lower halves of the serial; they are not part of the value submitted to Honda.
  3. On most 5th gen CR-V factory units the serial is purely numeric, although some chassis labels carry a longer alphanumeric string that begins with a manufacturer prefix and should be ignored beyond the 8 matching characters.
  4. A representative format would read U1234 followed by L5678, corresponding to a stored serial of 12345678 for the lookup.
  5. If the printed label and the on-screen value disagree, the on-screen value is generally the one accepted by the official Honda radio code portal, with the chassis label kept as a fallback if the service screen cannot be triggered.

Final Step - Enter the Radio Code

Once the system gives you 2017 Honda CR-V anti-theft code from the serial, you're ready to reactivate the radio.

Many drivers hesitate at this stage because input methods can look different across radio versions, but it's usually easy.

When the radio shows CODE, it means the unit is waiting for the correct numbers.

Entering Process Explained

To input the code on the 2017 Honda CR-V:

  1. Ignition ON. Radio displays "CODE" or "ENTER CODE".
  2. Non-touchscreen models: Press preset buttons 1-5 to cycle to each digit, then hold button 6 to confirm.
  3. Display Audio touchscreen: An on-screen keypad may appear. Tap each digit and press "Enter" or "OK".

Lockout: Three wrong entries activate a 60-minute lockout. Leave ignition ON. Do not cycle the key or the timer resets.

Entering the unlock code on a 2017 CR-V radio

  1. Switch the ignition to ON and power the audio unit so the CODE or ENTER CODE prompt is shown on the 5-inch LX screen or the 7-inch Display Audio screen.
  2. On the LX 5-inch unit, use preset buttons 1 through 5 to set each digit of the 5-digit code in order, pressing each preset the number of times required for that digit.
  3. On the 7-inch Display Audio used by EX, EX-L and Touring, tap the on-screen number pad to enter each of the five digits and confirm with the on-screen ENTER soft key when the full code is shown.
  4. The radio should resume normal operation immediately if the code is correct; if it is wrong, repeat carefully because each error counts toward the lockout limit.
  5. If the prompt does not appear after a power-loss event, note that 5th gen CR-V Display Audio units in the US market are largely VIN-paired through Honda's anti-theft system and may re-authorize automatically when the unit comes back up in the same vehicle, in which case no code entry is needed.

Steps to Unlock Your 2017 Honda CR-V Radio

Vehicle radios use security codes dependent on the radio unit itself rather than the model or production year.

  • Our lookup service works by matching your Honda CR-V radio's serial number.
  • After entering the serial into the form above, the system identifies the radio family and retrieves the corresponding code.
  • Use the code to unlock the radio immediately.
  • The online process is quicker and more accessible than visiting the Honda dealer.

Fixing Common Code Entry Problems for 2017 CR-V

The Display Audio platform enforces the same 3-attempt lockout as earlier Honda radios. Recovery steps:

  1. Leave the ignition in ON or ACC — avoid turning it off.
  2. Wait out the full 60-minute period. The touchscreen might dim during this time — that's normal.
  3. After 60 minutes, the radio re-displays "CODE" and you can.

For touchscreen units, the lockout countdown runs in the background. Simply leave the vehicle running or the ignition on ACC until the timer expires.

For Display Audio-era Honda radios, a rejected code is typically caused by the serial was incorrectly noted. Either retrieval method can produce the correct serial — verify that the serial you submitted came from the radio unit and not from an online database.

After one failed entry, pause and reach out before trying again — another incorrect entry gets you one step closer to the 60-minute lockout. A free serial reverification can be done on request.

The Display Audio era covers radios using different serial formats depending on the trim level:

  • U####L#### — base CD radio serial (10 characters, two halves).
  • HBM#### — Display Audio 5"/7" and navigation modules.
  • 913A#### — certain Alpine OEM configurations.

Part numbers on the same label start with 39100 or 39101 — these are not serials. When in doubt, use the Settings → Device Information menu or the 1+6 button method to display the serial directly from the unit.

If the Display Audio screen comes on but goes straight to the home screen without any "CODE" display, consider these points:

  • Anti-theft may not have triggered — some battery changes skip the lock if done quickly enough.
  • Certain Display Audio units, the code prompt shows only on the audio portion of the screen, not the navigation display — wait a few seconds after startup.
  • Check the Settings → System → Device Information route; should the serial appear, the unit could still be functional without a code.

If none of these apply, checking the radio fuse is the next step — a failed fuse will stop the radio from showing any display at all.

Entry method depends on the exact radio variant in the 2014–2021 CR-V:

  • Non-touchscreen base radio: Use preset buttons 1–5 to scroll to each digit, then press and hold button 6 to confirm — same as older Honda platforms.
  • Display Audio 5" or 7" touchscreen: An on-screen numeric keypad is shown when the code prompt is active. Enter the digits and press OK or Enter on screen.

If the touchscreen is unresponsive, attempt the physical preset buttons — some units support either input method. Make sure the screen is fully powered on before attempting entry.

Get Your Honda CR-V 2017 Radio Code Now