2022 Chrysler 300 Radio Code: How to Get It?

Unlock your 2022 Chrysler 300 radio in just a few clicks. Simply enter the S/N to generate your code - no VIN required. Follow the full guide below if you need help finding or entering your code.

Delivery is instant in most Chrysler 300s.
Rare Chrysler cases may take up to 24 hours.

You'll get your money back if it fails.
A proof that the code failed may be required.
Check the Refund Policy page for more information.

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

T0MYD164822563 (T0MYD)
T00BE351823197 (T00BE)
TM9341100221 (TM9)
Chrysler 300 2022 car photo
How to find Chrysler 300 2022 radio serial number
Dealer price $120 92% Off!
Our price: only $19.99
Secure Payment
Get Code Instantly
262+ Reviews
See reviews →
Guaranteed refund if the code is invalid

Steps to Unlock Your 2022 Chrysler 300 Radio

To get the code, you'll take only 4 simple steps.

  1. Find your radio's serial - this is the only info required to generate the correct unlock code.
    Unlike dealership lookup, no VIN is needed.
  2. Enter the serial number into our generator above.
    Our system checks it against a database of supported units and automatically retrieves the matching anti-theft code.
  3. In most cases, the code appears instantly on the screen after payment and is also sent to your email , just in case.
    If manual verification is required (rare situations), you'll be notified before checkout.
  4. When you get it, just enter it into your radio to restore full functionality.

Serial Number Location Guide for Chrysler 300 2022

The starting step is writing down the radio serial number.

Most people assume the code depends on the Chrysler model or year, but actually, the unlock process depends on the unique radio unit's serial number.

The serial is the key used to calculate the correct unlock code.

This is even better, because if you have bought an aftermarket radio, the VIN or other vehicle-specific data wouldn't help.

Based on the radio version used, you may be able to retrieve the serial directly from the display or by looking at the label on the radio chassis.

2022 Chrysler 300 Factory Radio Options

The 2022 Chrysler 300 keeps the same Uconnect 4 line-up. Three head units across the trim range, separated by screen size and built-in navigation.

  • Uconnect 4 (UAG) - 7-inch non-NAV touchscreen. Standard on the entry 300 Touring trim. Visual ID: 7-inch display centred in the dash bezel opening; Apple CarPlay and Android Auto are supported, but there is no factory NAV app or Map tile on the home screen.
  • Uconnect 4C (UAS) - 8.4-inch non-NAV touchscreen. Common on 300S and Touring L when navigation is not optioned. Visual ID: large 8.4-inch screen filling the dash opening edge to edge, CarPlay and Android Auto present, but no Map/NAV tile.
  • Uconnect 4C NAV (UAQ) - 8.4-inch touchscreen with built-in GPS. Standard on 300C and 300S Premium, frequently optioned on lower trims. Visual ID: same 8.4-inch bezel and glass as UAS, but the home screen carries a dedicated NAV/Map tile and on-board maps work without a phone.

Quick test: 7-inch screen = UAG, 8.4-inch without a Map tile = UAS, 8.4-inch with a Map tile = UAQ.

View Your S/N on the Radio Display

These are the steps you need to follow for 2022 Chrysler 300:

The 2022 Chrysler 300 — the final generation of Chrysler's full-size rear-wheel-drive sedan — comes with the Uconnect 4C (RA4) with an 8.4" touchscreen. Dealer Mode works differently from older RA3 models: press the bottom-left and bottom-right corners of the physical screen bezel frame simultaneously for 5 seconds (ignition ACC or ON). Dealer Mode opens. Go to: System Info → Radio Part Info → Serial Number.

Access the S/N via the Radio Screen

The 2022 Chrysler 300 continues with the Uconnect 4 line-up - 8.4-inch UAQ NAV, 8.4-inch UAS non-NAV, and the smaller 7-inch UAG. The radio serial number can usually be read on screen via the hidden dealer/diagnostic menu, although newer Uconnect software builds have tightened dealer-mode access on some cars.

Uconnect 4C 8.4 (UAQ / UAS)

  • Switch the ignition to RUN/ACC and wait for the Uconnect interface to finish booting.
  • Press and hold the driver-side temperature UP, the driver-side temperature DOWN, and the front DEFROST buttons together for roughly 5-10 seconds.
  • If the climate-button shortcut does nothing on a software-updated unit, press and hold the bottom-left and bottom-right corners of the screen at the same time for about 5-10 seconds.
  • Browse to the radio/system info section to view the 14-character serial number on screen.
  • Photograph the screen before transcribing the characters.

Uconnect 4 7-inch (UAG)

  • Place the ignition in RUN/ACC and let the screen finish loading.
  • Press and hold both temperature UP and temperature DOWN buttons together for around 5-10 seconds to enter the engineering menu.
  • Open System Info / Target Main Data to view the serial number on screen.
  • Take a photo of the display so the characters can be copied accurately.

Releasing the Radio Unit to Access the S/N on the Tag

If the serial number cannot be accessed through menu, use the pull-out method.

Most Chrysler 300 OEM radios include a tag with the serial number printed on the chassis.

Step-by-Step:

  1. Turn off the vehicle.
  2. Lift the dashboard frame surrounding the radio.
  3. Release the fasteners.
  4. Move the unit outward to access the label.

The serial number is usually located near the barcode.

If Dealer Mode is unavailable on the 2022 Chrysler 300, remove the RA4 unit from the 300's center stack. The bezel corner press can be blocked after OTA firmware updates.

  1. Remove the bezel panel with a plastic trim tool.
  2. Remove the 4 Torx T20 mounting screws.
  3. Slide the unit out to read the serial label on the top or side of the chassis.

Locate Serial on Chrysler 300's Radio Chassis

If dealer mode has been restricted on the 2022 Chrysler 300 by a Uconnect software update, the printed chassis label remains the next reliable source. The Uconnect 4 head unit on the LD-platform 300 sits in a centre stack closely tied to the climate cluster, so work slowly and methodically.

  • Safety first: turn the ignition off, take out the key, disconnect the negative battery terminal, and wait a few minutes before touching wiring; never disturb the yellow airbag/SRS connectors and use plastic trim tools to avoid shorts and broken clips.
  • Tools you will need: plastic trim removal kit (a Mopar C-4755 trim stick or equivalent), Phillips and small Torx bit set, 7mm/10mm socket set, flashlight.
  • Pop the centre instrument panel bezel free using a plastic pry tool starting at the lower edge and working up the sides; on the LD 300 this bezel also carries the A/C-heater control and clock connectors.
  • Unclip the climate and clock harnesses at the rear of the bezel before setting the trim aside on a clean cloth.
  • Remove the mounting fasteners (typically four screws, two upper and two lower) that secure the radio cage to the dash support bracket.
  • Slide the radio rearward and disconnect the antenna lead and the multi-pin power/data harness on the back.
  • The serial number sits on a printed barcode/sticker label on the top or side of the radio chassis, next to the part number and supplier markings.
  • Photograph the label and double-check ambiguous characters such as 0/O, 1/I and B/8 before submitting the serial. If you are not comfortable working around airbag wiring or the integrated climate cluster, have a professional installer take the unit out for you.
Chrysler 300 2022 radio serial number label location

Example: Chrysler 300 serial number label location

Typical Serial Number Formats for 2022 300 Radios

Year Chrysler 300 RA4 serial formats:

  • T00AM – Harman RA4 Uconnect 4C (primary format on the 300)
  • T00BE – Continental variant

Serial is 14 alphanumeric characters. Ignore the part number (starts with P or 68).

S/N Patterns and Prefixes

The factory radios on the 2022 Chrysler 300 follow the standard Mopar/Uconnect serial style. The exact prefix depends on the Uconnect tier shipped with the car and the supplier (Visteon, Continental, Harman or Panasonic) that built the unit.

Uconnect 4C 8.4 (UAQ / UAS)

  • Typically printed as a 14-character alphanumeric string on the chassis label.
  • Commonly begins with T - frequent prefixes include T00AM, TM9 and TQ1 - or with A2C on Continental-built variants.
  • Usually a continuous run of letters and digits with no dashes or spaces.

Uconnect 4 7-inch (UAG)

  • Usually carries a Mopar/Harman or Panasonic-style serial on the chassis sticker, so the label on the unit itself is the authoritative reference.
  • Copy the serial exactly as printed and avoid guessing characters that look unclear.

Entering Your Unlock Code

Once you have the serial number and generated the unlock code, the next part is entering it into your radio.

Chrysler factory radios display a locked screen when ready for input.

The process is simple, but button layouts and confirmation methods may change depending on the radio version installed in your 300.

Step-by-Step Code Input Guide

To unlock the 2022 Chrysler 300 Uconnect 4C:

  1. Turn ignition to ON. Screen shows "ENTER CODE".
  2. Enter each digit of your 4-digit code on the touchscreen keypad.
  3. Radio auto-confirms after the 4th digit. No confirm button needed.

3 wrong attempts trigger a 60-minute lockout. Keep ignition ON. Switching off restarts the timer.

Step-by-Step Correct Entering Process

Once the unlock code has been retrieved for a 2022 Chrysler 300 Uconnect head unit, it can be entered directly at the dash - no scan tool or dealer visit required.

  • Limited attempts: Mopar/Uconnect head units only accept three incorrect tries before the radio enters a WAIT state, so confirm every digit before pressing it.
  • Place the ignition in RUN/ACC so the radio powers up but the engine stays off.
  • Wait for the display to show CODE, Please enter Anti-Theft Code, or a similar prompt.
  • On the Uconnect 4C 8.4 (UAQ/UAS), tap the on-screen number pad to enter each digit and confirm with the OK/Enter touch button.
  • On the Uconnect 4 7-inch (UAG), press the numbered preset buttons in sequence (preset 1 = first digit, preset 2 = second, etc.) - or use the on-screen keypad when the unit prompts for it.
  • If WAIT appears after wrong attempts, leave the radio powered with the ignition in RUN for a continuous 30 minutes (the vehicle may be driven during this time) before trying the correct code again.

Fixing Common Code Entry Problems for 2022 300

3 wrong entries lock the 300 RA4 for 60 minutes. Keep ignition in ON or ACC. Cutting power restarts the timer from zero.

The radio label: serial = 14 alphanumeric chars starting with T00AM or T00BE. Part number starts with P or 68 — skip this.

The 300 RA4 label carries both serial and part number. Serial: 14 chars starting with T00AM or T00BE. Part number (skip): starts with P or 68.

If Dealer Mode was used, verify against the physical label. Screen glare on the 8.4" can cause misreads. Contact support for a free re-check if needed.

If no code prompt appears, the lock hasn't activated. Trigger it: briefly disconnect the battery, reconnect, turn ignition to ON.

The 300 Uconnect 4C uses touchscreen-only code entry. Tap each digit directly on the on-screen keypad. No physical buttons needed. Auto-unlocks after the 4th digit.

What Caused the Radio to Lock?

The 2022 Chrysler 300 RA4 locks automatically after battery is disconnected. It's a factory theft deterrent — a disconnected radio won't work without the code.

Typical cause: battery replacement or disconnect. Other causes:

  • Failed fuse after electrical work
  • Buying the 300 pre-owned without a known code
  • Battery disconnect for service
  • Battery drained from not driving

Code is derived from the radio serial number — not the VIN.

Get Your Chrysler 300 2022 Radio Code Now