Find Chrysler Voyager 2014 Radio Code : Fast&Easy⚡

Unlock your 2014 Chrysler Voyager radio in just a few clicks. Simply enter the S/N to generate your code - no dealer visit required. Follow the full guide below if you need help finding or entering your code.

You'll get your money back if it fails.
Video proof may be required.
See our Refund Policy for full details.

Delivery is instant in most Chrysler Voyagers.
Some Chrysler cases require manual processing (24h).

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

T0MYD164822563 (T0MYD)
T00BE351823197 (T00BE)
TM9341100221 (TM9)
Chrysler Voyager 2014 car photo
How to find Chrysler Voyager 2014 radio serial number
Dealer price $120 92% Off!
Our price: only $19.99
Secure Payment
Get Code Instantly
267+ Reviews
See reviews →
Guaranteed refund if the code is invalid

How to Get Your 2014 Chrysler Voyager Radio Code

Car radios use anti-theft codes dependent on the radio unit itself rather than the model or production year.

  • The generator identifies your Chrysler radio via serial-based verification.
  • Once the serial number is submitted, the system identifies the radio unit and retrieves the corresponding code.
  • Use the code to unlock the radio immediately.
  • The online process is quicker and more accessible than visiting the Chrysler dealer.

Radio Serial Number Explained - Finding It on Your Chrysler

The first step is to locate the radio's serial number.

Depending on the radio unit fitted in your 2014 Voyager, the serial can usually be accessed either through the display menu or by checking the label on the radio itself.

Below are the most common methods to identify your serial the right way.

Factory Radios on the 2014 Chrysler Voyager

For 2014 the export Voyager - sold as Lancia Voyager in continental Europe and Chrysler Voyager in Canada / the UK / other markets - still ran the same RT minivan trio of legacy Mopar head units. No Uconnect 8.4. Identify yours below:

  1. RES (Media Center 130) - base AM/FM/CD radio. Non-touchscreen unit with a small one-line monochrome display, hard preset buttons across the bottom and large rotary knobs for tune and volume. No NAV button, no large screen, no factory Bluetooth.
  2. RBZ (Media Center 430 MyGIG) - 6.5-inch touchscreen, no nav. Mitsubishi-built color touchscreen with a glossy black bezel and hard keys for Radio, Media, Controls, More and Phone flanking the screen. There is no NAV soft key on the home menu because the unit has no navigation hardware.
  3. RHB (Media Center 430N MyGIG) - 6.5-inch touchscreen with Garmin nav. Externally identical to the RBZ - same Mitsubishi-built screen, same bezel, same hard buttons. Tell it apart on screen: a NAV soft key on the home menu, a Garmin splash logo at boot, and a 28GB internal hard drive for stored music.
  4. RHW - MyGIG 430N export navigation. European-market high-line navigation MyGIG fitted to many Lancia Voyager builds; outwardly similar to RHB but with European mapping and market-specific tuners.
  5. Optional rear-seat DVD entertainment. A separate 9-inch flip-down headliner screen with its own DVD player in the lower dash and wireless IR headphones; orderable independently of which head unit was specified.

Fast Serial Lookup Using Radio Controls

These are the steps you should follow for 2014 Chrysler Voyager:

The 2014 Chrysler Voyager — Chrysler's value minivan — features the Uconnect 8.4" Classic (RA3). Despite being the lower-trim minivan, the RA3 Dealer Mode is available.

Press and hold Climate Up, Climate Down, and Front Defrost simultaneously for 5 seconds with ignition in ACC or ON. Dealer Mode opens. Go to: System Info → Radio Part Info → Serial Number.

Access the Serial by Pulling Out the Radio

If the serial does not appear on screen, the next step is checking the radio itself.

Many Chrysler radios require physical access to the serial sticker attached to the unit.

Common approach:

  1. Start by completely turning off the engine - pull the key out.
  2. Then lift the trim panel.
  3. Next, unscrew the mounting points and slide the radio forward.
  4. Look for a barcode label showing the serial number.

If Dealer Mode is unavailable on the 2014 Chrysler Voyager, remove the RA3 from the Voyager's practical center stack.

  1. Pry off the center stack trim with a plastic trim tool.
  2. Remove the four Torx T20 mounting screws.
  3. Pull the unit forward to read the serial label on the side or back of the radio chassis.

Locate Serial on Voyager's Radio Chassis

The factory radios fitted to the 2014 Voyager - typically the RES single-CD head unit, the RBZ MyGIG 430 (6.5-inch touchscreen), the RHB / RHW MyGIG 430N (6.5-inch touchscreen with navigation) and the optional REZ rear-seat DVD entertainment module - all carry their serial number on a printed chassis label. Because these legacy units do not expose the serial through the screen, the head unit needs to come out so the sticker on the case can be read.

  1. Safety first: switch the ignition off, remove the key, disconnect the negative battery terminal, and wait several minutes before touching wiring; never disturb the yellow airbag/SRS connectors and use plastic trim tools so nothing shorts or breaks.
  2. Tools you will need: plastic trim removal kit, Phillips screwdriver, small Torx bit set, flashlight, and a 7 mm socket on hand if any retaining bolts need backing out further into the dash.
  3. Ease the centre dash bezel forward at the lower edge using a plastic trim tool and work up the sides; on the RT minivan dash it is held in by four friction clips with no visible screws on the bezel itself.
  4. Once the four clips release, set the bezel aside on a soft cloth - on this body it does not need to be unplugged from any harness to do the job.
  5. Remove the four screws securing the radio chassis to the dash bracket.
  6. Slide the radio forward and disconnect the antenna lead and the multi-pin power/data harnesses on the rear of the unit.
  7. The serial number is printed on a barcode/sticker label on the top or side of the radio chassis, alongside the part number and Mopar/supplier markings; the optional REZ rear-seat DVD module wears the same kind of label on its own case.
  8. Photograph the label up close in good light and double-check ambiguous characters such as 0/O and 1/I before submitting the serial.
Chrysler Voyager 2014 radio serial number label location

Example: Chrysler Voyager serial number label location

What a Valid Serial Number Looks Like

Year Chrysler Voyager RA3 serial patterns:

  • T00AM – Harman VP2 RA3 (most common on Voyager)
  • T00BE – Continental variant
  • TM9 – Earlier Harman production

Serial is 14 alphanumeric characters. Ignore the part number (starts with P05064 or 68).

Typical Serial Number Formats for 2014 Voyager Radios

The factory radios fitted to the 2014 Voyager are legacy Mopar head units rather than the later Uconnect 8.4 platform, so the prefix on the chassis label varies with which radio was specified and which supplier built it.

RBZ MyGIG 430 and RHB / RHW MyGIG 430N

  1. These Mitsubishi-built MyGIG units typically print an alphanumeric serial on the case sticker.
  2. Common Mopar/MyGIG prefixes seen on this generation include TM9 alongside other T-style codes.
  3. The serial usually runs as a continuous block of letters and digits with no dashes or spaces.

RES (single-CD)

  1. The base RES head unit usually carries a Mopar-style serial on a chassis sticker.
  2. Treat the printed label on the unit itself as the authoritative reference and copy each character exactly.

REZ rear-seat DVD module

  1. The optional REZ overhead DVD entertainment unit also wears a printed chassis label with its own serial.
  2. If codes are needed for that module, transcribe its serial separately and avoid guessing unclear characters.

Got the Code? Here's How to Enter It

After receiving 2014 Chrysler Voyager radio code from the S/N, you're ready to reactivate the radio.

Some drivers get stuck at this stage because input methods can look different across radio versions, but it's usually quick.

When the radio shows ENTER CODE, it means the unit is waiting for the correct numbers.

Detailed Input Instructions for Voyager 2014

To enter the code on the 2014 Chrysler Voyager Uconnect 8.4":

  1. Turn ignition to ON. Screen displays "ENTER CODE".
  2. Tap each digit of your 4-digit code on the on-screen keypad.
  3. Radio unlocks after the 4th digit. No confirm button needed.

3 wrong entries trigger a 60-minute lockout. Keep ignition ON. Switching off restarts the timer.

Step-by-Step Code Input Guide

Once the unlock code has been retrieved for a 2014 Voyager radio, it can be entered straight at the head unit - no scan tool or dealer visit is required.

  1. Limited attempts: Mopar head units only accept a small number of incorrect tries (commonly three) before going into a long lockout/WAIT state, so verify each digit before pressing it.
  2. Place the ignition in RUN/ACC so the radio powers up while the engine stays off.
  3. Wait for the display to show CODE, Enter Anti-Theft Code, or a similar prompt.
  4. On the RBZ/RHB/RHW MyGIG (6.5-inch) units, key in the digits using the on-screen number pad; on the base RES head unit, press the numbered preset buttons (1-6) in sequence.
  5. Confirm the entry with the on-screen OK/Enter button on the MyGIG units, or with the tune/menu knob (or labelled enter button) on the RES.
  6. If WAIT or a similar timeout appears after the failed-attempt limit is reached, leave the radio powered with the ignition in RUN for a continuous 30 minutes before trying the correct code again.

Fixing Common Code Entry Problems for 2014 Voyager

The Voyager RA3 label shows both serial and part number. Serial: 14 chars, starts with T00AM, T00BE, or TM9. Part number (skip): starts with P05064 or 68.

Double-check each character. Contact support for a free re-check if needed.

3 wrong entries lock the Voyager RA3 for 60 minutes. Keep ignition in ON or ACC. Cutting power restarts the timer.

The Voyager Uconnect RA3 uses touchscreen-only code entry. Touch each digit on the on-screen keypad. Auto-unlocks after the 4th digit. No physical buttons needed.

The radio label: serial = 14 alphanumeric chars, starts with T00AM, T00BE, or TM9. Part number starts with P05064 or 68 — skip this.

If the Voyager radio shows the home screen, the lock hasn't activated. Force the prompt by briefly disconnecting the battery, then reconnect and turn ignition to ON.

Why Is the Radio Asking for a Code?

The 2014 Chrysler Voyager radio self-locks whenever the battery is disconnected. Even the value-tier Voyager uses the same anti-theft system.

Most common cause: battery replacement or disconnect. Other causes:

  • Blown radio fuse
  • Buying the Voyager second-hand without a code
  • Battery disconnect during repairs
  • Battery drained from sitting unused

Code comes from the radio serial number — not the VIN.

Get Your Chrysler Voyager 2014 Radio Code Now