2020 Chrysler Voyager Radio Code: Get It Back Instantly

Unlock your 2020 Chrysler Voyager radio in just a few clicks. Simply enter the serial number to generate your code - no dealer visit required. Follow the full guide below if you need help finding or entering your code.

We offer a full refund if the code doesn't work.
Verification is quick and easy.
Review our Refund Policy for complete terms.

Delivery is instant in most Chrysler Voyagers.
In rare cases, Chrysler Voyager radio code delivery can take up to a day.

You only need your serial number from the radio.
No documents required.

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

T0MYD164822563 (T0MYD)
T00BE351823197 (T00BE)
TM9341100221 (TM9)
Dealer price $120 92% Off!
Our price: only $19.99
Secure Payment
Get Code Instantly
268+ Reviews
See reviews →
Guaranteed refund if the code is invalid
Chrysler Voyager 2020 car photo
How to find Chrysler Voyager 2020 radio serial number

How to Unlock a Chrysler Voyager Radio After Power Loss

Vehicle radios use anti-theft codes tied to the radio unit itself instead of the model or production year.

  • The system uses the Voyager's radio serial to retrieve the unlock code.
  • After entering the serial into the form above, the system identifies the radio unit and retrieves the corresponding code.
  • You can then enter the code directly into your Chrysler radio.
  • The online process is quicker and more accessible than visiting the Chrysler dealer.

Entering the Radio Security Code

Now that you've found the S/N and received the unlock code, the final part is entering it into your radio.

Chrysler factory radios display a ENTER CODE message when ready for input.

The process is simple, but button layouts and confirmation methods may vary depending on the radio version installed in your Voyager.

Detailed Entering Instructions for Voyager 2020

To enter the code on the 2020 Chrysler Voyager Uconnect 8.4":

  1. Turn ignition to ON. Screen shows "ENTER CODE".
  2. Enter each digit of your 4-digit code on the on-screen keypad.
  3. Radio unlocks after the 4th digit. No confirm button needed.

3 wrong entries trigger a 60-minute lockout. Keep ignition ON. Switching off restarts the timer.

Step-by-Step Code Input Guide

Once the unlock code has been retrieved for a 2020 Voyager radio, it can be entered straight at the head unit - no scan tool or dealer visit is required.

  1. Limited attempts: Uconnect head units only accept a small number of incorrect tries (commonly three) before going into a long lockout/WAIT state, so verify each digit before pressing it.
  2. Place the ignition in RUN/ACC (press the START/STOP button without your foot on the brake) so the radio powers up while the engine stays off.
  3. Wait for the display to show CODE, Enter Anti-Theft Code, or a similar prompt on the Uconnect 4 (UAG) 7-inch screen.
  4. Key in the four digits using the on-screen number pad on the touchscreen.
  5. Confirm the entry with the on-screen OK/Enter button.
  6. If WAIT or a similar timeout appears after the failed-attempt limit is reached, leave the radio powered with the ignition in RUN for a continuous 30 minutes before trying the correct code again.

Finding the Radio S/N for Chrysler

The first part is to find and write down the radio's serial number.

Depending on the radio unit fitted in your 2020 Voyager, the serial can usually be found either through the screen menu or by pulling the unit out and checking the label on the radio itself.

Below are the most common methods to identify your serial quickly.

Identify Your 2020 Voyager's Factory Radio

For 2020 the Voyager nameplate was reborn in the United States as a value/fleet variant of the all-new Pacifica platform - this is the RU minivan, an entirely different vehicle from the 2011-2019 RT export Voyager. Stellantis split the entry-level L and LX trims off the Pacifica lineup and rebadged them as Chrysler Voyager, with an additional fleet-only LXi model. The infotainment hardware comes straight from the Pacifica:

  1. Uconnect 4 (UAG) - 7-inch touchscreen, standard. The standard radio across L, LX and LXi trims. Glossy black 7-inch capacitive touchscreen mounted in the centre stack with hard keys flanking the display, integrated Apple CarPlay and Android Auto, Bluetooth streaming and SiriusXM (where equipped). According to the Cars.com 2020 Chrysler Voyager listing and the Stellantis 2020 Voyager press materials, both L and LX come standard with this 7-inch Uconnect 4 head unit - there is no 5-inch option on the 2020 Voyager.
  2. SiriusXM-equipped variants. The LX trim adds standard SiriusXM (one-year subscription); the underlying head unit is still the Uconnect 4 UAG. Higher-line Uconnect 8.4 (UAQ/UAV) head units were Pacifica-only for 2020 and were not factory-fitted to Voyager trims.
  3. Active Noise Cancellation and 6 speakers. All 2020 Voyager trims share a six-speaker audio system with Active Noise Cancellation and a 3.5-inch driver information display in the cluster.

View the Serial Number via the Radio Display

Try the following for your 2020 Chrysler Voyager:

The 2020 Chrysler Voyager — the entry-level Chrysler minivan — is fitted with the Uconnect 8.4" Classic (RA3). Despite being the lower-trim minivan, the RA3 Dealer Mode is supported.

Press and hold Climate Up, Climate Down, and Front Defrost simultaneously for 5 seconds with ignition in ACC or ON. Dealer Mode opens. Navigate to: System Info → Radio Part Info → Serial Number.

Manufacturer Label Inspection

If the serial number cannot be accessed on-screen, use the pull-out method.

Most Chrysler Voyager original radios include a tag with the serial number printed on the chassis.

Step-by-Step:

  1. Power down the vehicle.
  2. Detach the trim surrounding the radio.
  3. Release the fasteners.
  4. Move the unit forward to access the label.

The serial number is usually located near the barcode.

If Dealer Mode is unavailable on the 2020 Chrysler Voyager, remove the RA3 from the Voyager's practical center stack.

  1. Remove the bezel panel with a plastic trim tool.
  2. Remove the 4 Torx T20 mounting screws.
  3. Slide the unit forward to read the serial label on the top or side of the radio chassis.

Locate Serial on Voyager's Radio Chassis

The 2020 Voyager is the Pacifica-based RU minivan, and the standard Uconnect 4 (UAG) 7-inch head unit is mounted in the centre stack of the Pacifica/Voyager dash. There is no documented on-screen serial menu for this head unit on the Voyager, so to read the chassis label the radio needs to come out.

  1. Safety first: switch the ignition off, remove the key fob from the cabin, disconnect the negative battery terminal, and wait several minutes before touching wiring; avoid the yellow airbag/SRS connectors entirely and use plastic trim tools so nothing shorts or breaks.
  2. Tools you will need: plastic trim removal kit, Phillips screwdriver, small Torx bit set, flashlight, and a 7 mm socket on hand for any deeper retaining bolts.
  3. Carefully release the trim panel surrounding the touchscreen using a plastic pry tool, working from the lower edge upward; on the Pacifica/Voyager dash the screen surround is held in by friction clips.
  4. With the surround released, set the panel on a soft cloth and unplug any harnesses (such as for accessory switches) only if they prevent the panel from moving aside.
  5. Remove the screws securing the radio chassis to the dash bracket - typically four mounting screws on this body.
  6. Slide the radio forward and disconnect the antenna lead and the multi-pin power/data harnesses at the rear.
  7. The serial number is printed on a barcode/sticker label on the top, side or rear of the radio chassis, alongside the part number and supplier markings.
  8. Photograph the label up close in good light and double-check ambiguous characters such as 0/O and 1/I before submitting the serial.
Chrysler Voyager 2020 radio serial number label location

Example: Chrysler Voyager serial number label location

Typical Serial Number Formats for 2020 Voyager Radios

Year Chrysler Voyager RA3 serial patterns:

  • T00AM – Harman VP2 RA3 (most common on Voyager)
  • T00BE – Continental version
  • TM9 – Earlier Harman production

Serial is 14 alphanumeric characters. Ignore the part number (starts with P05064 or 68).

Typical Serial Number Formats for 2020 Voyager Radios

The 2020 Voyager (RU/Pacifica-based) uses the Uconnect 4 (UAG) 7-inch head unit, which is a different supplier and hardware family from the legacy MyGIG radios fitted to the 2011-2019 RT Voyager. The prefix on the chassis label depends on which supplier built the unit and which production run it came from.

Uconnect 4 (UAG) 7-inch head unit

  1. The chassis label on the head unit carries an alphanumeric serial alongside the Mopar part number and supplier markings.
  2. Treat the printed label on the unit itself as the authoritative reference and copy each character exactly - the prefix scheme on Uconnect 4 hardware is not the same as the older MyGIG TM9 family.
  3. The serial typically runs as a continuous block of letters and digits with no dashes or spaces.

General guidance

  1. Avoid guessing unclear characters - photograph the label and zoom in if needed.
  2. If you cannot read the serial cleanly, do not submit a partial or improvised value.

Why Did the Radio Lock and Ask for a Code?

The 2020 Chrysler Voyager radio locks automatically whenever the battery is disconnected. Even the value-tier Voyager uses the same anti-theft system.

Typical trigger: battery replacement or disconnect. Other causes:

  • Failed radio fuse
  • Buying the Voyager used without a code
  • Battery disconnect during repairs
  • Battery dead from long storage

Code is derived from the radio serial number — not the VIN.

Fixing Common Code Entry Problems for 2020 Voyager

The Voyager RA3 label shows both serial and part number. Serial: 14 chars, starts with T00AM, T00BE, or TM9. Part number (skip): starts with P05064 or 68.

Double-check each character. Contact support for a free re-check if needed.

3 wrong entries lock the Voyager RA3 for 60 minutes. Keep ignition in ON or ACC. Turning off restarts the timer.

If no code prompt appears, the lock hasn't activated. Force the prompt by briefly disconnecting the battery, then reconnect and turn ignition to ON.

The Voyager Uconnect RA3 uses touchscreen-only code entry. Touch each digit on the on-screen keypad. Auto-unlocks after the 4th digit. No physical buttons needed.

The radio label: serial = 14 alphanumeric chars, starts with T00AM, T00BE, or TM9. Part number starts with P05064 or 68 — skip this.

Get Your Chrysler Voyager 2020 Radio Code Now