How to Get Your 2022 Chrysler Voyager Radio Code
- Instead of contacting Chrysler dealer or searching forums you can generate the code online using the radio S/N.
- First locate your radio's serial. It is always present on the unit itself, and in some cases it can be visible on the Voyager's display.
- Enter it into the generator above, and the system will generate the correct 2022 Voyager unlock code.
- After receiving your code, type it in using Voyager's radio controls to unlock the system fully.
- The entire process takes only a few minutes and requires no VIN, documents, or technical knowledge.
How to Enter the Radio Code
After locating the S/N and received the unlock code, the final step is entering it into your radio.
Chrysler OEM units display a CODE prompt when ready for input.
The process is straightforward, but button layouts and confirmation methods may differ slightly depending on the radio version installed in your Voyager.
Step-by-Step - The Correct Way to Enter It
To input the unlock code on your Uconnect radio:
- When the radio is locked, the screen will display "ENTER CODE" or show four dashes (----).
- Use the on-screen keypad (touchscreen models) or the preset buttons (non-touchscreen models) to enter each digit of your 4-digit code.
- After entering all 4 digits, the radio will unlock automatically – no need to press a confirm button.
Tip: Ensure you enter the code carefully. Three incorrect attempts will trigger a temporary lockout.
Older non-touchscreen Chrysler radios – MODE + SCAN priming
Pre-touchscreen head units (REF, REN, RBZ era fitted to 2007 to 2012 Chrysler 200, 300, PT Cruiser, Town and Country, and Sebring) use a different entry path:
- Turn the radio on with the ignition in ACC or ON. The display reads CODE.
- Press and hold MODE and SCAN together until the display shows 0000.
- Use presets 1, 2, 3, 4 to cycle each of the four digits in turn (preset 1 advances the first digit, preset 2 the second, and so on).
- When all four digits match your code, press SEEK to confirm. The radio unlocks and returns to normal play mode.
Can't Find Your Unit's Serial Number? Follow These Steps for Chrysler Voyager 2022
Very important thing to know is that factory radios use a unique serial number to identify each unit.
The security system links the code directly to this serial.
Unlike vehicle-specific data such as VIN or registration information, it is not determined by the model or production year, so you'll be able to retrieve it even if you have a radio that you installed afterwards.
Depending on the maker and radio installed in your Chrysler Voyager, the retrieval method is different.
Here are the best ways to find it.
View Your Serial via the Radio Screen
These are the steps you need to follow for 2022 Chrysler Voyager:
The Chrysler Voyager was reintroduced in 2020 as the entry-level minivan in the lineup — essentially the Pacifica with fewer features and a lower price. It rides on the same platform and uses Uconnect 8.4" NEW, which means the bezel-edge method works just like on the Pacifica.
Step 1: Turn ignition to ACC or ON.
Step 2: Press the bottom-left and bottom-right edges of the physical screen bezel frame at the same time. Hold until Dealer Mode appears. You must press the plastic trim border — not the touchscreen glass itself.
Step 3: Navigate System Info → Radio Part Info → Serial Number.
The serial is a 14-character alphanumeric code (e.g. T00AM394958584). Because the Voyager is the value-trim sibling of the Pacifica, no features are different that would affect this method.
Taking Out the Unit to Access the S/N on the Tag
If the serial number cannot be accessed on-screen, use the removal method.
Most Chrysler Voyager OEM radios include a label with the serial number printed on the housing.
Step-by-Step Approach:
- Power down the vehicle.
- Lift the dashboard frame surrounding the radio.
- Unscrew the fasteners.
- Slide the unit slightly out to access the label.
The serial number is usually located near the barcode.
Physical Radio Removal for Chrysler Voyager
Chrysler Voyager (2020-2024) is essentially a rebadged Pacifica with similar Uconnect system.
Example: Chrysler Voyager serial number label location
These are the Common Serial Formats
Your Chrysler Voyager 2022 radio serial number may start with:
T00AMT00BETM9T0MYDA2CTQNTVPQNT0071T00AD
Fixing Common Code Entry Problems for 2022 Voyager
Not every Chrysler head unit shows the modern touchscreen ENTER CODE keypad. Older REF, REN, RBZ, and base radios surface the lock state through plain display words. Match what you find on your screen to know which path to follow:
- CODE – The radio is asking for the 4-digit unlock code right now. Use the MODE + SCAN priming method described in the code entry section to enter it via presets 1 to 4.
- WAIT – You have entered three wrong codes already and the radio is in a 30 to 60 minute timed lockout. Leave ignition ON; turning the key off restarts the timer.
- SAFE – Less common on Chrysler, more common on older Stellantis-platform Fiat-sourced radios fitted to some PT Cruiser and Sebring trims, but still appears. Same meaning as CODE – the radio expects a 4-digit unlock code via the preset-button method.
If your screen shows none of these words and the radio is simply dark or stuck on a Stellantis logo, the head unit is not in a lock state – it is in a different fault. Contact us with a photo of what you see and we will confirm whether this is a code issue or a hardware repair path.
Check:
- radio serial accuracy
- digit sequence
- correct confirmation button
Common mistakes:
- part number vs serial
- extra spaces or missing characters.
Avoid hardware model numbers or part numbers.
Some radios require:
- holding the final digit
- pressing preset.
LOCK mode activates after a few incorrect entries.
Keep:
- power supply stable
- ignition ON
- no button pressing during wait period.