Understanding the Radio Serial Number and How to Locate It on 2024 Voyager
Very important thing to know is that factory radios use a specific serial number to identify each unitindividually.
Your anti-theft system links the code directly to the serial.
Different from car-specific data such as VIN or registration info, it is not determined by the model or production year, so you'll be able to get it even if you have an aftermarket radio.
Depending on the maker and radio installed in your Chrysler Voyager, the retrieval method is different.
These are the best ways to find it.
Check the Display First - Serial Retrieval Without Tools
These are the steps you should follow for 2024 Chrysler Voyager:
The Chrysler Voyager was reintroduced in 2020 as the entry-level minivan in the lineup — essentially the Pacifica with fewer features and a lower price. It rides on the same platform and uses Uconnect 8.4" NEW, which means the bezel-edge method works just like on the Pacifica.
Step 1: Turn ignition to ACC or ON.
Step 2: Press the bottom-left and bottom-right edges of the physical screen bezel frame at the same time. Hold until Dealer Mode appears. You must press the plastic trim border — not the touchscreen glass itself.
Step 3: Navigate System Info → Radio Part Info → Serial Number.
The serial is a 14-character alphanumeric code (e.g. T00AM394958584). Because the Voyager is the value-trim sibling of the Pacifica, no features are different that would affect this method.
Pulling Out the Radio Unit to Access the S/N on the Tag
If the serial does not appear on screen, the next step is checking the radio itself.
Many Chrysler radios require physical access to the serial tag attached to the unit.
Typical approach:
- Start by completely powering down the engine - pull the key out.
- Then remove the trim panel.
- Next, unscrew the mounting points and slide the radio forward.
- Look for a factory sticker showing the serial number.
Physical Radio Removal for Chrysler Voyager
Chrysler Voyager (2020-2024) is essentially a rebadged Pacifica with similar Uconnect system.
Example: Chrysler Voyager serial number label location
What a Valid Serial Number Looks Like
Your Chrysler Voyager 2024 radio serial number may start with:
T00AMT00BETM9T0MYDA2CTQNTVPQNT0071T00AD
Final Step - Enter the Radio Code
After locating the radio serial and received the unlock code, the next step is entering it into your radio.
Chrysler factory radios display a CODE prompt when ready for input.
The process is straightforward, but button layouts and confirmation methods may change depending on the radio version installed in your Voyager.
Entering Process
To enter the unlock code on your Uconnect radio:
- When the radio is locked, the screen will display "ENTER CODE" or show four dashes (----).
- Use the on-screen keypad (touchscreen models) or the preset buttons (non-touchscreen models) to enter each digit of your 4-digit code.
- After entering all 4 digits, the radio will unlock automatically – no need to press a confirm button.
Tip: Make sure you enter the code carefully. Three incorrect attempts will trigger a temporary lockout.
Older non-touchscreen Chrysler radios – MODE + SCAN priming
Pre-touchscreen head units (REF, REN, RBZ era fitted to 2007 to 2012 Chrysler 200, 300, PT Cruiser, Town and Country, and Sebring) use a different entry path:
- Turn the radio on with the ignition in ACC or ON. The display reads CODE.
- Press and hold MODE and SCAN together until the display shows 0000.
- Use presets 1, 2, 3, 4 to cycle each of the four digits in turn (preset 1 advances the first digit, preset 2 the second, and so on).
- When all four digits match your code, press SEEK to confirm. The radio unlocks and returns to normal play mode.
Fast Chrysler Voyager Radio Unlock Process Explained
Car radios use security codes dependent on the radio unit itself rather than the vehicle model or production year.
- Our lookup service works by matching your Chrysler Voyager radio's serial number.
- Once the serial number is submitted, the system identifies the radio family and retrieves the corresponding code.
- Simply input the digits into the Voyager stereo.
- Compared to Chrysler dealer retrieval, this method is faster and more convenient.
Fixing Common Code Entry Problems for 2024 Voyager
Not every Chrysler head unit shows the modern touchscreen ENTER CODE keypad. Older REF, REN, RBZ, and base radios surface the lock state through plain display words. Match what you find on your screen to know which path to follow:
- CODE – The radio is asking for the 4-digit unlock code right now. Use the MODE + SCAN priming method described in the code entry section to enter it via presets 1 to 4.
- WAIT – You have entered three wrong codes already and the radio is in a 30 to 60 minute timed lockout. Leave ignition ON; turning the key off restarts the timer.
- SAFE – Less common on Chrysler, more common on older Stellantis-platform Fiat-sourced radios fitted to some PT Cruiser and Sebring trims, but still appears. Same meaning as CODE – the radio expects a 4-digit unlock code via the preset-button method.
If your screen shows none of these words and the radio is simply dark or stuck on a Stellantis logo, the head unit is not in a lock state – it is in a different fault. Contact us with a photo of what you see and we will confirm whether this is a code issue or a hardware repair path.
Common issues:
- part number instead of serial
- missing characters
- Incorrect prefix
Check:
- serial number accuracy
- digit sequence
- correct enter key
Common mistakes:
- part number vs serial
- extra spaces or missing characters.
Messages like SAFE mean too many attempts.
Solution:
- ignition ON
- radio active
- wait for unlock delay.
Some radios require:
- holding the final digit
- pressing SEEK.