Locked Voyager Radio? Here's Exactly How to Get the Code
To get the code, you'll take only a few simple steps.
- Locate the radio's serial number - this is the only information required by our side.
Unlike when contacting the dealer, no VIN is needed. - Enter the serial number into our generator above.
Our system checks it against a database of supported factory radios and automatically catches the matching anti-theft code. - In most cases, the code will appear instantly on the screen after payment and is also sent to your email for backup.
If we need to check it manually, you'll be notified before checkout. - Once you get it, simply enter it into the radio to restore the functionality.
Radio Serial Number Explained - Finding It on Your Chrysler
Very important thing to know is that factory radios use a specific serial number to identify each unitindividually.
The anti-theft system matches the code directly to this serial.
Unlike vehicle-specific data like VIN or registration info, it is not determined by the model or production year, so you'll be able to get it even if you have a radio that you installed afterwards.
Depending on the manufacturer and radio installed in your Chrysler Voyager, the retrieval method is different.
These are the most reliable ways to locate it.
Find Your Serial Number on the Radio Display
The method for 2023 Chrysler Voyager is this:
The Chrysler Voyager was reintroduced in 2020 as the entry-level minivan in the lineup — essentially the Pacifica with fewer features and a lower price. It rides on the same platform and uses Uconnect 8.4" NEW, which means the bezel-edge method works just like on the Pacifica.
Step 1: Turn ignition to ACC or ON.
Step 2: Press the bottom-left and bottom-right edges of the physical screen bezel frame at the same time. Hold until Dealer Mode appears. You must press the plastic trim border — not the touchscreen glass itself.
Step 3: Navigate System Info → Radio Part Info → Serial Number.
The serial is a 14-character alphanumeric code (e.g. T00AM394958584). Because the Voyager is the value-trim sibling of the Pacifica, no features are different that would affect this method.
Releasing the Radio to See the S/N on the Tag
If the serial does not appear on display, the next step is checking the radio itself.
Many Chrysler radios require physical access to the ID label attached to the unit.
Usual approach:
- Start by completely powering down the engine - pull the key out.
- Then detach the radio surround.
- Next, release the mounting points and pull the radio forward.
- Look for a barcode label showing the serial number.
Physical Radio Removal for Chrysler Voyager
Chrysler Voyager (2020-2024) is essentially a rebadged Pacifica with similar Uconnect system.
Example: Chrysler Voyager serial number label location
How Serial Numbers Usually Look on These Voyager Radios
Your Chrysler Voyager 2023 radio serial number may start with:
T00AMT00BETM9T0MYDA2CTQNTVPQNT0071T00AD
Code Entry Process for 2023 Voyager
Once you receive the correct unlock code based on the S/N, you can restore default functionality by entering it into the unit.
The code entry process depends on the radio interface, but most 2023 Voyager systems follow a similar structure using preset buttons, touch controls, or rotary knobs - depending on if it's a factory or an aftermarket unit.
You will typically see ENTER CODE displayed on screen.
Entering Process
To input the unlock code on your Uconnect radio:
- When the radio is locked, the screen will display "ENTER CODE" or show four dashes (----).
- Use the on-screen keypad (touchscreen models) or the preset buttons (non-touchscreen models) to enter each digit of your 4-digit code.
- After entering all 4 digits, the radio will unlock automatically – no need to press a confirm button.
Tip: Make sure you enter the code carefully. Three incorrect attempts will trigger a temporary lockout.
Older non-touchscreen Chrysler radios – MODE + SCAN priming
Pre-touchscreen head units (REF, REN, RBZ era fitted to 2007 to 2012 Chrysler 200, 300, PT Cruiser, Town and Country, and Sebring) use a different entry path:
- Turn the radio on with the ignition in ACC or ON. The display reads CODE.
- Press and hold MODE and SCAN together until the display shows 0000.
- Use presets 1, 2, 3, 4 to cycle each of the four digits in turn (preset 1 advances the first digit, preset 2 the second, and so on).
- When all four digits match your code, press SEEK to confirm. The radio unlocks and returns to normal play mode.
Fixing Common Code Entry Problems for 2023 Voyager
Messages like SAFE mean too many attempts.
Solution:
- ignition ON
- radio active
- wait for unlock delay.
Look for missing confirm steps, wrong input methods, or disabled buttons during lockout.
Check:
- S/N accuracy
- digit sequence
- correct final press
Common mistakes:
- part number vs serial
- extra spaces or missing characters.
Avoid hardware model numbers or part numbers.
Not every Chrysler head unit shows the modern touchscreen ENTER CODE keypad. Older REF, REN, RBZ, and base radios surface the lock state through plain display words. Match what you find on your screen to know which path to follow:
- CODE – The radio is asking for the 4-digit unlock code right now. Use the MODE + SCAN priming method described in the code entry section to enter it via presets 1 to 4.
- WAIT – You have entered three wrong codes already and the radio is in a 30 to 60 minute timed lockout. Leave ignition ON; turning the key off restarts the timer.
- SAFE – Less common on Chrysler, more common on older Stellantis-platform Fiat-sourced radios fitted to some PT Cruiser and Sebring trims, but still appears. Same meaning as CODE – the radio expects a 4-digit unlock code via the preset-button method.
If your screen shows none of these words and the radio is simply dark or stuck on a Stellantis logo, the head unit is not in a lock state – it is in a different fault. Contact us with a photo of what you see and we will confirm whether this is a code issue or a hardware repair path.