How to Retreat 2021 Jeep Compass Radio Code [Instant]

Need the radio code for your Jeep Compass 2021? The unlock process is based on the radio's serial number, and it's the same for all Jeeps. But if you want in-depth instructions for your exact 2021 Compass, follow this guide.

No VIN required - just enter the serial number of the radio.
It takes less than a minute.

Delivery is instant in most Jeep Compasss.
Some Jeep cases require manual processing (24h).

You'll get your money back if it fails.
Just follow our simple verification steps.
Check the Refund Policy page for more information.

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

TM9341100221 (TM9)
T00BE351823197 (T00BE)
T0MYD164822563 (T0MYD)
Dealer price $120 92% Off!
Our price: only $19.99
Secure Payment
Get Code Instantly
281+ Reviews
See reviews →
Full refund if your code fails
Jeep Compass 2021 car photo
How to find Jeep Compass 2021 radio serial number

Step-by-Step Jeep Compass 2021 Radio Code Retrieval Guide

  • Instead of contacting Jeep dealer or searching forums you can generate the code online with the radio serial number.
  • Identify the serial number. You will always find it on the unit itself, and in some cases it can be visible on the Compass's display.
  • Enter it into the field above, and our software will generate the correct 2021 Compass unlock code.
  • When you receive the code, type it in using Compass's radio buttons to unlock the system successfully.
  • The entire process takes less than a minute for most users and requires no VIN, documents, or technical knowledge.

How to Enter the Radio Code

After generating the correct unlock code based on the serial number, you can restore default functionality by entering it into the unit.

The code entry process depends on the control layout, but most 2021 Compass systems follow a similar structure using preset buttons, touch controls, or rotary knobs - depending on if it's a factory or an aftermarket unit.

You will typically see SAFE displayed on screen.

Detailed Entering Instructions for Compass 2021

To input the code on your 2021 Compass (MP)'s Uconnect 7.0":

  1. Ignition ON. Screen displays "ENTER CODE" or ----.
  2. Tap the touchscreen keypad to enter each digit of the 4-digit code.
  3. Radio unlocks automatically after entering the 4th digit.

Lockout: 3 wrong attempts = 60-minute lockout. Keep ignition ON. Cycling the ignition resets the timer.

In-depth Entering Instructions for Compass 2021

Once the unlock code is in hand, the 2021 Compass Uconnect head unit can be unlocked directly at the dash - no scan tool or dealer visit required.

  • Limited attempts: Mopar/Uconnect head units only accept three incorrect tries before the radio drops into a WAIT state, so verify every digit before pressing it.
  • Place the ignition in RUN/ACC so the radio powers up but the engine stays off.
  • Wait for the display to show CODE, Please enter Anti-Theft Code, or a similar prompt.
  • On the Uconnect 4C 8.4 (UAQ/UAS), tap the on-screen number pad and confirm with the OK/Enter touch button.
  • On the Uconnect 4 7-inch (UAG), use the on-screen keypad - or the numbered preset buttons if the unit prompts for them - to enter the code in sequence.
  • If WAIT appears after incorrect attempts, leave the radio powered with the ignition in RUN for the documented cool-down period (about 30 minutes; the vehicle may be driven during this time) before trying the correct code again.

How to Find the Serial Number on Your 2021 Jeep Compass Radio?

The initial step is writing down the radio S/N.

Most drivers assume the code depends on the Jeep model or year, but in reality, the whole process depends on the unique radio unit's serial number.

This number identifies the exact head unit installed in your Jeep Compass.

This is even better, because if you have an aftermarket radio, the VIN or other vehicle-specific data wouldn't help.

Depending on the radio used, you may be able to see the serial directly from the screen or by looking at the label on the radio chassis.

Which Head Unit Is in Your 2021 Compass?

The 2021 Compass continues with the Uconnect 4 family - the final model year before the major 2022 mid-cycle refresh that brought Uconnect 5 to the model. There are three factory touchscreens to identify across the trim ladder: one 7-inch UAG and two 8.4-inch variants that differ only in built-in navigation.

  • Uconnect 4 (UAG) - 7-inch non-NAV touchscreen. Standard on Latitude, Altitude, Freedom and 80th Anniversary Edition. Visual ID: 7-inch display centred in the dash opening with bezel filling the surround; Apple CarPlay and Android Auto are supported, but there is no built-in NAV app and no Map tile on the home screen. The most common radio in this model year by volume.
  • Uconnect 4C (UAS) - 8.4-inch non-NAV touchscreen. Standard on Trailhawk, optional upgrade on Latitude and Limited. Visual ID: large 8.4-inch screen filling the dash opening; CarPlay and Android Auto present, but no Map/NAV tile because navigation is not built in.
  • Uconnect 4C NAV (UAQ) - 8.4-inch touchscreen with built-in GPS. Standard on Limited and High Altitude, frequently optioned on Trailhawk. Visual ID: identical 8.4-inch bezel and screen size to UAS, but the home screen carries a dedicated NAV/Map tile and on-board maps are bundled.

Telling UAS apart from UAQ is purely a software check - identical hardware face, but only UAQ shows a Map/NAV tile and on-board maps. The Sport trim continues with a 5-inch Uconnect 3 base unit; this is a separate, simpler radio and not part of the Uconnect 4 family.

Accessing the Serial Number Through the Radio Menu

The method for 2021 Jeep Compass is this:

The 2021 Jeep Compass (MP platform, redesigned) comes with the Uconnect 7.0" touchscreen (RA2.1). The redesigned MP Compass features a cleaner dashboard compared to the older MK49 platform, with the 7" screen sitting in a modern, horizontal center stack. Find the serial via Dealer Mode:

  1. Turn ignition to ACC or ON.
  2. Hold down the Temperature Up and Temperature Down buttons together for about 5 seconds.
  3. The Engineering Menu shows on the 7" screen.
  4. Navigate to: System Info → Target Main Data → Serial Number.

Note: On the 7" Uconnect, look for "Target Main Data" rather than "Radio Part Info" — this is normal for the RA2.1.

Before Removing the Radio, Try This Screen Method

The 2021 Compass continues with the Uconnect 4 family - 8.4-inch UAQ NAV, 8.4-inch UAS non-NAV and the smaller 7-inch UAG. The radio serial number can normally be read on screen through a hidden dealer/diagnostic menu, although some 2021 builds with newer Uconnect software may have dealer mode access tightened or fully blocked.

Uconnect 4C 8.4 (UAQ / UAS)

  • Switch the ignition to RUN/ACC and wait for the Uconnect interface to finish booting.
  • Press and hold the driver-side temperature UP, the driver-side temperature DOWN, and the front DEFROST buttons together for roughly 5-10 seconds.
  • If the climate-button method does nothing, press and hold the bottom-left and bottom-right corners of the screen at the same time for about 5-10 seconds.
  • Browse to the radio/system info section to read the serial number on screen.
  • Photograph the screen so each character can be transcribed without typos.

Uconnect 4 7-inch (UAG)

  • Place the ignition in RUN/ACC and let the screen finish loading.
  • Press and hold both temperature UP and temperature DOWN buttons together for around 5-10 seconds to enter the engineering menu.
  • Open System Info / Target Main Data to view the serial number on screen.
  • Snap a photo of the display so the digits can be copied accurately.

Manufacturer Label Inspection

If the serial number cannot be accessed on-screen, use the removal method.

Most Jeep Compass OEM radios include a label with the serial number printed on the chassis.

Process details:

  • Disable power.
  • Lift away surrounding panel pieces.
  • Remove fasteners holding the radio.
  • Slide outward to inspect the label.

If the on-screen method is unavailable on your 2021 Compass (MP), remove the radio to read the serial label:

  1. Power down the vehicle.
  2. Remove the center stack trim around the 7" screen. The MP Compass's modern trim uses snap fasteners – use a plastic trim tool, beginning at the bottom.
  3. Unscrew the four Torx T20 mounting bolts.
  4. Slide the unit forward to read the serial label on the top or side of the chassis.

MP Compass Note: The redesigned Compass has a tighter center stack than the older MK49. Be patient when prying the bezel to avoid breaking the slim trim clips.

Manufacturer Label Inspection

If dealer mode has been restricted on a 2021 Compass by a Uconnect software update - many MP owners have reported this on later builds - the printed chassis label still carries the radio serial. The Uconnect 4 head unit on the MP Compass sits inside a centre stack with the climate cluster below, so methodical removal is essential.

  • Safety first: turn the ignition off, take out the key, disconnect the negative battery terminal, and wait a few minutes before touching wiring; never disturb the yellow airbag/SRS connectors and use plastic trim tools to avoid shorts and broken clips.
  • Tools you will need: plastic trim removal kit, Phillips and small Torx bit set, 7mm/10mm socket set, flashlight.
  • Pop the centre stack bezel free using a plastic pry tool starting at the bottom edge and working up the sides; keep finger pressure even because the bezel sits adjacent to the climate cluster.
  • Unplug any switch/HVAC connectors at the rear of the bezel before laying it on a clean cloth.
  • Remove the screws (typically four, two upper and two lower) holding the radio cage to the support bracket.
  • Slide the radio rearward and disconnect the antenna lead and the multi-pin power/data harness on the back.
  • The serial number is printed on a barcode/sticker label on the top or side of the radio chassis, alongside the part number and supplier markings.
  • Photograph the label up close and double-check ambiguous characters such as 0/O, 1/I and B/8 before submitting the serial. If working around airbag wiring is uncomfortable, have a professional installer take the unit out for you.
Jeep Compass 2021 radio serial number label location

Example: Jeep Compass serial number label location

Typical Serial Number Examples for 2021 Compass

The 2021 Compass (MP) with Uconnect 7.0" serial formats:

  • T00AM – Most common Harman prefix
  • T00BE – Continental variant
  • T0MYD – Newer Harman production (2020+)

Radio designation: RA2.1 (Uconnect 7.0"). Serial: 14 characters, alphanumeric. S/N pattern is identical across all Uconnect variants.

S/N Patterns and Prefixes

The factory radios on the 2021 Compass follow the standard Mopar/Uconnect serial style, with the prefix depending on the Uconnect tier and the supplier (Visteon, Continental, Harman or Panasonic) that built the unit.

Uconnect 4C 8.4 (UAQ / UAS)

  • Typically a 14-character alphanumeric string printed on the chassis label.
  • Commonly begins with T - frequent prefixes include T00AM, TM9 and TQ1 - or with A2C on Continental-built variants.
  • Usually a continuous run of letters and digits with no dashes or spaces.

Uconnect 4 7-inch (UAG)

  • Usually carries a Mopar/Harman or Panasonic-style serial printed on the chassis sticker, so the label on the unit itself is the authoritative reference.
  • Copy the serial exactly as printed and avoid guessing characters that look unclear.

Fixing Common Code Entry Problems for 2021 Compass

The RA2.1 on the 2021 Compass (MP) supports on-screen serial retrieval via the Engineering Menu: hold Temperature Up + Temperature Down for 5 seconds, then go to System Info → Target Main Data → Serial Number.

  • Serial — 14 characters, prefixed by T00AM, T00BE, or T0MYD. This is what to submit.
  • Part number — starts with P or 68. Do not use.

On this system, the menu path uses "Target Main Data" rather than "Radio Part Info" — that is normal for this system.

After 3 wrong attempts on the Compass MP's 7" Uconnect activate a 60-minute lockout. The screen shows "WAIT". To handle the lockout: keep the ignition ON for the full 60 minutes. Turning off the ignition resets the lockout timer.

When a code is rejected on the Compass MP's Uconnect 7.0" typically indicates the wrong serial was submitted. The RA2.1 serial is 14 characters, starting with T00AM, T00BE, or T0MYD. The part number (P... or 68...) also appears on the label but is not used.

Dealer Mode is the most reliable way to confirm the serial on the Compass MP. Contact support for a free re-check if the code fails.

Should the Compass MP not show a code prompt after a power event: ensure ignition is ON and allow a moment for the RA2.1 system to boot. Inspect the fuse panel — fuse failure prevents the radio from showing anything.

The Compass MP's Uconnect 7.0" (RA2.1) uses touchscreen exclusively for code entry — no physical preset buttons used. Tap each digit on the on-screen keypad. Radio unlocks after the 4th digit.

The temperature button combo (Temp Up + Temp Down hold) is for serial retrieval only — this is not the code entry method.

What Caused the Radio to Lock?

The 2021 Compass (MP) encounters radio lockouts most commonly from:

  • Battery disconnect or replacement — the most frequent reason on all Uconnect platforms.
  • Dead battery from commuter use — compact crossovers with frequent short trips may experience battery drain from short-trip driving, triggering the lock.
  • Used purchase — the redesigned Compass is a popular family-oriented used vehicle, and the unlock code is frequently missing at resale.
  • Blown fuse — a blown radio fuse interrupts power and triggers the code lock.

The code is linked to the radio serial and never expires.

Get Your Jeep Compass 2021 Radio Code Now