2023 Ram 1500 Radio Code: Get It Back Instantly

Need the radio code for your Ram 1500 2023? The unlock process is based on the radio's S/N, and it's the same for all Rams. But if you want in-depth instructions for your exact 2023 1500, follow this guide.

No VIN required - just enter the serial number of the radio.
No documents required.

We offer a full refund if the code doesn't work.
Video proof may be required.
Review our Refund Policy for complete terms.

Most 1500 codes are delivered instantly.
Some Ram cases require manual processing (24h).

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

T00BE351823197 (T00BE)
TM9341100221 (TM9)
T00AM1801T0282 (T00AM)
Ram 1500 2023 car photo
How to find Ram 1500 2023 radio serial number
Dealer price $120 92% Off!
Our price: only $19.99
Safe Payment
Fast Delivery
299+ Reviews
See reviews →
Full refund if your code fails

How the Code Retrieval Process Works for Ram 1500 2023

  • Instead of contacting Ram dealer or searching forums you can find the code online with the radio serial number.
  • Start by finding the serial number. It is always present on the unit itself, and sometimes it can be visible on the 1500's radio screen.
  • Type it into the generator above, and our system will calculate the correct 2023 1500 unlock code.
  • When you receive the code, type it in using 1500's radio buttons to release the blockade successfully.
  • The entire process takes less than a minute for most users and requires no VIN, documents, or technical knowledge.

Can't Find Your Radio S/N? Follow The Steps Below for Ram 1500 2023

Very useful fact to know is that factory radios use a unique serial number to identify each unitindividually.

Your anti-theft system links the code directly to the serial.

Different from car-specific data like VIN or registration info, it is not determined by the model or production year, so you'll be able to get it even if you have a radio that you bought afterwards.

Depending on the maker and radio installed in your Ram 1500, the access method varies.

These are the best ways to find it.

Which Head Unit Is in Your 2023 Ram 1500?

The 2023 Ram 1500 carries the same Uconnect 5 line-up that became standard for 2022. Three head units split across the trim ladder, all built on the Uconnect 5 platform except the carry-over base radio.

  1. Uconnect 3 / 4 5-inch (UAG) - the small base radio, standard on Tradesman work-truck specification. Visual ID: 5-inch display flanked by hard buttons and tuning knobs, no Apple CarPlay or Android Auto. Simplest radio in the 2023 line-up.
  2. Uconnect 5 8.4-inch (UBM non-NAV / UBL NAV) - 8.4-inch landscape Uconnect 5, standard across Big Horn / Lone Star, Laramie, Rebel and most non-Limited trims. Visual ID: 8.4-inch landscape glass running the redesigned Uconnect 5 multi-tile home screen, wireless Apple CarPlay and wireless Android Auto, multi-profile support, over-the-air updates.
  3. Uconnect 5 12-inch (UBQ) - 12-inch portrait Uconnect 5 touchscreen, optional on Laramie and Rebel, standard on Longhorn and Limited. Visual ID: very large vertically oriented 12-inch screen with split-screen multitasking, wireless CarPlay / Android Auto in the upper window with vehicle controls below.

Quick field test: small 5-inch with knobs = UAG; 8.4-inch landscape with the Uconnect 5 multi-tile home screen = UBM (no NAV) or UBL (with NAV); very large vertical 12-inch screen with the same Uconnect 5 graphics = UBQ.

Fast Serial Lookup Using Radio Controls

The method for 2023 Ram 1500 is this:

The 2023 Ram 1500 5th-generation is equipped with the Uconnect 4C (RA4) with either the 8.4" standard-option or optional 12" portrait touchscreen in higher trims. The serial number is retrievable via Dealer Mode:

  1. Turn ignition to ACC or ON.
  2. Press the bottom-left and bottom-right corners of the physical screen bezel (plastic frame, not the glass) at the same time for approximately 5 seconds.
  3. Dealer Mode appears on the display.
  4. Go to: System Info → Radio Part Info → Serial Number.

12" Screen Note: On the 2023 1500 with the 12" portrait display, reach both bottom bezel corners. Some owners find it easier to using both thumbs at once. The Dealer Mode method is preferred before attempting removal of this larger module.

Access the S/N by Pulling Out the Radio Unit

If the serial number cannot be accessed through menu, use the hardware method.

Most Ram 1500 OEM radios include a sticker with the serial number printed on the casing.

Basic process:

  • Disable power.
  • Lift away surrounding panel pieces.
  • Release clips holding the radio.
  • Slide outward to inspect the label.

If Dealer Mode won't open on the 2023 Ram 1500, physical removal is the fallback:

  1. Turn off the vehicle.
  2. Remove the surrounding trim panel using a plastic pry tool. The 5th-gen 1500's modern interior uses snap-fit clips.
  3. Remove the mounting screws (Torx T20 or T25) securing the infotainment unit.
  4. Slide the unit forward to access the serial label on the rear of the module.

12" Screen Note: The 12" portrait module is larger than the 8.4". Hold it with both hands when extracting. Try the on-screen method before removal.

Locate Serial on Ram 1500's Radio Chassis

Because the 2023 Ram 1500 ships with Uconnect 5 across the 8.4-inch and 12-inch screens and Stellantis has restricted on-screen dealer mode on those units, the printed chassis label is the most dependable place to read the radio serial. The DT centre stack is closely integrated, and the 12-inch portrait UBQ in particular sits in a deeply integrated bezel.

  1. Safety first: turn the ignition off, take out the key, disconnect the negative battery terminal and wait a few minutes before touching wiring; never disturb the yellow airbag / SRS connectors and use plastic trim tools so nothing shorts or breaks.
  2. Tools you will need: plastic trim removal kit, Phillips and small Torx (T20 / T15) bit set, 7 mm socket, flashlight.
  3. Removal overview - 8.4-inch UBM / UBL: lift the rubber mat in the cubby at the top of the centre dash to reveal two T20 Torx screws, and lift the rubber mat in the small cubby above the 12 V / AC outlet for a third T20 screw. Remove all three, then carefully pry the centre stack bezel free with a plastic trim tool.
  4. Removal overview - 12-inch portrait UBQ: the 12-inch portrait Uconnect 5 screen lives in a much larger integrated bezel that extends across most of the centre stack and is tied into the climate cluster - removal involves more trim panels and connectors than the 8.4-inch unit.
  5. With the bezel free, remove the four 7 mm screws holding the radio cage to the dash support, then slide the head unit rearward.
  6. Disconnect the antenna lead, the USB / aux harness and the multi-pin power / data connectors before fully extracting the unit.
  7. The serial number sits on a printed barcode / sticker label on the top or side of the radio chassis, next to the part number and supplier markings.
  8. Photograph the label and double-check ambiguous characters such as 0 / O, 1 / I and B / 8 before submitting the serial. Because the 12-inch portrait UBQ is so deeply integrated with the surrounding bezel and climate cluster, we strongly recommend a professional installer or dealership pull that unit if you are not experienced with DT-platform interior work.
Ram 1500 2023 radio serial number label location

Example: Ram 1500 serial number label location

Common S/N Formats Used on 2023 1500 Units

The 2023 Ram 1500 (5th-gen) Uconnect 4C (RA4) serial number formats:

  • T00AM – Harman Uconnect 4C (standard prefix)
  • T00BE – Continental Uconnect 4C variant
  • T0MYD – Newer Harman production (later models)

Radio designations: RA4 (8.4" Uconnect 4C), UAQ/UAR (12" screen option). Serial: 14 characters alphanumeric.

Important Don't confuse the serial with the part number (P05064... or 68...) on the same label. Only the 14-char serial is used for the code.

S/N Patterns and Prefixes

The factory radios on the 2023 Ram 1500 use the standard Mopar / Uconnect head-unit serial style. The exact prefix depends on which Uconnect tier shipped with the truck and on which supplier (Continental, Harman or Panasonic) built the unit.

Uconnect 5 8.4-inch (UBM / UBL) and 12-inch (UBQ)

  1. Typically printed as a 14-character alphanumeric string on the chassis label.
  2. Because Uconnect 5 hardware is newer than the well-documented Uconnect 4 line, there is no published consensus prefix list specific to UBM / UBL / UBQ - the label on the unit itself is the authoritative reference.
  3. Copy the serial exactly as printed; do not assume a particular prefix.

Uconnect 3 / 4 5-inch (UAG)

  1. Usually carries a Mopar / Harman or Panasonic-style serial printed on the chassis sticker.
  2. Always copy the serial exactly as printed and avoid guessing characters that look unclear.

Final Step - Enter the Radio Code

Once you receive the correct unlock code based on the serial number, you can restore default functionality by entering it into the unit.

The code entry process depends on the radio interface, but most 2023 1500 systems follow a similar structure using preset buttons, touch controls, or rotary knobs - depending on if it's a factory or an aftermarket unit.

You will typically see CODE displayed on screen.

In-depth Input Instructions for 1500 2023

To input the unlock code on the 2023 Ram 1500's Uconnect 4C:

  1. The touchscreen shows "ENTER CODE" after a battery event.
  2. Tap the touchscreen keypad to enter each digit of the 4-digit code.
  3. The radio restores after the 4th digit – no confirm button needed.

Lockout Warning: 3 wrong attempts = 60-minute lockout. Keep ignition ON. Cycling the ignition resets the 60-minute countdown.

Step-by-Step Code Input Guide

Once the unlock code has been retrieved for a 2023 Ram 1500 head unit, it can typically be entered at the dash. Owner-forum reports for 2023 Ram 1500 Uconnect 5 trucks continue to describe a manual code prompt rather than fully VIN-only auto-pairing.

  1. Limited attempts: Mopar / Uconnect head units only accept three incorrect tries before the radio enters a WAIT state, so confirm every digit before pressing it.
  2. Place the ignition in RUN / ACC so the radio powers up but the engine stays off.
  3. Wait for the display to show CODE, Please enter Anti-Theft Code or a similar prompt.
  4. On the 8.4-inch UBM / UBL and the 12-inch UBQ, tap the on-screen number pad to enter each digit and confirm with the OK / Enter touch button.
  5. On the 5-inch UAG base radio, press the numbered preset buttons in sequence to enter the four-digit code.
  6. If WAIT appears after incorrect attempts, leave the radio powered with the ignition in RUN for the documented cool-down period (about 30 minutes; the vehicle may be driven during this time) before trying the correct code again.

Why Is the Radio Asking for a Code?

The 5th-gen Ram 1500's Uconnect 4C locks automatically after the battery is disconnected or replaced. Fifth-gen 1500 owners encounter this primarily due to:

  • Battery replacement — the most common trigger across all Uconnect variants.
  • Blown radio fuse — common after aftermarket audio or accessory installation.
  • Buying pre-owned without a known unlock code.
  • Battery drained completely from sitting unused.

The code is derived from the radio's own serial number — not the VIN.

Fixing Common Code Entry Problems for 2023 1500

The 5th-gen Ram 1500's Uconnect 4C locks after 3 wrong entries. The screen continues to display "ENTER CODE" but blocks all taps during the lockout.

To clear: Keep ignition ON for a full 60 minutes. Turning off restarts the countdown. Ram 1500s used for towing that get turned off at job sites must complete the full wait without interruption.

The Ram 1500 Uconnect 4C uses touchscreen-only code entry — press each digit on the virtual keypad. No physical preset buttons are involved. The radio auto-unlocks after the last digit. On the 12" portrait display: same process — same touchscreen input.

No code prompt means the Uconnect 4C hasn't locked yet. To force the code screen: pull the radio fuse and reinsert it, then turn ignition ON. The prompt appears on startup.

The Uconnect 4C serial can be read via Dealer Mode on the 1500's touchscreen (System Info → Radio Part Info → Serial Number), or on the physical label on the unit housing after removal.

Serial: 14 chars starting with T00AM, T00BE, or T0MYD. Ignore the part number (P05... or 68...).

The Uconnect 4C label on the Ram 1500 has both the serial number (14 chars: T00AM, T00BE, or T0MYD) and the part number (P05... or 68...). Only the serial generates the unlock code.

For the large screen: the serial label is on the back of the module, visible only when removed. Double-check the label and contact support if the code still fails.

Get Your Ram 1500 2023 Radio Code Now