Unlock Your Harman Uconnect 8.4 RA3 VP3 ROW Radio
Harman | Chrysler | Instant Retrieval
Read the full refund policy.
Supported Factory Serial Numbers
| Serial Prefix | Status |
|---|---|
T00AM |
Supported |
T00BE |
Supported |
T0012 |
Supported |
If your serial starts with any prefix above, we can retrieve your code.
How to get your code?
Everything runs from the serial number printed on the radio itself.
- 1 Read the number on the label Pull the radio a few centimetres forward and read the number off its sticker - nothing has to be unplugged.
- 2 Enter the serial Copy it character for character. We check the format up front, so a typo never costs you anything.
- 3 Receive the unlock code The code is delivered instantly, day or night. Enter it on the radio and the anti-theft screen goes away.
Covered by a full refund if the code does not work on your unit.
Your radio carries a label like this one. The serial is the code printed on it.
Example serial numbers
Real Chrysler serials, so you know what to look for:
T00AM1801T0282
(prefix: T00AM)
T00BE351823197
(prefix: T00BE)
T0012566327123
(prefix: T0012)
T00AM2244H1937
(prefix: T00AM)
T00BE104477269
(prefix: T00BE)
Common prefixes: T00AM, T00BE, T0012
Is This Your Uconnect 8.4 RA3 VP3 ROW?
Not sure if your vehicle is equipped with the Uconnect 8.4 RA3 VP3 ROW? Compare the design, controls, display and features listed below against your factory radio.
Visual clues on this unit:
- 8.4" touchscreen in the centre of the dash
- A non-navigation unit: the menus never show a map
- Built for the Rest of World market
- The chassis label carries the RA3 VP3 ROW sales code
- Serial number starting with T00AM, T00BE, T0012
Tick these off to confirm:
- the chassis label carries the RA3 VP3 ROW sales code
- the printed serial opens with T00AM, T00BE, T0012
- the vehicle was built between 2013-2018
- the display matches the Uconnect 8.4 8.4" touchscreen
Lowest-volume 8.4 variant. Chassis part number confirms - check against this page's supported list before buying.
Uconnect 8.4 RA3 VP3 ROW Overview
Fitted as factory equipment in selected Chrysler models, the Uconnect 8.4 RA3 VP3 ROW handles audio playback and vehicle integration out of the box. Depending on the version, it can also add Bluetooth, touchscreen operation, CD/DVD playback, navigation or wider multimedia support.
Uconnect 8.4 RA3 (Rest of World) is the 8.4-inch non-navigation Uconnect built for non-NA/EU markets - South America, Middle East, certain Asian markets. Same hardware as RA3 NA with locale-specific firmware.
The Uconnect 8.4 RA3 VP3 ROW was installed in various Chrysler models between 2013-2018. It was commonly fitted to vehicles built on the Harman multimedia platform and remains one of the more recognisable factory radios of that period.
Typical features include:
8.4" touchscreen
AM/FM radio
Bluetooth hands-free and audio streaming
USB media playback
SiriusXM satellite radio*
Steering wheel control support
Anti-theft security code
*Availability depends on the vehicle specification.
Like many factory-installed radios, the Uconnect 8.4 RA3 VP3 ROW is secured with an anti-theft system. If power is interrupted after replacing or disconnecting the vehicle battery, the unit may demand the original radio code before it can be used again.
Background on the platform itself is published by the official Uconnect site.
Finding the Serial Number on the Uconnect 8.4 RA3 VP3 ROW
The code is generated from the radio's own serial number, so that number is the only thing you need before ordering. It is printed on the factory sticker of the unit itself, not in the vehicle documents.
On the Uconnect 8.4 RA3 VP3 ROW: Chassis top label. Removal required.
Three steps to the serial number:
- Pull the unit forward with release keys (cheap online) - the wiring can stay connected.
- Read the serial from the printed label on the housing, beside the barcode.
- Copy it into the form letter for letter; the checker catches any typo before payment.
The label you are looking for
The unlock on video
From our YouTube channel - the same steps apply to this unit.
Typical Ways a Uconnect 8.4 RA3 VP3 ROW Gets Locked
Almost all of the Uconnect 8.4 RA3 VP3 ROW codes we generate follow one of these four events.
The battery was replaced
Whether the battery was changed or just ran flat, the radio sees a power loss and asks for the code when it starts.
The seller had no code
Used cars very often arrive with a locked radio and no code card in the glovebox. The serial number on the unit is all that is needed to recover it.
After mechanical work
The repair went fine - the locked radio is just the side effect of the battery being off the car for a while.
A different unit is in the dash now
The code does not transfer from one unit to another: the swapped-in unit has a different serial, and that serial is what the code is based on.
The route back to a working radio is the same in every case: serial number in, original code out, in seconds.
Technical Overview
| Specification | Value |
|---|---|
| Manufacturer | Harman |
| Radio Family | Uconnect 8.4 |
| Variant | RA3 VP3 ROW |
| Market | Rest of World |
| Vehicle Brand | Jeep / Dodge / Ram |
| Production Years | 2013-2018 |
| Display | 8.4" touchscreen |
| Navigation | No |
| Serial Prefixes | T00AM, T00BE, T0012 |
Equipment on the Uconnect 8.4 RA3 VP3 ROW differs with the car it came in: navigation, Bluetooth, USB and media playback depend on trim, market and model year.
OEM Radio References 3
The Uconnect 8.4 RA3 VP3 ROW was supplied under the part numbers below. Spot the one on your unit's label and you can be sure this is the right page.
68164639AB
68164639AC
68164639AG
The part number is printed on the sticker on top of or on the side of the radio chassis, usually next to the serial number. If yours appears above, the Uconnect 8.4 RA3 VP3 ROW is the right page.
Uconnect 8.4 RA3 VP3 ROW Vehicle Compatibility
| Vehicle Model | Typical Production Years | Notes |
|---|---|---|
| Jeep Grand Cherokee WK2, Wrangler JK, Renegade BU (ROW markets) | 2013-2018 | |
| Dodge Durango, Ram 1500/2500 (ROW markets) | 2013-2018 |
Some vehicle models were available with several different factory radio depending on trim level, production year or regional market. Always confirm your radio model before ordering a code.
Putting the code into the radio
Nothing to install and no tools needed - only the code itself.
- Put the key in accessory position so the unit powers up and asks for the code.
- A four-digit keypad appears on the display.
- Key in the code, one digit at a time, left to right.
- The unit checks the code automatically on the last digit.
- Right code in, lock screen gone - the radio is back to normal.
When it does not go to plan
The unit will not take more codes
Wrong codes put the unit into a lockout, and the only fix is to leave it powered and wait. 30-minute WAIT after three wrong codes.
I cannot find the serial number
It is printed on the housing, so the unit normally has to come forward to read it. Chassis top label. Removal required.
Why it happened again
That is normal - the anti-theft system re-arms every time the unit loses power. Battery disconnect or replacement.
I am not sure I have the right variant
Close relatives of this unit look almost identical from the driver's seat. Lowest-volume 8.4 variant. Chassis part number confirms - check against this page's supported list before buying.
Note the four digits somewhere safe - they are permanent and reusable after any power cut.
Questions About Your Uconnect 8.4 RA3 VP3 ROW Code
What Customers Say
Left by customers after their radio came back to life. See the reviews page for all of them.
"I really thought it was a scam till I risked it and it was literally instant. Definitely trusted"
Wow I got my radio code and less than three minutes
Martin Murillo - Chrysler
Perfect
Luis - Chrysler
Ordering a Uconnect 8.4 RA3 VP3 ROW Code
Code delivered automatically once payment clears - on screen and by email.
A complete refund any time the code fails to open your unit.
Available 24/7 - no appointment, no dealer visit, no towing.
The code never changes - keep it and future battery changes cost nothing.
Related Radio Models
Still unsure? These neighbouring units use much of the same hardware as the Uconnect 8.4 RA3 VP3 ROW and may be what you actually have.
The Uconnect 8.4 RA3 VP3 ROW is only one of the Harman radios we support - the Harman radio code page lists the rest.