Generate Jeep Renegade 2019 Radio Code : Instant Unlock⚡

Unlock your 2019 Jeep Renegade radio in just a few minutes. Simply enter the radio serial to generate your code - no VIN required. Follow the full guide below if you need help finding or entering your code.

VIN is not needed for code retrieval - only serial number of your radio.
No documents required.

We offer a full refund if the code doesn't work.
Verification is quick and easy.
Review our Refund Policy for complete terms.

You'll usually get your Jeep Renegade code in seconds.
In rare cases, Jeep Renegade radio code delivery can take up to a day.

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

TM9341100221 (TM9)
T00BE351823197 (T00BE)
T0MYD164822563 (T0MYD)
Dealer price $120 92% Off!
Our price: only $19.99
Secure Payment
Get Code Instantly
290+ Reviews
See reviews →
Full refund if your code fails
Jeep Renegade 2019 car photo
How to find Jeep Renegade 2019 radio serial number

How Serial-Based Jeep Renegade Radio Unlock Works

  • Skip long troubleshooting discussions or service visits - you can generate the code online with the radio S/N.
  • Start by finding your radio's serial. It is always present on the unit itself, and sometimes you can see it on the Renegade's display.
  • Type it into the form above, and our system will calculate the correct 2019 Renegade unlock code.
  • After receiving your code, input it using Renegade's radio buttons to release the blockade successfully.
  • The entire process takes only a few minutes and requires minimal effort.

Radio Code Input Guide

Now that you've found the S/N and generated the unlock code, the final part is entering it into your radio.

Jeep factory radios display a CODE prompt when ready for input.

The process is usually straightforward, but button layouts and confirmation methods may vary depending on the radio version installed in your Renegade.

In-depth Input Instructions for Renegade 2019

To input the code on your 2019 Jeep Renegade's Uconnect 7.0":

  1. Ignition ON. Screen displays "ENTER CODE" or ----.
  2. Tap the touchscreen keypad to enter each digit of the 4-digit code.
  3. The radio unlocks automatically after entering the 4th digit.

Lockout: 3 wrong attempts = 60-minute lockout. Keep ignition ON. Do not turning off the ignition during the lockout period.

Entering Process

Once the unlock code has been retrieved for a 2019 Renegade Uconnect head unit, it can be entered directly at the dash - no scan tool or dealer visit required. On the BU Renegade many owners also report finding the original 4-digit code on a small sticker inside the glovebox (labelled "Anti-theft radio code") so that location is worth checking first.

  1. Limited attempts: Mopar/Uconnect head units only accept three incorrect tries before the radio enters a WAIT state, so confirm every digit before pressing it.
  2. Place the ignition in RUN/ACC so the radio powers up but the engine stays off.
  3. Wait for the display to show CODE, Please enter Anti-Theft Code, or a similar prompt.
  4. On the 8.4-inch Uconnect 4C NAV, tap the on-screen number pad to enter each of the four digits and confirm with the on-screen OK/Enter button.
  5. On the 7-inch Uconnect 4, use the on-screen keypad - or, on the base 5-inch radio, the numbered preset buttons (1-6) on the fascia - to key the code in sequence as the unit prompts.
  6. If WAIT appears after wrong attempts, leave the radio powered with the ignition in RUN for the documented cool-down period (about 30 minutes; the vehicle may be driven during this time) before trying the correct code again.

Serial Number Location Guide for Jeep Renegade 2019

The initial step is locating the radio serial number.

Most drivers assume the code depends on the Jeep model or year, but actually, the whole process depends on the unique radio's serial number.

Each radio has its own serial tied to the security system.

This is actually better, because if you have an aftermarket radio, the VIN or other Jeep-specific data wouldn't be of much use.

Depending on the radio used, you may be able to retrieve the serial directly from the screen or by checking the label on the radio chassis.

Factory Radios on the 2019 Jeep Renegade

The 2019 model year follows the BU Renegade's 2018 facelift, and the Italian-built Fiat plant (Melfi) ships the car with the Uconnect 4 family of head units. Three screen sizes are spread across the trim ladder, with the supplier mix tilted more toward Continental and Magneti Marelli than the US-built Mopar units.

  1. Uconnect 3 / Uconnect 4 5-inch (entry head unit) - small 5-inch non-touch or basic touchscreen radio. Standard on the Sport trim. Visual ID: compact 5-inch screen with hard buttons surrounding the display, no Apple CarPlay or Android Auto on the base 5-inch variant.
  2. Uconnect 4 7-inch (UAG-style) - 7-inch touchscreen, non-NAV. Standard on Latitude, Altitude, Upland and most Limited trims. Visual ID: 7-inch display centred in the dash bezel with a small surround; Apple CarPlay and Android Auto are supported, but the home screen has no factory Map/NAV tile.
  3. Uconnect 4C NAV 8.4-inch (UAQ-style) - 8.4-inch touchscreen with built-in GPS. Optional on Limited and Trailhawk, often bundled with the BeatsAudio package. Visual ID: large 8.4-inch screen filling the dash opening, with a NAV/Map tile on the home screen and on-board maps bundled.

Field check: small 5-inch screen with surround buttons = base unit, 7-inch screen with no Map tile = 7-inch Uconnect 4, 8.4-inch with a Map tile = Uconnect 4C NAV.

Access Your S/N on the Radio Screen

These are the steps you need to follow for 2019 Jeep Renegade:

The 2019 Jeep Renegade features the Uconnect 7.0" touchscreen (RA2.1). The 7" Uconnect has a Dealer Mode for serial number retrieval:

  1. Turn ignition to ACC or ON.
  2. Press and hold the Temperature Up and Temperature Down buttons simultaneously for roughly 5 seconds.
  3. The Engineering Menu appears on the 7" screen.
  4. Navigate to: System Info → Target Main Data → Serial Number.

Note: On the 7" Uconnect, the menu path is a bit different from the 8.4" version. Look for "Target Main Data" instead of "Radio Part Info".

Releasing the Radio to Access the S/N on the Tag

If the serial number cannot be accessed on-screen, use the removal method.

Most Jeep Renegade original radios include a tag with the serial number printed on the casing.

Steps:

  1. Turn off the vehicle.
  2. Remove the trim surrounding the radio.
  3. Loosen the fasteners.
  4. Move the unit forward to access the label.

The serial number is usually located near the manufacturer sticker.

If Dealer Mode is unavailable on your 2019 Jeep Renegade, pull out the radio to access the serial label:

  1. Turn off the vehicle.
  2. Pry off the dashboard bezel around the 7" display. Use a plastic trim tool to prevent scratching.
  3. Unscrew the 4 mounting screws (Torx T20).
  4. Pull the radio out to access the serial label on the chassis.

The 2019 Renegade's dashboard is relatively tight. Work carefully when prying off the trim to avoid breaking the fasteners.

View Serial by Pulling Out the Radio Unit

For the 2019 Renegade the most reliable way to read the radio serial is to pull the head unit and read the printed sticker on the chassis. The Italian-built BU Renegade uses a centre stack bezel with the climate cluster directly underneath the radio, so a careful, methodical removal is important.

  1. Safety first: turn the ignition off, take out the key, disconnect the negative battery terminal, and wait several minutes before touching wiring; never disturb the yellow airbag/SRS connectors and use plastic trim tools so nothing shorts or breaks.
  2. Tools you will need: plastic trim removal kit, Phillips and small Torx bit set, 7mm/10mm socket set, flashlight; some BU Renegade owners also report needing a pair of DIN radio release keys for the smaller 5-inch unit.
  3. Removal overview: pop the centre stack bezel free with a plastic pry tool starting from the lower edge, working up the sides. The bezel sits next to the climate vents, so keep finger pressure even.
  4. Releasing the radio: remove the screws (typically four, two upper and two lower) holding the radio cage to the dash support bracket, then slide the head unit rearward.
  5. Disconnect carefully: release the antenna lead and the multi-pin power/data connectors on the back of the unit before extracting it fully.
  6. Find the label: the serial number is printed on a barcode/sticker label on the top or side of the chassis, alongside the part number and supplier markings (Continental, Magneti Marelli, Visteon or Harman).
  7. Tips: photograph the label up close and double-check ambiguous characters such as 0/O, 1/I and B/8 before submitting the serial. If working around airbag wiring is uncomfortable, have a professional installer take the unit out for you.
Jeep Renegade 2019 radio serial number label location

Example: Jeep Renegade serial number label location

What a Valid Serial Number Looks Like

The 2019 Jeep Renegade with Uconnect 7.0" has:

  • T00AM – Primary Harman prefix
  • T00BE – Continental version

Radio designation: RA2.1 (Uconnect 7.0" touchscreen). The Renegade shares an identical radio platform with other Stellantis compact vehicles. Serial: 14 characters, alphanumeric.

The serial format is the same across all Uconnect screen sizes – only the Dealer Mode button combo differs.

Typical Serial Number Formats for 2019 Renegade Radios

The factory radios fitted to the 2019 Renegade can carry serials in a few different styles because the Italian-built BU uses a different supplier mix to the US-built Mopar/Uconnect cars. The exact prefix depends on which Uconnect tier shipped with the car and whether the unit was built by Continental, Magneti Marelli, Visteon or Harman, so the printed sticker on the chassis is the authoritative reference.

Uconnect 4 7-inch and Uconnect 4C 8.4 (NAV)

  1. Often a 14-character alphanumeric string printed on the chassis label.
  2. Continental-built variants are commonly seen with an A2C prefix, while Mopar-style units may begin with T (for example T00AM, TM9 or TQ1).
  3. Usually a continuous run of letters and digits with no dashes or spaces.

Base 5-inch radio

  1. Owner reports describe shorter 5-digit numeric serials or A3C-style codes printed on the back of the chassis.
  2. The label on the unit itself is the authoritative reference; copy the serial exactly as printed and avoid guessing characters that look unclear.

Fixing Common Code Entry Problems for 2019 Renegade

When a code is rejected on the Uconnect 7.0" usually means a serial number mismatch. The 7" (RA2.1) serial is 14 characters, starting with T00AM or T00BE. The P-number (P... or 68...) is also shown on the label but generates no code.

Dealer Mode is the recommended approach to confirm the serial on the Renegade and Compass before placing your order. Contact support for a free re-check if anything seems wrong.

The 7" Uconnect on the 2019 Jeep Renegade includes on-screen serial retrieval via the Engineering Menu: hold Temperature Up + Temperature Down for 5 seconds, then go to System Info → Target Main Data → Serial Number.

  • Serial number — 14 characters, prefixed by T00AM or T00BE. Submit this.
  • Part number — starts with P or 68. Not the serial.

Note that on the 7" Uconnect, the menu path says "Target Main Data" rather than "Radio Part Info" — that is normal for this system, not an error.

After 3 wrong attempts on the 7" Uconnect activate a 60-minute lockout. The screen shows "WAIT" or ceases accepting input. To handle the lockout:

  1. Keep the ignition ON for the entire 60 minutes.
  2. Turning off the ignition at any point resets the lockout counter.

The 7" Uconnect lockout is the same as the other Uconnect platform variants. Do not rush — the timer only counts while power is on.

If the 7" Uconnect does not show after a battery event:

  • Make sure the ignition is fully ON and allow 15–20 seconds for the RA2.1 system to boot.
  • Check the fuse panel — a blown fuse prevents the display from powering up.
  • On the Renegade and Compass, the button press for Engineering Mode does not affect the code prompt — the prompt appears when the radio starts normally after a power loss.

If nothing appears, check the fuse before anything else.

The Uconnect 7.0" (RA2.1) uses the touchscreen exclusively for code entry — no hardware number buttons are involved in the process. When the code entry prompt is on screen:

  • Tap each digit on the virtual number pad.
  • The radio unlocks after the 4th digit — no submit step is needed.

Note that the Engineering Menu (Temperature Up + Temperature Down hold) is for serial retrieval only — this is not how you enter the code.

What Caused the Radio to Lock?

The 2019 Renegade encounters radio lockouts most commonly from:

  • Battery disconnect or replacement — the primary cause on all Uconnect platforms, including the 7" system.
  • Dead battery from urban use — compact crossovers with frequent short trips can experience battery drain from heavy infotainment use on short journeys, causing the anti-theft to activate.
  • Blown fuse — a blown radio fuse interrupts power and causes the code request.
  • Used purchase — the Renegade is a popular budget-friendly used crossover, and the code is often missing at time of purchase.

Your code is permanently linked to the radio serial and does not expire.

Get Your Jeep Renegade 2019 Radio Code Now