How to Get 2017 Chrysler Pacifica Radio Code [Guide]

Radio showing CODE? Your Chrysler Pacifica 2017 can be unlocked quickly using the radio serial. Enter it in the form and use the steps below if you need guidance.

Delivery is instant in most Chrysler Pacificas.
In rare cases, Chrysler Pacifica radio code delivery can take up to a day.

We offer a full refund if the code doesn't work.
Just follow our simple verification steps.
Check the Refund Policy page for more information.

You only need your serial number from the radio.
No documents required.

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

T0MYD164822563 (T0MYD)
T00BE351823197 (T00BE)
TM9341100221 (TM9)
Dealer price $120 92% Off!
Our price: only $19.99
Secure Payment
Get Code Instantly
263+ Reviews
See reviews →
Guaranteed refund if the code is invalid
Chrysler Pacifica 2017 car photo
How to find Chrysler Pacifica 2017 radio serial number

Understanding the Radio Serial Number and How to Locate It on 2017 Pacifica

The initial step is locating the radio serial number.

Most drivers assume the code depends on the Chrysler model or year, but actually, the unlock process depends on the unique radio unit's serial number.

This number identifies the exact head unit installed in your Chrysler Pacifica.

This is even better, because if you have an aftermarket radio, the VIN or other Chrysler-specific data wouldn't be of much use.

Depending on the radio version used, you can retrieve the serial directly from the display or by looking at the label on the radio chassis.

Factory Radios on the 2017 Chrysler Pacifica

The 2017 Pacifica was the launch year for the all-new RU minivan platform that replaced the long-running Town & Country. From the factory, FCA fitted three Uconnect 4 / 4C head units across the LX, Touring, Touring-L, Touring-L Plus and Limited trims, all using a common centre-stack bezel.

Common factory units on the 2017 Pacifica

  1. Uconnect 4 with 5-inch display (UAG) - 5-inch base touchscreen, no built-in navigation; standard on lower trims such as LX and base Touring.
  2. Uconnect 4 with 8.4-inch display (UCQ) - 8.4-inch touchscreen with Apple CarPlay and Android Auto, but no factory-activated navigation; common on Touring-L and Touring-L Plus.
  3. Uconnect 4C NAV with 8.4-inch display (UAQ) - 8.4-inch touchscreen with factory navigation, HD Radio, SiriusXM Travel Link, plus Apple CarPlay and Android Auto; top-tier option, frequently fitted to Limited.

Identifying which one you have

  1. Look at the screen size first - the 5-inch screen is the UAG; an 8.4-inch screen is either the UCQ or UAQ.
  2. If the 8.4-inch home screen shows a native Nav tile and gives turn-by-turn guidance, you have the UAQ.
  3. If the 8.4-inch unit has CarPlay/Android Auto but no factory nav button, it is normally the UCQ.
  4. The Uconnect Theater rear-seat entertainment package is a separate option and does not change the front head-unit code.

Access Your Serial via the Radio Screen

Try the following for your 2017 Chrysler Pacifica:

The 2017 Chrysler Pacifica — Chrysler's all-new minivan built on an entirely new platform — is equipped with the Uconnect 8.4" Classic (RA3). The Pacifica positions the 8.4" screen at the top of the center stack relative to earlier minivans, with the climate controls directly beneath the screen.

Press and hold Climate Up, Climate Down, and Front Defrost simultaneously for 5 seconds with ignition in ACC or ON. Dealer Mode opens. Go to: System Info → Radio Part Info → Serial Number.

Find Your Serial Number on the Radio Display

2017 Pacifica trims fitted with the 8.4-inch Uconnect 4 / 4C can usually show their serial number through a hidden dealer/diagnostic menu, which is much faster than dropping the head unit out of the dash. The shortcut below is widely documented on Pacifica owner forums for this generation.

Uconnect 4 (UCQ) and Uconnect 4C NAV (UAQ) - 8.4-inch

  1. Place the ignition in the RUN position so the touchscreen powers up fully.
  2. Press and hold the driver's temperature UP, temperature DOWN and front DEFROST buttons together for around 7 seconds.
  3. The hidden dealer/diagnostic menu should appear on the 8.4-inch display.
  4. Open the radio-information entries (typically near the top of the list) - they show the serial number along with software/hardware revisions.
  5. Write the full serial down exactly as shown, including any prefix letters such as T0 or TM9.
  6. Press Done/Back or cycle the ignition to leave the menu.

Uconnect 4 with 5-inch display (UAG)

For the 5-inch base unit, on-screen retrieval of the radio's internal serial through the same dealer-mode shortcut is not consistently reported on the 2017 Pacifica. If the menu does not surface a serial entry on this radio, fall back to the chassis-label method described in the removal block.

Pulling Out the Radio to View the S/N on the Tag

If the serial number cannot be accessed through menu, use the pull-out method.

Most Chrysler Pacifica original radios include a sticker with the serial number printed on the housing.

Steps:

  1. Turn off the vehicle.
  2. Detach the trim surrounding the radio.
  3. Unscrew the fasteners.
  4. Move the unit slightly out to access the label.

The serial number is usually located near the barcode.

If Dealer Mode is unavailable on the 2017 Chrysler Pacifica Pacifica, the RA3 unit must be physically removed from the high-mounted dash position. The Pacifica's tall center console allows access once the trim is removed.

  1. Remove the bezel panel with a plastic trim tool.
  2. Remove the 4 Torx T20 mounting screws.
  3. Slide the unit forward to find the serial label on the side or back of the chassis.

Keep in mind: the Pacifica has a unique trim removal sequence compared to older Chrysler minivans — check a model-specific guide if unsure.

View Serial by Pulling Out the Radio Unit

If the hidden menu does not show a serial number, or the radio is fully locked at the CODE prompt, the most reliable way to read the serial on a 2017 Pacifica is to remove the head unit and read the printed label on its chassis.

Safety first

  1. Switch the ignition fully off and remove the key fob from the cabin.
  2. Disconnect the negative terminal of the 12V battery.
  3. Wait at least a few minutes before working near the dash so airbag circuits can fully discharge.
  4. Avoid pulling on any yellow airbag-related wiring while you work behind the bezel.

Tools you will likely need

  1. Plastic trim/panel removal tools to lift the centre-stack bezel without scratching the dash.
  2. A 7 mm socket or appropriate Phillips/Torx driver for the radio retaining fasteners.
  3. A pen and a phone camera to record the serial label clearly.

Removal overview

  1. Begin by gently prying off the lower trim around the climate / shifter area; the 2017 Pacifica centre-stack trim is held in place mainly by spring clips, so work around the edges.
  2. With the lower bezel free, undo any small screws revealed behind it and ease the upper radio bezel forward.
  3. Disconnect any HVAC, switch or USB connectors on the back of the bezel as it comes off.
  4. Remove the screws that secure the radio chassis to the dash frame.
  5. Slide the radio out toward you and unplug the wiring harnesses and antenna lead from the back.

Where the serial is printed

  1. Look at the top, side or rear face of the metal chassis for a thermal-printed white or silver label.
  2. The label shows a part number, a barcode and a serial number - copy down the alphanumeric string that begins with letters such as T0, TM9 or similar.

Tips

  1. Photograph the label rather than relying on handwriting - the characters can be easy to misread.
  2. Reinstallation is the reverse: connect harnesses, screws home, snap the bezel back in, then reconnect the battery.
Chrysler Pacifica 2017 radio serial number label location

Example: Chrysler Pacifica serial number label location

Typical Serial Number Formats for 2017 Pacifica Radios

Year Chrysler Pacifica RA3 radio serial patterns:

  • T00AM – Harman VP2 RA3 (primary format on Pacifica)
  • T00BE – Continental-manufactured version
  • TM9 – Earlier Harman production

Serial is 14 alphanumeric characters. Skip the part number (starts with P05064 or 68).

Typical Serial Number Formats for 2017 Pacifica Radios

The radios fitted to 2017 Pacificas were supplied by different manufacturers, and each tends to use its own serial-number style. The patterns below are typical of what owners and unlock services commonly report for this generation, but the exact prefix on your unit can vary by supplier batch.

Continental / Harman-built Uconnect 4 and 4C

Many 8.4-inch Uconnect head units in this era are reported with a T0-style prefix (for example T0xxx followed by a string of digits). The prefix is printed inline with the rest of the serial on the radio's label.

Panasonic-built Uconnect units

Other 2017 Pacifica head units instead carry a TM9-style prefix, typically followed by additional alphanumeric characters. This pattern has been widely associated with Panasonic-supplied Mopar radios across the Uconnect 4 era.

Uconnect 4 with 5-inch display (UAG)

The base 5-inch radio's serial is also printed on the chassis label, though the prefix can vary by supplier batch, so it is safer to read the full string off the label rather than assume a fixed format.

If the serial you read does not match any of these patterns, double-check by comparing against the part number - the serial line is usually the longest alphanumeric string and is the one tied to the barcode.

Code Entry Process for 2017 Pacifica

Once you receive the correct unlock code based on the serial number, you can restore default functionality by entering it into the unit.

The code entry process depends on the radio interface, but most 2017 Pacifica systems follow a similar structure using preset buttons, touch controls, or rotary knobs - depending on if it's a factory or an aftermarket unit.

You will typically see CODE displayed on screen.

Step-by-Step - Correct Entering Process

To unlock on the 2017 Chrysler Pacifica Uconnect 8.4":

  1. Turn ignition to ON. The screen shows "ENTER CODE".
  2. Use the on-screen keypad to enter each digit of your 4-digit code.
  3. Radio auto-confirms after the 4th digit. No confirm button needed.

3 wrong attempts cause a 60-minute lockout. Keep ignition ON for the full wait. Turning off the ignition restarts the timer.

Step-by-Step Code Input Guide

Once you have the correct anti-theft code for your 2017 Pacifica radio, the entry process itself is straightforward, but the unit will lock you out for an extended period if you make repeated mistakes.

Limited Attempt Warning

You usually only get three attempts. After three successive wrong codes the radio enters a WAIT state and the display shows WAIT. To clear it, the radio must remain powered with the ignition in RUN for a continuous 30 minutes (the vehicle may be driven during this time). Cycling the key off does not bypass the timer - confirm the code matches the serial you actually read off this radio before you start.

Entering the code

  1. Turn the ignition to RUN or ACC so the radio powers up and shows the CODE / Anti-Theft prompt.
  2. On the 8.4-inch Uconnect (UCQ/UAQ), enter each digit by tapping the on-screen number pad.
  3. On the Uconnect 4 with 5-inch display (UAG), enter the code using the on-screen keypad on the small touchscreen.
  4. Confirm with the OK/Enter on-screen control or the equivalent hard button.
  5. If accepted, the radio returns to its normal home screen and audio resumes.

If it does not work

  1. Stop after the second wrong attempt and recheck the serial you used to obtain the code.
  2. Make sure no leading or trailing characters were dropped from the serial.
  3. Wait out the 30-minute lockout if WAIT appears - cycling the key off does not shortcut it.

Locked Pacifica Radio? Here's Exactly How to Get the Code

Vehicle radios use security codes dependent on the radio unit itself instead of the model or production year.

  • The generator identifies your Chrysler radio via serial-based verification.
  • Once the serial number is submitted, the system identifies the radio unit and generates the code that you need.
  • Use the code to unlock the radio immediately.
  • This approach saves time compared to traditional methods for 2017 Chrysler Pacifica.

What Caused the Radio to Lock?

The 2017 Chrysler Pacifica radio activates its anti-theft after power is cut. A common scenario on minivans during battery replacement or following electrical repairs.

Typical trigger: battery replacement or disconnect. Other causes:

  • Blown fuse after electrical work
  • Buying the Pacifica used without a known code
  • Battery disconnect for service
  • Battery dead from storage

The code comes from the radio serial number only — not the VIN.

Understanding Unlock Issues with Your Pacifica

3 wrong entries lock the Pacifica RA3 for 60 minutes. Keep ignition in ON or ACC. Turning off restarts the timer.

The Pacifica Uconnect RA3 uses touchscreen-only code entry. Tap each digit on the on-screen keypad. No physical buttons needed. Auto-unlocks after the 4th digit.

The radio chassis label: serial = 14 chars starting with T00AM, T00BE, or TM9. Part number starts with P05064 or 68 — skip it.

If no code prompt appears, the lock hasn't fired. Force it by briefly disconnecting the battery, then reconnect and turn to ON.

The Pacifica RA3 label carries both serial and part number. Serial: 14 chars, starts with T00AM, T00BE, or TM9. Part number (do not use): starts with P05064 or 68.

Double-check the label. Contact support for a free re-check if needed.

Get Your Chrysler Pacifica 2017 Radio Code Now