Generate Dodge Grand Caravan 2013 Radio Code : Instant Unlock⚡

Radio showing CODE? Your Dodge Grand Caravan 2013 can be unlocked quickly using the radio unit's serial. Enter it in the form and use the steps below if you need guidance.

You'll usually get your Dodge Grand Caravan code in seconds.
In rare cases, Dodge Grand Caravan radio code delivery can take up to a day.

You're covered by a 100% money-back guarantee.
A proof that the code failed may be required.
Check the Refund Policy page for more information.

Serial Number Patterns:

Your radio serial may start with: T00AM, T00BE, TM9, T0MYD, A2C, TQN, TVPQN, T0071, T00AD

Serial Number Examples:

T00BE351823197 (T00BE)
TM9341100221 (TM9)
T0MYD164822563 (T0MYD)
Dodge Grand Caravan 2013 car photo
How to find Dodge Grand Caravan 2013 radio serial number
Dealer price $120 92% Off!
Our price: only $19.99
Secure Payment
Get Code Instantly
259+ Reviews
See reviews →
Full refund if your code fails

Why Is the Radio Asking for a Code?

Full-size minivan owners most frequently encounter this because of:

  • Heavy family use and battery strain — The Grand Caravan's role as a family hauler with multiple USB chargers, entertainment screens, and rear fans puts extra strain on the battery, increasing replacement frequency and every replacement triggers the code.
  • Long periods parked — Grand Caravans sitting unused for days or weeks can lose enough charge to trigger the anti-theft.
  • Battery replacement — routine battery service triggers the lock.
  • Used purchase — Grand Caravans are frequently bought and sold used, so buyers find the radio locked at purchase.

The unlock code is permanently tied to the serial number and never changes.

Step-by-Step Dodge Grand Caravan 2013 Radio Code Retrieval Guide

  • Rather than relying on Dodge dealership lookup or online threads you can find the code online with the radio S/N.
  • First locate the serial number. The best place to search is on the unit itself, and in some cases it can be visible on the Grand Caravan's radio screen.
  • Enter it into the field above, and our software will calculate the correct 2013 Grand Caravan unlock code.
  • After receiving your code, type it in using Grand Caravan's radio buttons to release the blockade fully.
  • The entire process takes just a short moment and requires minimal effort.

Can't Find Your Unit's Serial Number? Follow These Steps for Dodge Grand Caravan 2013

The first step is to find and write down the radio's serial number.

Depending on the radio unit installed in your 2013 Grand Caravan, the serial can be found either through the display menu or by pulling the unit out and checking the label on the radio itself.

Below are the most common methods to identify your serial the right way.

Factory Radios on the 2013 Dodge Grand Caravan

The 2013 Grand Caravan was offered with three legacy Mopar head units plus an optional rear-seat DVD entertainment module - the Uconnect 8.4 RA3/RA4 platform that arrived elsewhere in the Chrysler/Dodge range never came to this minivan. Identify yours below:

  1. RES (Media Center 130) - base AM/FM/CD radio. Non-touchscreen unit with a small one-line monochrome display, hard preset buttons across the bottom and large rotary knobs for tune and volume. No NAV button, no large screen, no factory Bluetooth. Standard on AVP/SE - the most common factory fit overall.
  2. RBZ (Media Center 430 MyGIG) - 6.5-inch touchscreen, no nav. Mitsubishi-built color touchscreen with a glossy black bezel and hard keys for Radio, Media, Controls, More and Phone flanking the screen. There is no NAV soft key on the home menu because the unit has no navigation hardware. Standard on Crew/R/T, optional on SXT - the dominant touchscreen variant.
  3. RHB (Media Center 430N MyGIG) - 6.5-inch touchscreen with Garmin nav. Externally identical to the RBZ - same Mitsubishi-built screen, same bezel, same hard buttons. Tell it apart on screen: a NAV soft key on the home menu, a Garmin splash logo at boot, and a 28GB internal hard drive for stored music. Optional top-tier choice and the rarer of the two touchscreen units.
  4. Optional rear-seat DVD entertainment. A separate 9-inch flip-down headliner screen with its own DVD player in the lower dash and wireless IR headphones; orderable on Crew/R/T independently of which head unit was specified.

Access Your S/N via the Radio Screen

The method for 2013 Dodge Grand Caravan is this:

The 2013 Dodge Grand Caravan is Dodge's full-size minivan and comes equipped with the Uconnect 8.4" (RA3) touchscreen. The serial number is retrievable without removing the radio through Dealer Mode.

Climate Button Method:

  1. Turn the ignition to ACC or ON.
  2. In the Grand Caravan's center console, the Climate Up, Climate Down, and Front Defrost buttons sit below the 8.4" display. Press and hold all three simultaneously for 5 seconds.
  3. Dealer Mode opens on screen.
  4. Go to: System Info → Radio Part Info → Serial Number.

Alternative Method: Hold Temperature Up (red) and Temperature Down (blue) together for 5 seconds to access Engineering Mode, then navigate to the serial.

Releasing the Radio to See the S/N on the Tag

If the serial number cannot be accessed on-screen, use the hardware method.

Most Dodge Grand Caravan OEM radios include a label with the serial number printed on the chassis.

Steps:

  1. Switch off the vehicle.
  2. Remove the bezel surrounding the radio.
  3. Release the clips.
  4. Pull the unit slightly out to access the label.

The serial number is usually located near the barcode.

Should Dealer Mode be unavailable on your 2013 Grand Caravan, the RA3 radio must be removed to see the serial label. The Grand Caravan's spacious center console provides good access for this work:

  1. Remove the center stack bezel – The Grand Caravan's trim panel covers the display and HVAC area. Trim removal tool pops off the friction-clipped panel — begin at the lower corners.
  2. Remove the 4 Torx T20 screws – Located at radio mounting frame corners.
  3. Slide the radio out – Ease the unit out to reveal the serial label on the side or top surface.

The 14-character serial is on a barcode sticker. The harness can remain plugged in.

Locate Serial on Grand Caravan's Radio Chassis

The factory radios fitted to the 2013 Grand Caravan - typically the RES single-CD head unit, the RBZ MyGIG 430 (6.5-inch touchscreen), the RHB MyGIG 430N (6.5-inch touchscreen with Garmin navigation), and the optional REZ rear-seat DVD entertainment module - all carry their serial number on a printed chassis label. Because these legacy units do not expose the serial through the screen, the head unit needs to come out so the sticker on the case can be read.

  1. Safety first: switch the ignition off, remove the key, disconnect the negative battery terminal, and wait several minutes before touching wiring; never disturb the yellow airbag/SRS connectors and use plastic trim tools so nothing shorts or breaks.
  2. Tools you will need: plastic trim removal kit, Phillips screwdriver, small Torx bit set, flashlight, and a 7 mm socket on hand if any retaining bolts need backing out further into the dash.
  3. Ease the centre dash bezel forward at the lower edge using a plastic trim tool and work up the sides; on the post-2011 Grand Caravan dash it is held in by four friction clips with no visible screws on the bezel itself.
  4. Once the four clips release, set the bezel aside on a soft cloth - on this body it does not need to be unplugged from any harness to do the job.
  5. Remove the four screws securing the radio chassis to the dash bracket.
  6. Slide the radio forward and disconnect the antenna lead and the multi-pin power/data harnesses on the rear of the unit.
  7. The serial number is printed on a barcode/sticker label on the top or side of the radio chassis, alongside the part number and Mopar/supplier markings; the optional REZ rear-seat DVD module wears the same kind of label on its own case.
  8. Photograph the label up close in good light and double-check ambiguous characters such as 0/O and 1/I before submitting the serial.
Dodge Grand Caravan 2013 radio serial number label location

Example: Dodge Grand Caravan serial number label location

Standard Serial Number Patterns on This Radio

Year Dodge Grand Caravan Uconnect 8.4" (RA3) serial number prefixes:

  • T00AM – Harman VP2 (most common format for this minivan)
  • T00BE – Continental variant
  • TM9 – Older Harman units

The Grand Caravan uses the RA3 radio platform (VP2 with optional upgraded audio). Serial length: 14 characters.

Important The Grand Caravan's label also carries a part number (P05064... or 68...). Use only the serial to generate the unlock code.

Typical Serial Number Formats for 2013 Grand Caravan Radios

The factory radios fitted to the 2013 Grand Caravan are legacy Mopar head units rather than the later Uconnect 8.4 platform, so the prefix on the chassis label varies with which radio was specified and which supplier built it.

RBZ MyGIG 430 and RHB MyGIG 430N

  1. These Mitsubishi-built MyGIG units typically print an alphanumeric serial on the case sticker.
  2. Common Mopar/MyGIG prefixes seen on this generation include TM9 alongside other T-style codes.
  3. The serial usually runs as a continuous block of letters and digits with no dashes or spaces.

RES (single-CD)

  1. The base RES head unit usually carries a Mopar-style serial on a chassis sticker.
  2. Treat the printed label on the unit itself as the authoritative reference and copy each character exactly.

REZ rear-seat DVD module

  1. The optional REZ overhead DVD entertainment unit also wears a printed chassis label with its own serial.
  2. If codes are needed for that module, transcribe its serial separately and avoid guessing unclear characters.

Entering the Radio Security Code

Once the system gives you 2013 Dodge Grand Caravan unlock code from the S/N, you're ready to reactivate the radio.

Some drivers get stuck at this stage because input process can look different across radio versions, but it's usually simple.

When the radio shows dashed lines, it means the unit is waiting for the correct numbers.

Correct Entering Process

To unlock the Grand Caravan's radio using the Uconnect 8.4":

  1. Ignition ON. Screen presents "ENTER CODE".
  2. Tap the touchscreen number pad to enter each digit of the 4-digit code on the Grand Caravan's screen.
  3. The radio unlocks automatically after the 4th digit — no OK button needed.

Lockout: 3 incorrect entries = 60-minute lockout. Keep ignition ON. Turning it off extends the wait.

Step-by-Step Code Input Guide

Once the unlock code has been retrieved for a 2013 Grand Caravan radio, it can be entered straight at the head unit - no scan tool or dealer visit is required.

  1. Limited attempts: Mopar head units only accept a small number of incorrect tries (commonly three) before going into a long lockout/WAIT state, so verify each digit before pressing it.
  2. Place the ignition in RUN/ACC so the radio powers up while the engine stays off.
  3. Wait for the display to show CODE, Enter Anti-Theft Code, or a similar prompt.
  4. On the RBZ/RHB MyGIG (6.5-inch) units, key in the digits using the on-screen number pad; on the base RES head unit, press the numbered preset buttons (1-6) in sequence.
  5. Confirm the entry with the on-screen OK/Enter button on the MyGIG units, or with the tune/menu knob (or labelled enter button) on the RES.
  6. If WAIT or a similar timeout appears after the failed-attempt limit is reached, leave the radio powered with the ignition in RUN for a continuous 30 minutes before trying the correct code again.

Fixing Common Code Entry Problems for 2013 Grand Caravan

The Grand Caravan's Uconnect enters a 60-minute lockout after 3 wrong code attempts. The screen shows "WAIT":

  1. Keep the Grand Caravan's ignition ON — car can be off but ignition stays in ON.
  2. Allow the full 60 minutes.
  3. Cycling the ignition restarts the countdown.

After the 60 minutes, re-enter the correct code.

The Grand Caravan's Uconnect 8.4" uses touchscreen-only input for code entry — no preset keys are involved. Once the locked screen appears:

  • Tap each digit on the on-screen keypad.
  • The radio confirms after the final number — no "Enter" key is needed.

If the touchscreen is sluggish, restart by turning the ignition off and back on.

A code rejection on the Grand Caravan's Uconnect typically points to a serial number mismatch. The RA3 label has the serial (T00AM, T00BE, or TM9, 14 characters) and the part number (P... or 68...) on the same sticker — just the serial generates the unlock code.

Verify the serial via Dealer Mode or the physical label and reach out for a free re-check if needed.

If no "ENTER CODE" appears after a battery event:

  • Make sure the ignition is in ON (not ACC) and allow a moment for the system to initialize.
  • Inspect the radio fuse — fuse failure stops the radio from powering on.
  • Certain models may need a screen tap to bring up the code entry prompt.

Should nothing appear, a blown fuse is the first thing to investigate.

The Grand Caravan's RA3 radio label shows multiple identifiers:

  • Serial number — 14 characters, starts with T00AM, T00BE, or TM9. Use this one.
  • Part number — begins with P05064 or 68. Not needed.

For the Grand Caravan, Dealer Mode gives the serial directly: System Info → Radio Part Info → Serial Number. No physical access required.

Get Your Dodge Grand Caravan 2013 Radio Code Now